King's X

Unless you build one for you needs. I have built a couple of 'couch' stitching ponies. I am attaching a couple of photographs for you. http://farm1.static.flickr.com/160/373211629_47c45ae8cb.jpg My favorite and still in use.... http://blog.artifactbags.com/wp-content/gallery/stitching-horse-vs-stitching-clam/antique-stitching-clam.jpg and of course, to help you understand how they are made.....minus the language barrier....here is a short video http://www.fineleatherworking.com/blog/making-a-sewing-clam/ Hope this helps.

Welcome to the forum

It looks like some form of soldering system with knobs to elevate the heat levels. You could do the same with a soldering iron. There is a company in South Korea (I think) on eBay that is selling edge tips in various widths to be used in your soldering iron. Good luck.

Welcome to the forum Steve!

Welcome to the forum Sonni. I took a look at your work and must say that the sheath are some very nice work. Keep it up!

Welcome to the forum Moon75. Please make sure to share your photos and experiences!

Welcome to the forum Tyler. Good luck on your blogsite. I have one for quite a number of years and it has been great to share my work with the world.

Welcome to the forum Abbyanna. Nice work!

I use a thin piece of leather with a tight grain and glue it to a flat and true board. I add a light coat of neatsfoot oil and when it soaks in, I rub my green rouge onto the leather strip. On the go, I use a piece of left over poster board or a business card to rub Green or White rouge for stropping. Hope this helps.

Ditto with Clint.

Look me up on FB and join the circle. I have quite a few people from Spain. Tandy Leather Factory just opened a new store in Spain. Maybe I can help connect you to some of those friends to guide you.

hello Rick.....Welcome to the forum!

Cuero curtido vegetal

Welcome to the forum. Are you on Facebook? I have quite a few friends from Spain. Let me see if I can get that answer for you!

I lightly wet my leather before applying the resolene. Does basically the same thing.

Hello Bill.....welcome to the forum. Get ready to spend a lot of time researching and ready on here!

Nice work you have there.....Welcome to the forum!

Hello Tadhg.....Welcome to the forum!

Looks great....nice finish!!

Welcome to the forum. Thanks for sharing photos of your work.

Nice work Paul.....really clean!

Triple ditto on contacting Bruce. You can also check his website at www.brucejohnsonleather.com

Hello Mike.....Welcome to the forum!

Hi Laurie! Welcome to the forum.

try Clay Miller who can be found on here or on Facebook at Clay Miller Tools. He has made custom tools for me in the past to include a BW that is smaller than any Tandy one sold.