MADMAX22

Those look very good. Great job.

Douglas Tools 307-737-2222 Sheridan, Wyoming, Wyoming United States

If you go to the leatherworker.net home page he is under the directory there. Gotta call him as I dont think he has a website.

Thats an odd request but it looks great so far.

OK Ed I am probably going to get in a little over my head here as I am not that experienced. Say for example osbourne awl blades which besides tandy are the only ones I have bought. They come in several lengths from like 1.5" to around 3". The width of the awl (the hole size) is basically the same for all of them, maybe slightly larger for the longer ones. I think the size deals primarily with the length. Pretty much all of these cheaper blades I have gotten I had to file down to get to make smaller holes for smaller thread. the new tandy awls may be different as I have not gotten any of those yet and probably wont. I think my next set will be the guys I listed earilier. There was a sizing guide I saw here on the forum I think that showed how to determine the size you needed based on your finger length and to take into consideration the length of the leather as well. Basically when you hold the awl handle and extend your forfinger the blade should come out to the end of your forefinger. This would theoretically show how much awl blade length would be used during a standard puncture. This seems to be about correct for varying leather thickness but may need to be adjusted for really thick stuff say like a sheath that has 4 or 5 layers of 8oz along the welt region. Hope that helps.

From what I remember Taurus usually uses the same frame for several different models of revolvers. The specs list them at the same length but I didnt see any other specs that were listed to compare the two. Looks like some of the 85 series are hammerless which could play a part in holster design but other then that I imagine they are the same. That being said I dont have the two guns in front of me. Maybe try stopping by a gun store and checking out the two models to see how different they are.

Ahh ok cool, looks very nice. Good setup you guys came up with.

HAHA excellent work. That last one would make a killer looking biker helmet.

When you figure this out be sure to post it, I would be interested in seeing how it all comes together.

I like the first and second one. If you decide on the first one I would think about getting rid of the little snow spot in the center, seems out of place to me for some reason.

I asked the same question a while back http://leatherworker.net/forum/index.php?showtopic=19465 As far as the awls the length is the primary concern for how thick of leather you will be sewing and your hand size and such. Most of the awl blades you will get come in the standard diamond shape at various lengths and it is up to you to shape them to the proper width but be sure to keep that nice diamond shape. I cant remember who, Barry kind or Bob Douglas but one of them makes the most highly recommended awl blades and they come very sharp and nicely polished. They are pricier but apparently well worth it.

One thing I have also scene is velcro. This still requires the tank side to be glued down though and unless its in a very hidden place and the customer is fine with it I would be wary but they will hold pretty good.

Was wondering Joker, how did you do the color on that shovel head seat? Looks really cool.

Well still seems like a good hide for a C grade IMHO. Ofcourse I cant see the front. The portion toward the top should be alright as long as the thickness doesnt run out to much. Ofcourse maybe this is why its a C grade. Still some of the best stuff for holsters. Really like the firmness in the HO for holsters and belts.

Looks great, interesting design on the interior for holding the ques. Like the natural color also. One quick question is there a flap that goes between the two sets of holders? Dont know if its even necessary or not but just came to mind when looking at it.

Well after a year of being warn by a hard working shipyard mechanic I have some photos to show of how well this held up. I noticed right away that my first belt attempt was constructed with a few bad things, like stitching thru the center of the belt and not fully lining the belt where the buckle loop goes. Anyways it has stood up pretty well considering. Edges a little worse for wear, a few abrasions and such, was really surprised that the little tandy rivets held up as well as they did. Considering this belt has been thru hell and back I am pretty happy. She wants a new one to wear out and is gonna keep this one for work I think so Ill condition it and call it good. I know alot of times we dont get to see our work down the road (some of us do) and this isnt that old but like I said its been thru hell lol.

I have noticed with the HO that I have bought that most of the time the flesh side is that nice even slightly rough like what is in most of your pic. On occasion there are areas like what you describe. As long as the front of this area is ok I have used it pretty much like normal. It doesnt seem to affect the leather usage all that much. I would pretty much just use it on something that will be lined or where the flesh side is not visible. Also 99% of the time this is in the belly area from what I have scene so it really hasn't affected what I would use it for, just use it for whatever you normally use the belly portion for. I think it just has to do with when they skiv the sides down that portion is allready thinner then what they skived to so it doesnt get the same treatment as the rest of the hide. Pretty sure anyways.

Great stuff, like your style. I agree that celtic seat is different and interesting.

OK Ill try to add my experience. I have scene where they use those small camping butane fires and a metal can to melt everything but I didnt have one of those so I used the stove. It takes alot longer. I got the rosin that came in larger chunks I have heard the finer stuff is easier to work with. The rosin seems to have a higher melting point then the bees wax. I started off with the rosin and melted that first until it was all dissolved into a runny liquid. Then I added a little pure neats foot oil and my chunks of bees wax. The bees wax then melted in with the rosin. I stirred it up a bit and then poured it into some cool water as was mentioned before in a thread. I did a small amount at a time, about enough to make a golf ball size of it. I kind of needed it and pressed it into a nice round ball. I did this with the remainder of the stuff I had made. It mixed very well and made a pretty hard ball but it comes off onto the thread I use it for very nicely once warmed up. The thread gets very tacky and so do your fingers which is nice for pulling the needles thru to be honest. It would probably work pretty well for edges also but I have not tried it on such. I also used about 50 50 wax and rosin with about a table spoon of oil for a two cup amount. Hope this helps.

Get Tina to chime in here, I remember she had a Etsy site at-least for a little while. Dont think it could be any worse then ebay.

Very nice indeed, sounds like your gonna be very very busy for a few days.

Hey Steve I am not totally sure but I think that you need to type your text then upload the pics basically in whatever order you want. I always throw the pics in last after all my bsing lol. Give one of the mods a PM and they will know more about it then I do. Man your brother is one lucky dude to have you around to hook up his ride like that.