Constabulary

A picture of the part would help to ID. I don´t have all part # in mind. But I´d assume it is one of the pins the releases the tension disc. If it is a tiny pin that looks a bit like mushroom it sits in the tension assembly inside the post that holds the discs, spring and nut. If is is a longer pin it sits inside the machine and goes from back to front and pushes against the lever of the tension disc assembly when you lift the foot. If not - post a picture.

is solved, I already noticed it I have uploaded the larger file so the quality is much better.

Hey Gregg, I haven´t thought of it so I put it on a server on my end It is a 20MB file so download may take a few seconds but the manual is sharp + clear. Here is the direct download link: Instruction Manual Singer 29K58, 29K62 This manual of course will work for 29K71 and others as well, especially those with removable gear box.

I have a very nice and clear instruction manual for the 29K58 / 29K62 as a PDF and would like to share it but I cannot upload it as it is 2.5 MB. It also includes instructions for adjustments. Any chance that I can send it to an administrator who can add it to this post? It is really nice and clear and not a poor photocopy. I really think it is worth sharing it.

The Campbell is amazing! I also think one should wear ear plugs when working with it. Aircraft engines - yeeees - I like the sound of the engines they used with the P-51 Mustang, P-38 Lightning,C-47 Dakota, B-17, B-29... Finally I like everything that drove the Germans out of their trenches in WWII - but thats off topic. @ CD I used a 160 needle. Don´t know the exact thread size, it was an old spool of cotton thread with no label but I´d say it is a 207 or 138. Thread size is still something that confuses me a bit, I always have to look at my comparison table. The bobbin winder is the one that came with the machine - it´s a bit like the one you have on your Adler 205, right

Finally the Video is up - sorry about the quality I´m not a Video artist. Don´t know why it is so poor...

The system is obsolete and it is called vibrating shuttle or in German: Schwingschiffchen However it is working very well. Yeah, back in the old days these machines really had a heart and soul I´d say. Nowadays every freakin` machine comes from China and is light grey or white painted (most of them) and from the outside you cannot even tell from which factory they come. I like these vintage machines very much and as long as there is "rusted old cast iron" out there I could not imagine buying a "modern" machine - except a 441 clone - maybe . This has nothing to do with their quality but I just don´t like them. Well, it just looks dangerous but I think there are still some new made machines out there with exposed moving parts. The Campbell Lockstich

Took a bit longer I had to repair a truck tarp for a friend with this machine - worked quite well! Now here are some pictures The large hand wheel is extremely nice for hand cranking single stitches!

left toe zipper foot

The feeding in different direction is normal as you have a gear reduction (German "ADLER slang": Rädervorgelege) installed and this changes the direction. But you can change the rotation direction on your motor.

I have one for a 96-81 which is a bit different (reverse lever and different stitch length adjuster...) but better than having non I also have a parts list but file is too big to upload, if you want it send me a PM with your email address and I will send it asap. 96-81.pdf

I may have gears as I´m cannibalizing a Pfaff 142 atm I once bought as a spare machine and I think the gears are the same. I don´t want big $ for them. If interested let me know - if not - no problem.

I have to run - just a quick note... Because of the 211 - try a larger size needle or thinner thread. It could also be caused by the needle it self, LR point needles produce a slanted stitch. The bird nest could be caused when the hook is not catching the top thread and the bottom thread winds around the tab of the hook that goes in the gap in the needle plate. Is that problem? EDIT: The Pfaff could be slightly out of time and the needle bar has to be lowered a little bit. That would be my 1st guess w/o knowing how it is timed. Make sure the hook meets the needle scarf approx. 1.6mm above the needle eye when the needle bar is in the upward stroke. Also check if the needle is inserted correctly and the scarf is facing right (if you hook is on the right side).

It took a while but I´m finally done! I have mounted the machine on an old but restored cast iron ADLER stand with new plate and have added a nice Moretti clutch motor (great clutch motor BTW) Treadle stand is sold. I just have done some longer seams and I´m quite impressed of this old piece of old cast iron - I really like it! Just ran out of batteries for my camera so a couple of pictures and a small video will follow this weekend. So stay tuned if interested

BTW - this is a quite simple machine. I have never touched one before I got mine and I have stripped it down and reassembled it w/o problems. The only thing you really have to adjust is the hook timing but thats explained in most of the manuals you can download somewhere.

Don´t know where you are from but I had good experience with College Sewing in the UK. I bought all parts for the restoration of my 29K71 from them and all work fine and the prices are reasonable compared with Ebay. Especially the needle bar has a very good price. https://www.college-sewing.co.uk/Singer29K,29USewingMachineParts Most parts for the 29K71 will work for the 29K51 as well but you have to compare the parts numbers. this was my restoration project: http://leatherworker.net/forum/index.php?showtopic=56079#entry360060

Is it really so difficult to find used / vintage heavy leather machines for a reasonable price in the US? I come across about a hand full flat beds every month. cylinder beds are harder to find here. I should probably start to export some to the US and Australia. Seems there is a market

As I said, I don´t know the Davis machines but it does not look as heavy as a Singer 45K. They are not comparable I think. The Davis seems to have a walking foot BUT no feed dog this means the materials is feed by just a small foot. This will work for garment or thin leather but I doubt it will work for heavy leather. I also don´t know what needle sizes are available for this machine. If you don´t find needles in a proper size it makes no sense. I don´t know if Davis made heavy machines at all I still would not buy it for $350 and would not even pay $100. But thats just my opinion.

Is it for your CLAES patcher? try a roll bin instead, they are available ins dozens of sizes. I also ruined a pin at my 29K71 and replaced it with a roll pin and it works perfect. http://www.ebay.com/itm/M3-3MM-x-22-22MM-Roll-Spring-Pin-Metric-PK-10-/231295793444?pt=LH_DefaultDomain_0&hash=item35da4db924 But you may find them cheaper local at hardware store or so.

The leather washer I had on my 29K71 was about 1mm or 1.5mm but after I have finished my restoration I have not put it back on. I have attached instructions for 29K manual I hope this will help you to adjust your machine. Singer 29K Instructions.pdf

there are too many different machines out there to know all the specs. I think it "could" be possible that you find one that works. But remember, the post bed machines have a much higher positioned hand wheel so the position of your motor pulley is important because the angle of the V- belt is different. So you may change the position of the motor or extend the V-belt slot in the table. Like I said, I have two Singers and the only thing I have to change is th V-Belt. That works because the hand wheel position is almost the same.

Tables are not universals but a lot of flat bed machines have very similar bed dissensions. I`m using a Singer 111G156 and a Singer 307G2 on one table as both machines have the same size flat bed. This saves me a lot of space as the 307G2 is not my "main machine" but I use it for zig zag and lighter flat stuff. I just need a 2nd V-Belt which is permanently hanging on my speed reducer so I can switch between the machines in just a few seconds. But there are also longer flat beds for example some older Pfaff or Duerkopp have longer flat beds because the same machines housings were used for single and double needle machines. The modern motors have all the same mounting holes but older motors may have different holes. I know older motors with 4 mounting holes but most have just 3.

No - and no other sewing machine should do that either. The discs should only release when you lift the presser foot but not during the sewing process. otherwise you are loosing the top thread tension. So I´d say there is something wrong with your 31K. When your top thread is between the tension discs you should "feel" the difference when you pull your top thread when the foot is down and when your foot is lifted. When the foot is down the thread has more resistance / tension. Parts #9 is moving up and down all the time but only releases the tension when the foot is lifted.

VERY old - I guess form the late 1800 or early 1900. I don´t know the machine but it looks as if it is a vibrating shuttle machine which is an obsolete system (obsolete for decades). I´d only buy if you are a sewing machine collector. You may have trouble finding needles (depends on the needle system) bobbins, shuttles and other spare parts but main reason is that it is way to expensive and you can get much better machines with much better performance for $400. A used machines with walking foot / triple feed is what you should look for. This is just my evaluation from viewing the picture (same picture posted twice). Maybe you can post some more from the underside, front side and so on.

Or try DOT fasteners / Scovill http://snaps.dotfasteners.com/category/durable-8482--2