Jump to content

Rolandranch

Members
 View Profile  See their activity

  • Posts

    489

  • Joined

  • Last visited

 Content Type 

Everything posted by Rolandranch

  1. Rolandranch
    Thank you for your comments and critique! I really appreciate it. The gap between the jockeys and the skirts was my biggest disappointment. I think I needed to block the skirts a little more and I also think I lost some of the form when I installed the plugs. You're right about the skirt edges. I didn't dye them because of the other thing you mentioned, the shearling needs to be trimmed more. My electric trimmer broke so I had to trim the shearling with scissors which didn't do as good of a job. When I dye edges with poorly trimmed shearling, it's too easy for the shearling to absorb the dye and looks messy. So I decided to hold off on dying the skirt edges until I get new trimmers. Good point about the horn. Looking back, I should have trimmed the horn a little closer to the stitching. It turned out a little bigger than I wanted. I cut several practice holes in scrap leather to see how small a hole I could cut and not have it tear. I followed Stohlman the best I could for the horn but I think I pulled the swells on and off a few too many times because it was my first go at swells. That probably made the hole stretch a little bigger. I owe you a couple cokes I did a big no no on the swells. I trimmed one welt too close an exposed a stitch or two. Thank goodness I didn't cut any stitches! I glued a shaving over my mistake burnished it and antiqued. It's still a mistake and it's still there but not as noticeable. Oh well, live and learn I guess. Thanks so much! Ryan
  2. Rolandranch
    Haha thanks Jeff!
  3. Rolandranch
  4. Rolandranch
    Hello all! Here is my first saddle build. It's a 13 inch youth saddle for my younger siblings. (I figured my first saddle should for kids who wouldn't mind all the mistakes.) It took me 20 days from start to finish on this rig. I used thoroughbred leather. It's far from perfect so if you have any critique I'd love to hear it! Thanks! Ryan
  5. Rolandranch
    I have repaired fenders both ways. The only time I glued and stitched a liner was because it was my own, the tear was much smaller, and I was trying to save a dime. It's still holding up fine but like I said, it was a much smaller tear. I would do what Randy said and build new ones that look similar. It'll look nicer and it'll be a lot safer for your client. You definitely don't want an accident to happen because of a poor repair job. The saddle maker I apprenticed under always told me to do the best quality work and not take shortcuts because others will look at your work and judge your ability based off of what they see. Before I got into leatherwork, I had a saddle repair guy fix my torn fender and he lined and stitched it. He charged me a fortune and the fender tore again within a week. You don't want to be that guy. Anyways that's my 2 cents. Take it for what it's worth. I've only repaired a bunch of saddles and helped make a few but haven't done one on my own yet.
  6. Rolandranch
    Wow very nice!
  7. Rolandranch
    I thought so. Clever!
  8. Rolandranch
    Thanks! I sold it for 800 but considering the time it took and material cost I'd have to charge more next time.
  9. Rolandranch
    Thank you so much! Thanks! I appreciate it Ferg!
  10. Rolandranch
    Is the flower center a modified backgrounder? Ryan
  11. Rolandranch
    Thank you! He says he's been riding hard with them and they hold up really well. That's good news. I kinda want to make a pair for myself now lol. The pockets sure come in handy since it makes it easy to get to your phone and you can't get to your pant pockets when wearing chaps
  12. Rolandranch
    Thanks! Lol after all that work I sure hope they get used a lot!
  13. Rolandranch
    Thanks for viewing! -Ryan
  14. Rolandranch
    Hi all! It's been a little while since I've posted. Here's the latest thing off the bench. This is also my first time free-handing sheridan-style carving. Let me know what you think. Comments/critique always welcome.
  15. Rolandranch
    You sure can but sometimes its really close so if you pick a side out yourself, get the largest one with the fewest holes.
  16. Rolandranch
    Thanks! It was the customer's idea lol
  17. Rolandranch
    Unfortunately, these wackos are my generation. That's why I like hanging around the older folks rather than my peers.
  18. Rolandranch
    Did a mobile app ever happen? Ryan
  19. Rolandranch
    Thank you! Sorry for the late reply. Hardware probably would have been better, but the lady wanted it this way. I glued and stitched the ends of the braids to the panel, then glued and stitched the shield cover over it. I did a practice piece and pulled on it as hard as I could and it wouldn't budge. So as long as she doesn't carry gold ingots in the bag I think it'll be alright.
  20. Rolandranch
    That's great that you enjoy leather work over video games. Most of my friends would rather play video games than making something. My family does not have a TV so everyone's usually busy making something. God certainly does provide. I'm very blessed to be able to do leather work! Congrats on graduating! I'm 17 so college is just around the corner. I'm probably going to get a degree in business and then go back to my many hobbies, including leather work, and be an entrepreneur.
  21. Rolandranch
    My servo motor went out a while back. Turned out the circuit board burned out, a common problem with servo motors. Replaced the board and running great.
  22. Rolandranch
    @Rohn Thank you, sir! @Ferg Yes, it's embossed. I see what you're saying about the background. This was the first time I've used that backgrounder so I wasn't sure what to expect. Also, the leather was still a bit wet when I took the pic so the background looks a little darker than it really is. Thank you! @heydox Thanks! That's a great tip! Like I said to Ferg, this was the first time I've used that backgrounder so I guess I wasn't paying much attention to the random part. Will definitely do this on the next one! @Danne Thanks!
  23. Rolandranch
    Hello! Here is a wallet I am working on. Still trying to improve at figure carving so any tips/advice is appreciated. Ryan
  24. Rolandranch
    Best head knife sheath I've seen yet!
  25. Rolandranch
    Incredible! How many hours did that take you?
×
×
  • Create New...