Share your CAD files,STL's etc

[chrisash]

On 11/25/2020 at 10:42 PM, chrisash said:

40 mm Pulley Cura Profile for Taulman 230 Nylon 

 

Taulman 230 profile with slow speed and 0.2 nozzel.curaprofile 1.02 kB · 1 download

Ok I own up it did not last the short time, about 8 hours in it broke in two, but hey worth a try, might well be Cura settings need adjustment or different nylon

[GatoGordo]

Here is a corner radius card. It is similar to the ones offered by several vendors, except that it includes both outside and inside corners.

 

corner radius card.stl

[dikman]

Thanks mate, that looks very useful, better than trying to find various washers etc with the correct radius.

[sbrownn]

Here are two files, male and female, for the mold for the pocket of a Leatherman Wave belt sheath.  The  complete set requires three more files which I will post if anyone is interested.

The pocket mold set is designed to be used with up to 0.1" thickness leather.

 

Single Leatherman Male Mold.STLSingle Leatherman FeMale Mold.STL

[Sterlclan1]

On 1/11/2021 at 3:26 PM, sbrownn said:

Here are two files, male and female, for the mold for the pocket of a Leatherman Wave belt sheath.  The  complete set requires three more files which I will post if anyone is interested.

The pocket mold set is designed to be used with up to 0.1" thickness leather.

 

Single Leatherman Male Mold.STL 112.19 kB · 1 download Single Leatherman FeMale Mold.STL 130.75 kB · 1 download

would like them please

[sbrownn]

Okay, I'll dig them up and post them.

[sbrownn]

Here are all the files for the parts I use to make a Leatherman belt sheath.  

If you want complete instructions on how to use them let me know by email.

sbrownn1069@gmail.com

Single Leatherman Alignment Jig.STL Single Leatherman Belt Loop.STL Single Leatherman FeMale Mold.STL Single Leatherman Male Mold.STL Single Leatherman Tongue.STL Single Leatherman Trimmer.STL