danhux
-
Content Count
69 -
Joined
-
Last visited
-
Inkscape and Gimp are both great, lots of tutorials on the net for both. The issue with these apps is learning to work with layers and different file types.
-
I cut my corners using a washer as a guide, then make a mark for the stitches with a wing divider. Then use the wing divider set the same distance as your four prong chisel. Example, if your four prong chisel has the prongs 2 millimeters apart, set the divider to be 2 milli apart, mark the holes around the rounded corner. Then poke the holes with a stitching awl. A good wing divider set can replace about 3 different tools.
-
making a light box to trace patterns
danhux replied to Dragons Pearl's topic in Patterns and Templates
Keep it simple,,,pick up a cheap glass cutting board from a dime store, stick a electric window candle under it,,trace away.. I dye and cut on one of those cutting boards, they are tough enough to draw on, Dye wipe off with a little water, you can tape paper down while tracing. -
I really liked this template, thanks Tboyce for the template. I picked up some black leather at Tandy in Raleigh, NC on sale and made this bag for my wife. It turned out pretty nice. Thought I'd post a few pics of the finished bag.
-
I got the 1/4" set from HF, some of the letters aren't square to the punch which causes the letters to be cock-eyed when stamped. If you sign up for "Michaels's" coupons, they have a 50% off sale about every 2 weeks. You can pick-up leather alphabet stamps for 15 bucks if you use the coupon. The stamps are the same as Tandy and stamp very deep.
-
Hell, I should have done this to start with. Thanks "northount" Tom for the idea. http://instagram.com/p/xRxOoBs_wM/
-
I see the edge it makes on all kinds of leather products on "instagram", finally found a picture with tool in it, but the person only types in a Asian language. When I open the page in Chrome and translate the language, the name of the tool isn't there.
-
Can anyone tell me what this tool is called? I've looked around different online leather tool shops and can't seem to find it. It would be easier if I knew what it was officially called. I like the edge it produces, I just don't know what to call it. Beveler, creaser and "magic edge tool" don't seem to show this tool in any google search. Thanks in advance. Dan
-
Thanks so much. Very nice PDF file.
-
Just saying hi, beginner from Raleigh, NC. been a woodworker for years, enjoying learning to work with leather as a hobby. Started a few weeks ago.
-
Just saying hi, beginner from Raleigh, NC. been a woodworker for years, enjoying learning to work with leather as a hobby. Started a few weeks ago.
-
Great idea and great use of what's on hand.