All Activity

Just to leave this info here: I needed a bobbin case for my 840-100. Many claimed the same style and measurements, but the one that finally fit just right is called: Cutex Bobbin Case #173058 for Singer 206W, 306W, 319 Sewing Machines So #173058 is the winning number for smaller 335 machines (not the 335G with larger bobbin) It's also worth noting that the larger 335G bobbin hook set does install nicely to the 335 machines with no other parts changing. If you need to shop for the right bobbin case, it may make sense to replace the whole set and take the upgrade. There are plenty of inexpensive hook sets for both models. The higher end original Italian-made ones appear to be these: Large Bobbin for 335G model and clones: CERLIANI 130.00.335 Standard Bobbin for 335 model and clones: CERLIANI 130.03.017

I like how you used the stamps in an unconventional way. It really turned out quite nice.

Thanks Stetson912. I will heed your advice. Yes, the leather is a thin 6/7. The "blown out" holes were done with my old Tandy irons. The tines are not tapered, so it is not possible to make smaller holes. That's why I got new irons. Next purchase will be 7/8 or 8/9 leather. I think .8mm thread would be a good move as well.

I'm a firm believer of the saw blade option. If you're careful to not heat the cutting edge when you shape it, some saw blades have enough temper to hold a good edge without heat treating.

Just to leave this info here: I needed a bobbin case for my 840-100. Many claimed the same style and measurements, but the one that finally fit just right is called: Cutex Bobbin Case #173058 for Singer 206W, 306W, 319 Sewing Machines So #173058 is the winning number for smaller 335 machines (not the 335G with larger bobbin) It's also worth noting that the larger 335G bobbin hook set does install nicely to the 335 machines with no other parts changing. If you need to shop for the right bobbin case, it may make sense to replace the whole set and take the upgrade. There are plenty of inexpensive hook sets for both models. The higher end original Italian-made ones appear to be these: Large Bobbin for 335G model and clones: CERLIANI 130.00.335 Standard Bobbin for 335 model and clones: CERLIANI 130.03.017

This pulley looks super nice! And I love the low-speed video. Did you model the pulley and print it yourself? Have a model you can share? I'd like to print one for mine. - Sean

I've gotten orders online for knife sheaths and I don't have the knifes. There are a couple ways I go about it. One: I offer to make a general fit sheath. I'll get basic measurements of the knife then make a sheath that will fit the knife and there will probably be play in the sheath. You could use the sheath for different knives. Its like buying something off the rack in Large, Medium, or Small. Two: You can get the measurements from the knife manufacturer, it's usually right on their webpage. I print a copy of the picture of the knife in the measurements they provide, then I make a wooden knife like Dwight said. And the second way raises the price of the sheath.

Welcome from Israel. I had the same question as Deanr.

Natural veg tan treated with olive oil and waxed with paraffin from a tea light. Acrylic window. I need to clean up the end of the stitching

Nicely done. Particularly like the cutout for the sight.

Thanks guys, I'm curious if ya'll think the conchos should have been tucked a little closer to the bullet loops?

@Lena Carlton More information and a picture of the head Some dimensions of the base would be helpful.

Announcements is not the place to list your for sale items. It contains the Marketplace Rules which I assume you read. Moved your post to Businesses & Estate Sales since you are closing out your business. Looking forward to seeing your pictures.

When I handed the ATT to the crossing agent they just waived me through. Didn't even want to look at my rifles. I doubt it would be so easy today.

Moved your post to Dyes, Antiques, Stains, Glues, Waxes, Finishes and Conditioners. You should check this forum out. Lots of good info and experience here. Resolene seals the surface of the leather. So conditioners such as oils and greases don't penetrate the sealant.

I wish I had that option (and options to buy finishes and leather) but it’s one of the trade-offs for living here. Unfortunately there are few if any knives that Amazon will ship to Israel. On the plus side all of this encourages a person to get creative.

Are we allowed to know what your day job is, ? because those tubes look so handy and functional. I used to do a paper round in my little town some years ago, and I kept the empty cardboard tubes from the rolls of cling film that wrapped the papers, so strong and so handy . HS

That's what I call ' flying blind ' . For example: A customer asks me to make a leatherman type case, so I make a tracing , size, width etc of the item, and make template from the dimensions given *. I also get as much detail from the customer as possble. Same goes for sheaths etc. It's best to have the knife, leatherman , or item to make a custom leather case etc. *over the years, I now have quite a collection of templates for various applications. HS

Beautiful craftsmanship! Well done! Really like the addition of the conchos.

@nstarleather I just put up a wanted - do you have any 8-9 oz black veg tan - long enough for some belts I need to do ? Looking for affordable price.

Very pretty! I Iike the colors and the craftsmanship is first rate.

Hi all. I have an order for some black belts. 3 or 4 total. I need to buy some black, struck through, firm veg tan. 8-9 oz. Average length belts (48-50 minimum). Looking for a double shoulder or partial side. No embossed "hair hole" finish or protective coat. Been having trouble getting something at a good price from all the usual places (springfield, maverick, etc). Budget 65 total plus shipping about - b or c grade hides totally fine. Any body have something we can discuss? Thanks all. Black Latigo ok too. Same weight size etc.

That is one of the nicest for sure my friend!! It is excellent IMO, matches the revolver perfectly.

Maybe make pancakes for folders. a few sizes will fit most knives and dont need to be formed. Straight blade knife sheaths can also be made by making them for certain blade lengths and shapes. Knives usually have 3" 4" 6" blade length and certain blade shapes clip point and drop point come to mind and are most common. you can make a sheath easilly for any knife if you have the length, shape and thickness of the blade. Don't fret the handles they are all within certain parameters that have to fit the average human hand so most are very close in diameter and length. A decent picture is all you need and the blade measurments.

Hi All, if I use resolene over antique paste, can I use Aussie leather conditioner on the leather after the resolene has dried? thanks