klutes

I want the liner to be permanently attached. Small cross body purse

What is the best glue to use when glueing cloth to inside of a bag. Chrome tan leather. I am currently using 3M 77 not sure how long it will hold. I am sure this has been discussed on here so if someone can point me in the right direction to find it I would appreciate it. Thanks

Sold

Thanks Mike

Can someone direct me to a good pattern for a fanny leather pack. Looking for something like the photos.

Sounds like a good buy. I own one just like it. Nice machine.

I use it on embossed belts with no problem

When using veg tan leather for bag straps. What is the preferred method of staining or painting the edges to assure no rub off clothing. When making belts I prefer stain to get the look I want. with couple of coats of sealer to stop rub off. but on tote bags I am a little more worried about rubbing off on someones nice coat or blouse. what do you bag makers do. And yes I prefer the veg tan for straps vs the pull up leather that the bags are made of. Thanks

Interesting concept. Keep us posted if you follow through with it. Only issue I see is there enough clearance in the throat.

This machine now has a clutch motor on it and has been reduced to $900.

Thanks . I can handle drilling and tapping holes ok. Just wanted to make sure I wasn’t going to damage something inside the machine doing this. Course if the metal is thick enough for a blind hole it shouldn’t be a problem.

Just got a Consew 206rb machine. Wanting to install a edge guide on it. I would like to put the following on it. It would Require drilling and threading a couple of holes on the back of machine. Not real comfortable doing this. Has anyone else done this to their machine. Pictures and explanation of the steps would be greatly appreciated. If this is a no no please advise. Thanks

Still available

Sorry $1150

It has been gone through by a professional shop and ready to sew. New servo motor and speed reducer. Sews great. Needs to Be picked up unless you only want to purchase the machine head.

I had one of these and sewed 1/4 to 5/16 pretty good. The only reason I sold mine was it would only handle up tp thread size 92 top and bottom. I could get 135 on top but not on the bottom. I wanted 135 top and bottom. Mine was set up with servo motor and speed reducer. its really a nice machine if you can live with the 92 thread. I will probably regret selling mine at some point. But not now.

Machines are sold

Bluzoom what thread size were you running.

Bump

The top is the 69. I am located in Winchester Ky.

I am selling two of my Adler. Nothing wrong with either just moving to a different machine. Both are older machines but gone through and in good sewing order. I have converted the 30-7 to a servo motor. 69 $1250. 30-7 $850

This is what I am running in my 69

I really like that pattern. Is this your design or copied from a certain tribe or culture

Welcome

Didn’t notice that small detail . Thnaks