All Activity

Regarding the control box if it's the same brand and the menus/settings are the same then there's a pretty good chance they will be interchangeable. The motor, being cast alloy, may have a broken bit of the housing inside?

Yep, they had to develop a magnetic stainless steel so saucepans could work on induction cooktops. Regarding the cheap tool if you file off the corner a little if it's chrome you'll go through it to plain steel, but I suspect it's probably ss.

Still playing around , this is rubber tubing contacted to the leather arrowhead . It has quite a bite on the thong , if the contact holds up this will be how I do them . I know slides are cheap but so am I

Something was nagging at me, finally figured it out - the geometric designs mixed with leaves don't seem right to me? Having said that, it really is very nice work and if given the chance that colour should age well. My first effort was boringly plain in comparison.

I have an inexpensive, generic servo motor that got damaged in transit. The seller credited it back and told me to keep it. Once the replacement gets here, I'll get it off the machine and take it apart. The motor works but rattles and thumps. The tighter the belt, the louder. I'm thinking a damaged front bearing (the damage was a very hard shot to the pulley area that drove it through the styrofoam and cardboard). Also, how interchangeable are the control boxes? The wiring and pinouts of every one I've had my hands on is the same. I'm thinking maybe a higher rated box, say 750 watts, might be ok running a 550 watt motor?

Recommend finding a store with a range where you can rent what you are considering buying. What feels good in the hand, may not feel as good when you actually fire it. Definitely recommend training. Once you have the firearm, training, and compliance with your state laws you can look for ways to carry. If it's not comfortable when you shoot, the inclination to practice decreases.

I bought a new gauge set for my Seiko LSW8BL. I can repair all my machines but, a bit intimidated by this project of changing a gauge to a wider one. Any video tutorial?

Thanks for that insight. Much appreciated

This is some great information! I already found that thread and read through it, but wasn't able to spot the differences myself. I wonder if it would be possible to source parts for the missing pieces, I'll have to look around for that. Thanks for the help! UPDATE on the machine, I seem to have been able to fix the thread from breaking. I will to try to explain, but to be honest I had outside help and have trouble grasping the situation myself. The clutch motor had a perilex plug (not sure why). I changed this to a standard 16 amp high current plug. I was unsure about what the effect would be on the machine but figured I'd have to make it work anyhow, since I don't have a perilex wall plug. I kept working with the machine this way, but realized that I should've checked way earlier if we attached the new groups the right way. Yesterday we switched two of the groups and voila, the machine was stichting! Now as you can see, while it is sticthing the lower thread tension is too low. So I went to adjust it. Interestingly the hook shuttle that is in my machine is also not the original (or the 27 subclass had a different one by design.) The original manual shows screw 47, that has to be loosened before screw 48 can be adjusted to increase or decrease tension. The manual: My shuttle: Everything seems to be going well thus far, sadly as I went to adjust the screw it broke 😔. Maybe I used to much force or it was just because of old age, but I had a small heart attack when it happened... So if anyone has any idea where to source replacement for that specific screw or just the shuttle, I would love to know!

Got the job done. If Eli's 82 everyone better take note and get those parts you always wanted... I've got a 16 and hardly ever use it, but I just bought it because I liked how it looked. Still find it unique. Sort of like that Farmall Super C all restored up in front of your local produce/greenhouse/farmers market type store.

Worker bee kit sold. Tandy big handwheel still available. $65 price includes shipped in continental US

Beautiful machine! There is just something about those big nickel plated flywheels that look so good. And keeping it inside the house will give the rest of the family a chance to hear the sound of you using it

Something else to consider is to not put so many "tacks" in that backtack. All you really need is one back stitch. One is enough, but 2 can be a plus. 2 as in 2 complete stitches back, not 2-3 piled up on top of each other. All that thread in one place just makes a globby mess and doesn't look so neat. If you're backtacking with heavy thread like yours, you shouldn't have more than 2 threads visible in each completed backtack stitch.

With the complication of belt and suspenders, I think your best option is pocket carry... if your pockets are big enough, such as with cargo pants. Recommended high-quality, extremely shootable, small revolvers. Expensive but worth it: S&W UC632 (.32), K6xs (.38+P), Kimber K6s (.357) Recommended high-quality, extremely shootable, small semi-autos: S&W Bodyguard 2.0 (.380), Sig P365 (9mm) Do not even think about any kind of belly band... hot as blazes in the summer. If you cannot do pocket carry, IWB or AIWB carry offers the greatest concealment but I don't know how that's gonna work with belt & suspenders. Perhaps a belt pouch would be your next best option. Maybe put an Apple or Nike logo on it for distraction. For that I would recommend the S&W Bodyguard 2.0 for its' slimness and small overall size. nick

I repeated the experiment, but this time I sprayed the strips with water to see if that would even out the unevenness, and skipped straight to 5min. This time, it was worse. Much worse. And the depth of color was nowhere near that of the first experiment. Conclusion: Don’t spray your leather with water first… Cheers, AZR

A couple of updates: I found a 2nd-hand handheld cordless compressor that seems to work really well and was missing the airbrush top end, but the thread on top of the compressor is some odd-ball thing that I can't find any adapters for or even information on what the thread size is (likely something proprietary), so I'm going to get crafty on the lathe and either make a fitting from scratch, or modify a couple to bridge it all together (pictures to come). I'm going to give it to my daughter to use and my intent is to make it work with the M5 Badger style hose connections, so it'll be portable, but less weight in the hand. She's mainly into drawing and painting right now. It would be cheaper and way easier to buy a complete working unit, but there is the sentiment factor that she can use one of her grandpa's old airbrush's. He had four of the Badger 150 clones and at least 3 work (I'm keeping his genuine Badger 150's with his leather tools). One or two of the clones are going to go to my nephew who's been getting into models lately. For his set-up I got a new 110v compressor as he's putting together a workbench/model station for his room. Then with the Binks Wren size "A" that I was trying to find a piece for, I got a good deal on a complete size "B" gun that looks like it's never been used. My current "B" works well, but between the two of them I'll use one for parts as they all use the same trigger/air flow pieces. The only parts that change between the sizes is the main body (stamped differently) and the fluid control assembly on the front. Now I just need to find a "C" size (heavy flow) and my flock of Wren's will be complete.

Thanks

You don't remove marks... you never make them. Thanks for sharing that video. Beautiful work. Very enlightening. I would agree that it is high-grade, thinnish leather, worked with great skill. Very impressive. However, I never understood why people desire this level of detail. Personally, I do not want to advertise the gun at all. I would be perfectly happy if no one could even tell it was a holster. But, that's a personal thing. In reality, my holsters do have a little detail, mostly in the trigger guard and ejection port, for retention. nick

Thanks, I had seen a couple like that. This one was like that because of a cutting disaster that I was able to sorta recover from. My intent was to have something like that.

Nice! My dad had a 16 when he was doing saddle and harness work and really liked it. Eli's a good man.

Excellent!

No I didn’t 😊

The guys that I have made them for like about an inch or so of the handles(scales) in the sheath for better retention. Most of these guys are "cowboys" of one form or another. The rest of their lives are a bit rough and tumble. This helps the knife to still be there when they need it. JM2C, Jim

absolutely gorgeous! fine detail!

Stunning! Very nice work!!