cashmanleather

When they say a lifetime guarantee at Leather Machine CO. they mean it anytime I've had a problem. They help immediately and send any Parts needed are sent that day . The other company I bought a machine from you send an email or leave a message and they'll get back to you in a few days maybe

You have to use as large a needle as needed without catching. You can also run it through some thread Lube. When you're all done take a flat shoe hammer or something with no marks on it and tap the stitches all the way around. It'll set everything and closeup the holes

They look like lock washers

My Bobbin winder, old sewingmachine motor and belt.

I took a set of blanket feet sanded smooth, and use them when i don't want any marks.

Here's a setup that would work. I believe it was at Panhandle Leather.

I have a Cobra 4 and I've had to shim the selector plate to get the needle to hit the same holes in reverse on mine.

I'd take it as just there option. Every one has one.

A rather large spool of thread to have on top. Probably not the greatest machine to learn repairs on.

If your sewing bottom to vamp I'd use walking foot. Glue it first. For sewing on vamp before sole a post machine is the way to go.

The 8810 works great but doesn't have reverse

Are you still looking for this tool Are you still looking for this tool

Panhandle Leather https://panhandleleather.com has piping if you don't want to make your own. They sell a lot of boot making supplies. Sailrite https://www.sailrite.com has a lot of Upholstery supplies that can cross over to leather work.

It was made by tandy I have a set.