Jump to content

mlapaglia

Contributing Member
 View Profile  See their activity

  • Posts

    1,442

  • Joined

  • Last visited

 Content Type 

Everything posted by mlapaglia

  1. mlapaglia
    blackhead remover, does not look sharp like an edge beveler would be.
  2. mlapaglia
    What did you use for dye? Did you buff the heck out of the leather after the dye dried? You need to buff it with clean cloth till you get no more transfer. I would still sew it after you put the finish on.
  3. mlapaglia
    Place your awl with the wide part horizontal. That will give you a straight stitch
  4. mlapaglia
    After following what Bob said, I would get a new friend.
  5. mlapaglia
    Ya done good!
  6. mlapaglia
    Very nice, How does it feel when on and with Mags and the 1911?
  7. mlapaglia
    On your next version I would radius those bottom corners. Sharp corners wear very fast and get dog eared.
  8. mlapaglia
    My boss sews great, the back side looks very good. There is a learning curve on setting tension but once you master it you are good to go. I love mine. 415 thread which uses a 28-32 needle is as large as you can go. I use 277 with a 25 needle and love it. Michael
  9. mlapaglia
    Weldwood Contact Cement, Red label. One of the best you can use and its at your local hardware store. Thin coat on each side; Let dry till tacky then put together. I put pieces of wax paper between the two pieces until I get it lined up just right. THen slip out the pieces one at a time and press together as i go. Works great. Michael
  10. mlapaglia
    The leather looks nice. But Ill be honest. I do not like para-cord stitching. Personal preference, that's all. The work looks good.
  11. mlapaglia
    In a world where anyone can make a fake HO stamp. Are you even sure you get what you paid for just because it has the stamp?
  12. mlapaglia
    The second video where they compare the new clip to the old style is bogus. They take a BELT clip and wonder why it doesn't stay clipped to a pair of jeans with no belt. I am always suspicious of any company that stacks the deck in a comparison video.
  13. mlapaglia
    JME1979Member Since 05 Mar 2012 Offline Last Active Jun 05 2013 10:19 AM I doubt he will see this. Hasn't been on in 2 years.
  14. mlapaglia
    Will he buy a used Asian tool from us? Is that ok?
  15. mlapaglia
    If it is crayon try a brown paper bag and a warm iron. THe crayon will melt and flow in the the bag. It works on fabric. I have never tried it on leather.
  16. mlapaglia
    Nice Holster
  17. mlapaglia
    Sewing is a good way. How are you doing them? Surface mount, pulled up through a slot? A picture would really help. I use a Boss too.
  18. mlapaglia
    Always neutralize
  19. mlapaglia
    I use a 1 inch wide strip of 8-9 leather around the opening. The pics below show an example of how I do it. This is an early holster but the concept of the reinforced opening is the same on the current model. It keeps the holster open and does not collapse. Michael
  20. mlapaglia
    No it will not. As the vinegroon soaks into the leather it will cause the reaction under the resist. It might limit the reaction if you painted it on instead of dipping it but the edges would still look ragged. Michael
  21. mlapaglia
    Flat, hung, or rolled. You are right, folded is bad. I roll mine and store on a shelf. Been ok so far.
  22. mlapaglia
    Stolen from google, Harness/bridle -- basically the same vegetable tanned cowhide, but the bridle may have a different stuffing (oils and fats) than harness depending on the tanner. And there's the rub, or at least part of it: some terms are somewhat flexible in their use and not strictly standardized, at least in part because the recipes and techniques are often trade secrets. One tanner's harness might be another's bridle, just (generally) thicker.
  23. mlapaglia
    Thats twice what I use. It might be you are weakening the leather fibers with too much alkaline. I use 1 tablespoon in a quart which is 1/4 cup in a gallon. I would consider backing off on the soda and also look at bridle or harness leather. How are they caring for the suspenders and belts? Are they getting cleaned and oiled?
  24. mlapaglia
    How strong is your backing soda bath? How much soda to water?
  25. mlapaglia
    What is the maximum thickness leather it will cut?
×
×
  • Create New...