Search the Community

Where are we getting a quality cutting surface for clicker dies? I've been getting by with cheap stuff... replacing pretty frequently. Today, I do a search, and it takes me to Tippman. So I guess I'll try that, and "add to cart", but - much like many sites - it won't let me see the shipping or expected time frame until after I "register" on the site. They talked themselves out of my business with that - I left. Here's the thing.. I"m just done 'signing up'. Signed up for something at tandy years ago, and still getting crap in the mail and email. Ordered once from cabela's.. got emails until I changed the email address. Went through all that at Weaver, just so they could send me some leather that .. well, let's just say that signing up at Weaver was a waste of time. Like so many others. Seriously.. I just want a cutting board to put under clicker dies that will last a bit without being an investment ...

We ordered a Weaver 4-ton manual clicker, but it just won't do what we want it to. We tried a couple of pulls on our cutting board, but no happiness happened. Stock photos of the unit abound, but we can send pics of this one if you are suspicious this is not brand-new. We are in for $1200; if you are looking at retail that's more like $1400, so there is a possibility of a bargain here for you. Local pick-up, or freight around $150ish depending on how far you are from southeastern Pennsylvania. E-mail leatherman54@hotmail.com or call John 215 514 1989. This little charmer needs to find a good home soon!

Greetings from Finland I would be able to get a clicker for small money that is in quite good condition. Except circuit board is broken/missing or similar (havent seen that yet). Owner haven't been able to find replacement part for that. Possible that its easy to fix pcb, but if not it would be possible to design new controller for the clicker. For me electronics and programming the logic is not a problem. Problem is that i don't know how clickers are working. What kind of logic there need to be Is there some kind of adjustable pressure sensor to recognize when it stops pressing and lift jaw up? If someone can explain whole working process of the machine for me (standard hydraulic clicker, movable jaw that is pressing from up).

Bought in September. Closed business needing this machine, so selling it to one lucky person who needs it! Images here: https://seattle.craigslist.org/tac/art/6091352456.html220 V Single Phase29.5″ x 15.75″ Cutting Space3/4″ Nylon Cutting BoardRotating HeadDead Man Switch System1.5 KW ( 2 H.P.) MotorCutting Speed: 0.08 m/sRange of Stroke: 5-75 mm (1/4″ - 3″)#46 Hydraulic OilElectronic Control SystemEura Drive Inverter Box W/Speed Control

Shop down sizing - I am going to start with listing these items but we will have more items come. If there is something in particular you are looking for let us know, we may have one. Clicker Herman Schwabe model D - $2500 Splitter - Fortuna SAS - $2200 Jacques Shear 50" - $2500 If interested please feel free to contact Monty or Eric at Walco Leather Co Inc. Located in NYC. Buyer will be responsible to arrange pick-up or shipping.

I have a Fipi 5 clicker for sale , 220 volt If interested I can send a few pictures.

I bought this from Weaver a month ago and unfortunately it isn't what I need to do the job. It has maybe 40 clicks total on it. Literally got it out of the box, set it up, clicked and realized it isn't going to do it - what I'm cutting is way too narrow and the die won't eject the slugs. So, my loss is your gain. It's all back in the box and ready to ship. You basically get a like new clicker with all the original stuff that came with it. I did mount a back stop on the clicking pad to align my work, so there are 4 very small holes (less than 1/8" diameter each). How does $900 plus actual shipping costs sound? Or you can pick it up in Toledo, Ohio. Call me or send me a message - Jesse (419) nine 57-402one I have several pictures but there isn't much to show - its a like new clicker press. If you want to see them just ask and I'll happily send.

SHOP CLOSING - A colleague is selling his equipment. His assessment puts the used equipment value around $250K but Dr. says he has to simplify and he has two other businesses (and we all know the leather business is involved!) - so he's looking to sell ALL for $60K. (He is not ready to break it up) All is located in Central Florida. I tried to attach a pdf but it was too big and couldn't get it reduced. A little hard to look at in list form like this but you can email me for a pdf copy > barcsaddlery@yahoo.com The list is not complete. He has a few more pieces of equipment to catalog and a lot of raw materials. If you're interested, please contact me and I can get photos and help him complete the inventory report. TYPE NAME/BRAND Serial # Model # Value Wire Stapler (2) General Staple Co 017604 L Glue Tape Machine Better Pack 8BP-116532 Weight Scale Pelouze P70 Eylet/Snap Fastener/Foot Pressed DOT Fastener Co. M236 Skiver (German) Fortuna-SAS 55393 Skiver (German) Fortuna-Werk 70095 Skiver (German) Fortuna-SAS 57436 Skiver (German) Fortuna-SAS 53807 Foil Stamp Machine (Electric) (Heat Press, Head 3x2) Cassco 1159-1685 HPS-2500 Hydraulic Cutting Press (3 phase Clicker, Hungary) Indusco C106.7 816 Hydraulic Cutting Press (3 phase Clicker,Canada) BATA Engineering 2944 MK2 12" Splitter (2) (1 operates, 1 needs repair) United Shoe Machinery Corp (USMC) A Metal Roll Rack on Wheels (Six Cylinders) 4' Cutting Table & Jaques Shear (MA) Hobbs Manufacturing Co 17838 Roller Style Embosser Dayton Electric Motor & Air Combined Brass Engraved Rollers for Embossing (75-80 Rollers) Exact Touch Edge Finisher Weaver Leather 74729 Spray Booth w/Exhaust Fan & Spray Trays (12) Spray Guns (7) Strap Edge Finisher/Buffer (Italy) Galli FCE-Brevetto N*20305/A-83 Cut Out Machine Western 2187 RMH Cut Out Machine Western 1230 RMH Flat Bed Sewing Machine (DBL Walk Fost) PFAFF 545 545-H4-6/01-CLPMN 767812 Sewing Machine Durkopp Adler 205/370 627365 K205990017-370 Sewing Machine (Japan) Consew CW-8603049 227R Sewing Machine SIMANCO-210556 W-866659 107W1 Snap Machine DOT-United CARR M-246-1602 M245-81C Snap Machine DOT-United CARR M-245-1993 Splicer/Strip Cutter Randall Machine Corp 1370 132 Splicer/Strip Cutter Randall Machine Corp 1425 132 Splicer/Strip Cutter Continental 740489 1025 Strap Trimmer/Beveler Randall Machine Corp G75109 NSB Bench Grinder 1/4hp Sears Craftsman 39719301 TYPE NAME/BRAND Serial # Model # Value Edge Embosser (German) Shine 286/236 Rivitor(Manual Foot Press) Weaver 12" Roller Press (Domer) Brand Stamper/Embosser (Electric, Heat,Air, Pressure) Ackergould Custom Table Buffer/Burnisher Marathon Electric Motor 4" Belt/6" Disc Sander DELTA P9649 31-460 Type/Tipo2 Royal Perforator Randall Nylon Hole 4 Hole Punch Burner (Gas & Electric) Large Selection of Metal Clicker Dies

My name is Emily, I've been working with finished leather since I was 14 years old. I now have my own shop and am growing my business with equipment. I am looking for a clicker, preferably hydraulic between 10 and 15 tons. #1 Would I be better off buying a new one or buying used? #2 What is your recommend brand? #3 If buying used, where should I begin looking? Thanks

COBRA 10 Ton Clicker for Sale. Priced to sell at $2,000. Buyer to pay shipping. Purchased new from Leather Machine Co for $3,450. Used only a handful of times. Must sell as taking up too much room. Located in Zimmerman, Minnesota. 220 V Single Phase 29.5″ x 15.75″ Cutting Space 3/4″ Nylon Cutting Board Rotating Head Dead Man Switch System 1.5 KW ( 2 H.P.) Motor Cutting Speed: 0.08 m/s Range of Stroke: 5-75 mm (1/4″ – 3″) #46 Hydraulic Oil (included) Electronic Control System Eura Drive Inverter Box W/Speed Control Tool Box W/Tools

COBRA 10 Ton Clicker. $2500. Used less than 20 times. Sold the business. Purchased New in 2013 from Leather Machine Co for $3,250.00 Specifications: • 220 V Single Phase • 29.5×15.75 Cutting Space • 3/4″ Nylon Cutting Board • Rotating Head • Dead Man Switch System • 1.5 KW Motor • Cutting Speed: 0.08 m/s • Range of Stroke: 5-75 mm • #46 Hydraulic Oil (included) • Electronic Control System • Eura Drive Inverter Box W/Speed Control • Tool Box W/Tools • 48 x 48 x 52 cm

For sale cobra 4 dream machine king cobra and a brand new never used clicker. All of these items are in Middleport Ohio. They used to belong to a member here Cheryl Crossan who died unexpectantly. The cobra is basically brand new used about twice. $2100.00 for both. Clicker comes with two maybe three dies. The clicker is a 12 ton. There are numerous other tools and leather up for sale also. Pm me if interested. Leather Wytch

Works great, comes with 220 phase converter. $2500.00

Shop down sizing - I am going to start with listing these items but we will have more items come. If there is something in particular you are looking for let us know, we may have one. Clicker Herman Schwabe model D - $2500 Splitter - Fortuna SAS - $2200 Jacques Shear 50" - $2500 If interested please feel free to contact Monty or Eric at Walco Leather Co Inc. Located in NYC. Buyer will be responsible to arrange pick-up or shipping.

Works great, comes with 220 phase converter. $2500.00

I am selling a Tippmann 1500 Die Cutting Press. It comes with the air accumulator which cuts your cycle time in half. I have built a custom table with castors for easy mobility. I will upload photos Monday when I get into the shop. It is in perfect running condition. I am asking for $2,500 plus shipping. Shipping can be organized through www.freightquote.com pretty easily. Attached is an image of the shipping setup (dimensions, weight, class, etc.) I would be shipping from Tacoma, Washington (98409) - local pickup also available.

https://1drv.ms/f/s!AvKbpw0L0slJpWEyo5lfqodGBJLL This a link to pictures of a small Pattern Press I have for sale Robin

Have these two dies I'm looking to sell. Bought these in February from Tippmann Industrial. Very new and very sharp. Had two of these sets made by accident and couldnt return them. Some examples of the products made with the help of these dies. $95 Shipped for the pair or $50 each http://imgur.com/a/z63TT http://imgur.com/e4P1OmE

Hello! I am looking for someone with a clicker to do a small project for me in the Columbus Ohio area. I have several hides and partial hides of 10 oz or so bridle type leather and one die about 4" X 5" ish. I need it clicked out sometime in the next month or so. I don't feel like shipping it all somewhere, so I'm looking for someone in the area who can do the clicking. Willing to travel a reasonable distance outside of the Columbus, Ohio area. Anyone fit this description? Email me at: info@branchlineleather.com or reply to this thread if you are interested. Thanks!

Selling some small dies. Some for mag pouches, some for leather coasters, some for small wallets. All are ready to cut. Pics will be uploaded.

Landis Belt Press that I bought in Canada directly from Landis factory and I refurbished it cosmetically. This machine is 110V electric and will punch all belt holes and tip of belt with ease. The current die is the original and comes with the sale but this machine needs a new die made. Everything works great, but again, the die needs replacing which you can have made by Campbell-Randall for $350-$400. Motor is very strong, has fresh paint and oiled well. This is a very rare machine and I have never found one like it. Used in my belt shop but need to make room in shop for bigger equipment. Foot pedal and hand operation methods (they are interlinked so operate as you choose. Asking $3800. Must pick up or YOU arrange for it to be picked up. I can crate to for you for $200. This is a rare and reliable piece of machinery for your leather shop. Don't let it pass you by. Questions? Please reply to post thanks! My zip code is 90731 which is where this machine is located.

Hello, I'm in the market for a 6" splitter, have been looking at a few Landis splitters but am open to other options. Does anyone here have one that they're looking to get rid of? I'm also looking for a good burnisher motor, and a clicker or hydraulic press. Thank you, Andrew

Hi Folks in NYC, I am selling my Weaver Mighty Wonder 4 Ton Hand Clicker (local pickup only). I purchased this beauty a little over a year ago and she is in great working order. i am moving over seas and would rather sell that put in to storage. Please hit me up if you are in the New York area and would like to come check her out.

I have a Weaver 4 Ton Mighty Wonder Clicker, used just a handful of times up for sale. I need something in the 10-12 ton range. I kept the clicker pad for my homemade clicker, but you can buy another from Weaver.com. Just about brand new. Local pick up or I can meet you in Phoenix. I will also be in Phoenix the 12th and 13th of December. $1350 firm.

Hey everyone, not sure if this is the appropriate place to post this. I recently dismantled and replaced the air bladder on a Tippmann Clicker 700. I thought I would share the video I made in the process, it shows the dismantle and components of the Tippmann Clicker 700 (incase there are other repairs, or someone is wondering how they work). Take care, Amol (not sure how to embed the video, but here is the link) https://youtu.be/JRSxlCVk0K0