rktaylor

Really nice work. Randy

@SamalanI am not questioning your experience, but just wanted more details regarding 3M77. I am getting ready to glue some foam on a boat seat and just happened to have a couple cans on the shelf. The 3M77 is labeled for foam. Is it the type of foam that causes an issue? I can buy 3M90, but wanted more information on your experiences. Thanks, Randy

They still aren't. I called yesterday. RT

That looks really clean. Personally, I would have put the rivet burr on the other side, but it's visible either way. Randy

I heard Sunny recently moved into a rest home. I don't know if they'll reopen with a new owner, but that certainly leaves a hole in tree makers. Randy

Just found out they went out of business. Randy

I just called Quality Mfg. (435-587-5070) and got a "number no longer in service" message. Are they still in business? Do they have a new number? Thanks, Randy

Thanks all. The stirrups will be delivered later. Randy

Thanks for all the compliments. Regan, I hope your staying warm up north. I need to make the trip to Sheridan, but it won't be this year. Ron, I'm getting there, just a little slow sometimes. Still a lot of room for improvement. Take care, Randy

Thanks for all the compliments. I under estimated the time required for tooling by quite a bit. As with most good friendships, the luckiest is a matter of perspective. Randy

Finished this just in time. It'll be under the Christmas tree on Saturday. Timberline tree and chestnut HO leather. This is the most tooling I've ever done in a saddle, but it was for a good friend. I have so much left to learn, but I'm thankful for everyone willing to share their knowledge. Merry Christmas to all. Randy

Thanks

Here's the straps I made. It's pretty straightforward. There's probably other methods. Randy

Thanks Ron, The BW is a Barry King and the border is a Hackbarth Gomph. I need to quit pampering myself with items and get to work on this saddle. Randy

Thanks for all the compliments. Response to some specific questions are below. Sorry Dwight, I know the description is short. It is really a combination of methods Bruce Johnson describes here. https://leatherworker.net/forum/forum/17-stamping/. I have some photos, but need to write some steps to go with them. I haven't made that effort, because I am not sure if it would add anything to the previous posts. Maybe I'll get to that someday. As was pointed out, it just takes some patience and attention to detail. Plus, I have basket stamps a lot of projects. It is not lined. Its just 13/15 HO saddle skirting. I dyed the bar grounded areas with Cordovan brown and then used Sheridan tan antique on the entire piece. A couple coats of neatsfoot oil and some time in the sun. Dyeing and finishing is not a strength I possess. All is well here @Rbarleatherworks. I hope you are staying safe up north. Thanks to all for the discussion. Randy

The short answer is 2. The centerline down the bend is a straight line. I used that to set my angle (I wanted the stamp to be even along that line). I drew a reference line across the area to be tooled at the predetermined angle. Then I work both directions from that line. I try to stay focused on keeping the stamp relative to the centerline. Let me know if that helps. Otherwise, I can probably take some pictures to illustrate the process. It's nothing earth shattering and is used by a lot of people. Randy

Sometimes I just cover the project with a plastic bag with weights and leave it on my tooling rock. Other times I just wrap the entire project in a plastic bag like tsunkasapa. Randy

Thanks. I think I have about 3-4 hours in tooling. I finished the oak leaves and deer one evening, covered it up and did the basket weave the next day. I took a couple break during the basket weave, but it took about an hour and a half of tooling. It's oak leaves and white tail down here. It might be a little fancy for my Jeep. Randy

Thanks for the compliments. Randy

Thanks for the compliments. I obviously like basket weave too. I knew it was a lot of area so I used my largest stamp to save some time. Randy

I bought a new Henry 30-30 and thought it deserved a scabbard. I don't need it for a horse, but it'll come in handy for my Jeep. I used the Springfield Leather pattern. I'll make my own pattern for the next one. Comments and suggestions are welcome. Randy

Thanks for the comments. I've had the seat in the back of my mind as well. I'll try to post a picture when it's fit. Randy

I thought it would be nice to finish this thread. It's not perfect, but it'll do. Randy

Thanks for all the tips. I have been distracted from this task for a while, but hope to tackle it sometime this week. Randy

My plan was to sweat this cover on without a welt or lacing. It's a leg cut Olin Young, 12.5". The leather is from the belly near the shoulder and about 11/12 oz. I wrestled with it more than two hours and was making progress. However, I didn't think I could get all the wrinkles out. Any advice is appreciated. Randy