All Activity

Fred, we switch over next Sunday. I didn't realize you switched a week earlier. I sometimes suspect Halloween has something to do with the choice of date. If the switch happened before Halloween, it wouldn't be fully dark when the kids go out trick-or-treating. Although doing the rounds in daylight is safer, it destroys the ambiance of doing it in the dark!

Very neat setup. Lots of 3D printing (as usual with any project you do ) which gives you an advantage over the rest of us mere mortals when making custom fittings. The clear box is a good idea, I might pinch the idea for when I'm powdercoating small items - my cardboard box booth has fallen apart.

Nicely done

Super helpful guide 😊 I was trying to figure a method for my products at https://paeezleather.com

Translation

I used to drive new cars, we had two at the time. The dealership I choose gave good deals. The cars had to be serviced at the usual regular intervals. The chief mechanic was a young lady. She did a first class, and quick, job on my cars. Her diplomas lined the service reception walls. After the first time of her servicing my car thereafter I always asked for her to do my car. Many times I was in the servicing reception booking my car in and I heard others say very strongly they didn't want her touching their car One time as I was going in to book the dealer stopped me for a chat 'you can't have Kathy to do your car' 'Oh, why, has she left?' 'No, she's gone over to England, the importer is doing mechanics classes for the new range coming in next month' 'Why did you hire her anyway?' He knew I liked her and meant no harm with this 'She's a first class mechanic, top of her class, and we always hire the best' After the dealership closed down I lost track of her

Yes, that's good advice.

Bonjour,Je recherche une personne qui connait le moteur elka variostop type ce 552 No.09436652.Moteur 220/380. de machene a coudre quand je retire le pied de la petale le moteur continue je suis oblige de l arrete a l interupteur svp pourriez vous m aide merci

Its that time of year again . . . Tonite, 2am Sunday actually, we all put our clocks back to GMT We were on BST = British Summer Time, youse lot would call it Daylight Saving Time? Why do we still go through this needless exercise every year? The need arose in WW1 and again in WW2 (Double Summer Time) but with modern lighting et cetera its not needed As a farmer once said to me; the cows, the sheep and hens still need their feed at their time not by our clocks. Your dogs would be the same, mine was, didn't matter to him what the clock said he brought his food bowl over for filling

@Tove09Tilda I really hope everything goes really for you 🙏 A former flame of mine is a scientist, her office was adorned with degrees of all kinds in science , she spent many years at uni, she did do some science based jobs in labs etc, but they didn't last long, some of the jobs she ended up doing were food tasting demos in supermarkets , , when we first met, she worked at fast food takeaway joint, go figure ? HS

Forgive me if this sounds like a "what do you want to be when you grow up " question, but i wanted to be a farmer, that was until i went an open day at an agricultural college in my younger days , not far from where i live, a few farmers gave a demonstration on how lambs tails are removed, it made me feel ill 😢. Oh well, bang goes that idea. But in hindsight, I'm glad I didn't continue that idea as it's an incredibly tough and frustrating job and often with little and sometimes no return. Many assorted jobs later, out of the blue, I tried my hand at leather work, and enjoyed it, now 20 years later , I still do 😀 HS

Hi, for the color you showed above, the easiest way to get that saddle tan color is to carve the leather, but don't glue it up or sew it. Put a couple of coats of EVOO (extra virgin olive oil) on the holster and put in your dashboard in the sun. When it's dark enough, finish with Tan or Bag kote and then Resolene. Later

Hi I've HEARD of this being done, but haven't needed to try it yet. You can glue and / or sew a strip of leather, roughly the height of the sight, for the sight to ride up and down the holster when drawing and re-holstering. One strip on each side of the barrel. again, HEARD of it. it would be worth a try though, use scrap leather for the first try. Later

Olive Oil is what the Cowboy Action leather workers recommend. The leather will almost always turn grey when you dye it, let the leather dry all of the way before you put the olive oil on it. I use the following procedure for making black belts and probably holsters: 1. Tool the belt and let it dry fully, or at least draw the guide lines and tool the belt after dying. 2. Put the belt in the Black Tea Tannin Solution for 2 minutes. 3. Put the belt in the Vinegaroon for 6 minutes. 4. Put the belt in the Baking Soda solution until it quits bubbling. This shows that the vinegar has been neutralized. 6 minutes also works well. 5. Rinse with Cold water. 6. Let the belt dry flat, this takes at least 3 days. 7. Coat the front and back of the belt with Extra Virgin Olive Oil (from Extra Ugly Olives) or Neatsfoot Oil, and let dry. 8. Put on a second coat of EVOO and let dry. 9. Use a couple of coats of Tankote (shiny) or Bagkote (less shiny) on the fur side of the leather. 10. Use multiple coats of Gum Tragacanth on the flesh side of the leather, smooth it with a glass deal and let try. 11. To get Really Shiny finish on the fur side of the leather, use Gum Tragacanth on that side too. Let it get mostly dry and them buff it out. 12. Mix Resolene half and half with distilled water and put on several coats.

My thought was that it would help keep the veg tan a little more pliable. (I have NFO and saddle soap though) Usually I stiffen leather, and use 6-8oz instead of 3-4oz, so this is just the opposite end of the spectrum for me to learn. — AZR

Put a coat of 50/50 Resolene and water on that inside . . . then take a glass slicker while it is still wet . . . slick the fibers down real good . . . let it dry for about 1/2 hour . . . then apply another thin coat . . You'll be good to go May God bless, Dwight

What would be the purpose of the conditioner??? Resolene pretty much seals up the leather . . . I've never put on 4 or 5 coats . . . but I'd come close to betting that it would be water proof by then. May God bless, Dwight

I have never used Pro Resist . . . so I cannot tell you what will happen. All the purses I have ever done either get ONLY an oiled finish . . . or I give them a coat of Resolene . . . 50 / 50 diluted with water. I do that inside and out . . . unless there is some kind of liner inside. My buddy at Tandy said the rub off is probably from the antiquing . . . so you would have to cover the antiquing with either another coat of Pro Resist . . . or Resolene. I've never had any rub off after the Resolene treatment . . . and no dye separation when it gets wet. Find a piece of scrap . . . re-do it to match what your project has done on it . . . then mess with the Resolene or Pro Resist. That's what I would do. May God bless, Dwight

Aussie's is mainly petroleum jelly. It could make the flesh side sticky.

Neatsfoot oil before the vinegaroon gives a matte deep black color. It can be used after as well and sometimes turns grey vinegaroon dyed leather black. . If the leather goes grey, it is either because there is insufficient iron acetate or because more tannins are needed. This is what I do. In case of the former, add some more steel wool to the vinegaroon and keep aside a day or two and try again or make a fresh batch of vinegaroon. If the latter, dip in strong black tea for a few minutes and rinse well to get rid of all the loose tea and then try with vinegaroon. In all cases, I rinse the dyed leather well after the vinegaroon and then allow it to dry. The neatsfoot oil first, prevents it from going stiff. The water rinse removes extra vinegaroon which can leave a vinegary smell. The water also balances the pH. All my Vinegaroon dyed pieces are a deep black and not dry or stiff.

Vinegaroon made my leather super-stiff (almost unworkable) and gray also. I gave it a coat of mineral oil, because hey, worst case it’s still learning curve, but the oil caused the black to return, and softened it enough that I could use it. For period-correct, maybe NFO or olive oil? — AZR

If the flesh side isn’t sealed, can it be oiled/conditioned from there? — AZR

Having any issues with the interior? In the process of assembling a purse myself, but I made the dummy move of using water-based dye. I sealed the exterior with Pro Resist, but now I’m paranoid about bleed/stain on the inside (let’s say it got wet or something…). Before I stitch the panels together, is there anything I should do to seal the inside, or do I even need to worry about it? — AZR

In the woodworking world, they make a tool called a butt gauge, which you could come in from the side, probably 4 or 5 inches, and a small, custom-ground blade could be easily fitted in that cross beam, set to the depth, and cut away. That would be a simple tool to make.

Dwight, since you seem to know what you’re doing, I made the dummy move of using Fiebing’s regular dye instead of the pro dye for a purse, and I’m paranoid about rub off because of my mistake. Aside from a final coat of Pro Resist, is there something I can do to avoid the rub off? Also, because I went to the extra step of dying the interior/flesh side, what can I do to seal it? (Primarily concerned if it got wet…) — AZR