immiketoo

Not sure I agree with you there, but kudos on your customer compliment! Always good to get positive feedback from a happy client.

Moved to leatherwork conversation since there are no pictures to show off, and we don't have a bragging section You provide quality for an affordable price, but I believe your holsters are priced appropriately. Simple, effective, and well made without any hype at all.

Sergey is much cheaper than Jim Linnell and he was the originator of that and many other stamps that are now being copied by others. I have many stamps by Sergey and they are quite nice. However, top level stamps are $$$ and usually you get what you pay for. Sergey is the exception and its because his production methods are cheaper with brass with a steel handle vs an all steel stamp.

Tan Kote is decent, but it doesn't seal like an acrylic finish. I don't like resolene either which is why I use RTC. Usually I will do RTC then tan kote on top of that. I'm not sure why you're set on using wax as your final finish. There are better and easier alternatives, unless you're trying for some sort of authenticity or archaic method of sealing.

Your homemade finish isn't a sealer. You're doing the right things by buffing and oiling, but re-applying wax and oil is activating the excess dyestuffs and smearing. An acrylic or lacquer finish will eliminate this.

Mind blowing

You bet

That's how I feel most of the time, but its good to inspire and to be inspired. I have people I used to think I'll never reach that level and now I know I can work at that level. What I find incredibly inspiring is helping folks improve to the point where I think I need to step it up again so I can keep up. I have a couple of people that I have been helping the last few years that have really come into their own.

You'll need lacing chisels, some lacing needles, lace, and a fid to start. Depending on the kind of lacing you want to do, you may need a lace beveler as more complex braids tend to get bulky without beveling your lace. I learned mexican round braid here: http://www.kingsmerecrafts.info/page100.html Single loop and double loop are also popular and I think that site also shows how to do them. Here are sone examples of round braiding. You can see the bulky edges of the lace in the second picture. This is why beveling lace is a good idea.

By all accounts, it was an awesome class. Its available on my website in the e-shop. www.learnleather.com.

ah, right. I figured it was just a relabeled Fiebings product or something.

Dry acrylic is essentially plastic and should have no harmful effects. I don't think this finish is acrylic, but without seeing the MSDS, I couldn't be sure. Acrylic paints and finishes don't have very strong odors.

Welcome! Always nice to have a fellow European in the forum!

Elom, Gary covered most of what you're struggling with and I will second the use of an awl over chisels. You can use them to mark your stitch holes but I've found I get more desirable results with an awl, especially on thicker items like holsters etc. Now, some people swear by stitching chisels and have VERY fine work to show for it, which brings me to the main point. Practice. You can succeed with either method as long as you eliminate the things that are going wrong, and the only way to do that is to assess where in your process that is failing you and make adjustments. As for your edges, on thin leather like wallet insides, I do not edge them. Ever. Its nearly impossible to do it consistently even if you have an ether that tiny. I will slick them, lightly or apply edge paint, but no edge beveling. One the thing. If your stitching is too close to the edge, you will also get waves as the thread thickness will distort the leather. Move your stitch line inboard a little or use thinner thread. Hope this helps.

Give me a shout if you have any questions.

If you choose that route, upholstery leather is the way to go. You can sew a circle of carved veg tan on top of that for a cool look.

Well, the Taylor stool is mine, and the problem you're having is the kind of stool you are starting with. I used a stool with a swivel seat and it has an internal core that I upholstered. You will need to create a physical stand off of the height you want, then add a 2 inch foam disc on top and then upholster appropriately. Otherwise, what you end up with is a short seat with no sides to work with. It can still look good but it wont look like mine.

I have different sized awls for different sized thread. The smaller the thread, the smaller your awl needs to be. I like Leder Louis awls. He makes several sizes, reasonably priced. Best awls Ive used too

Thanks everyone.

Hopefully soon, Bob. We shall see.

The problem is that the color is transparent and it allows the color of the leather to show. Its combining with the blue to create blue with brown in it, thus darkening it. The only real way to get that light color you want is to us nearly white leather or use acrylic paint. Some aniline dyes are more vibrant, but they're hard to get in the states due to the toxicity.

I am a huge proponent of trade shows, especially as they relate to leather work. You can meet some amazing people, see leatherwork that will blow your mind and of course, you can take classes. Taking a class from someone live is by far the best way to learn at a rapid pace, learn something you may never have picked up on your own and forge friendships along the way. This year, ELWATS has some seriously excellent instructors and I'd invite you to check out the list of classes. If you see something you're interested in, why not come to the show ant take a class. Some of these are filling quickly so if you want to come, start planning now. Here is a time-lapse of the class I'll be teaching. The class will cover facial features, tooling techniques and embossing with a hybrid plug. I'd love to see you there. http://leathercraftersjournal.com/store/product.cfm?product=1232 popeye.mp4

Not sure how I missed this thread, but thanks for the mention @Rockoboy! There are so many people that have inspired me over the years, its difficult to mention them all, but I find inspiration in unusual places. Some of my main mentors have been Bob Beard, Peter Main and Serge Volken, but early on, guys like TwinOaks, Katsass and JLS were inspiring. Heck, those guys are still inspiring if for different reasons than when I originally started. One thing I find continuous inspiration from is noobs who have the fire and the same insatiable thirst for knowledge that I have. Especially those who take what they learn and do something with it right away. It's good to see someone get it and move forward. So, to all of you, keep it up!

Nylon webbing of the sort used in upholstery would probably do the trick. Or any other synthetic material that doesn't stretch?

Those are for creating borders. They can be handy, but they can be a bitch to run. There are easier and more reliable ways to create borders, but if the price is right, go for it. You might like them!