SeppoKaitainen Report post Posted November 16, 2018 Does anyone have step-by-step pictures of how you knot your thread when threading a needle for hand stitching? I am having trouble with my knots slipping undone as I stitch and would love to not have to re-tie several times. Thanks! Quote Share this post Link to post Share on other sites
battlemunky Report post Posted November 17, 2018 Shouldn't be knotting for saddle stitching. Make it look like below and then pull the short end so it doubles up on the long end and repeat for the other needle. Not my pics, found 'em when I googled. Try this link too: https://www.instructables.com/id/how-to-thread-a-leather-needle/ Quote Share this post Link to post Share on other sites
ScoobyNewbie Report post Posted November 17, 2018 That is a wonderful picture. I don’t knot until I’m done. Just a tail at each needle. Quote Share this post Link to post Share on other sites
SeppoKaitainen Report post Posted November 17, 2018 That’s great, thank you. I had not seen piercing the needle into thread done twice. Have tried it with only a single pass and very good thread unravels quickly. Will give the second lock a shot. Quote Share this post Link to post Share on other sites
dikman Report post Posted November 18, 2018 Strange. I've always used a single pass and never had a problem with it "unravelling", even on long runs around a belt. Quote Share this post Link to post Share on other sites
battlemunky Report post Posted November 18, 2018 I was going to mention that too @dikman. I have used a double pass in the past but usually just do one because it works and it pulls out of the eye when I'm done far easier. Quote Share this post Link to post Share on other sites
chrisash Report post Posted November 18, 2018 Started using a single then gave up and just leave a tail now with no problem and if it does pierce the opposite thread unnoticed, very easy t pull through and clear Quote Share this post Link to post Share on other sites
bermudahwin Report post Posted November 18, 2018 @Seppo I had not seen piercing the needle into thread done twice That's how we were taught by the Saddlery lecturer at college in the 1980s, and I do it automatically now. Did not even consider other ways at all. Quote Share this post Link to post Share on other sites
Matt S Report post Posted November 18, 2018 Harness makers used to use a specific black sticky wax which was used only on the top few inches of thread, which would grab on very well, no piercing needed. This is in the context of hand rolled linen threads, which have beautiful long tapers on the ends. Once the needles were locked on the whole thread, including the bit with sticky wax, was rubbed heavily with a more slippery wax, like beeswax or coad. I tried this out a few times just for the experience but for the things I do (which don't include tugs or traces) it was overkill and far too laborious. Quote Share this post Link to post Share on other sites
ABR Report post Posted February 4, 2019 Get the book from Tandy Leather by Al Stohlman "The Art of Hand Sewing Leather" it gives detailed instructions on tapering the thread, waxing and threading the needles. Quote Share this post Link to post Share on other sites