fredk

A granite slab is of use other than stamping/tooling on. You can hold your leather on it to skive the edges - when the skive blade hits the granite neither it nor the surface are damaged. You can hold your leather on it to burnish the grain or the flesh side.

Average ladies head is about 56cm to 57 cm around; add about 4cm for hat sweat band and material thickness = 60 to 61cm. If doing a buckle joint add at least 4cm to go thru the buckle = 64 to 65cm plus your fold over for the buckle itself, maybe another 4cm = 68 to 69 cm, so around 70cm

I think; divide up your tools into similar types, eg all the punches, all the sewing items, then make tool rolls for them. Make simple drawstring bags for the rivets and tuck them into a pocket in the tool roll https://www.leathercraftlibrary.com/product/1760/making-a-leather-tool-roll-by-george-hurst

Whilst many of us will do our own interpretations of many items I do not believe anyone on here, especially me, will actually make a full blown copy of an item produced by any company or individual

If the surface is sealed WD40 will remove the label sticky

There is no just right leather for anything. Thus to say 'you must use this leather for...' is wrong There is the best leather for a certain project and unsuitable leather for a certain project; it depends on that project. I've made knife sheaths [to order] out of soft 1.1mm upholstery leather, I've used 2mm, 4mm and even 6mm leather for knife sheaths, each to order, so to say 'you must only use 3.5mm leather for a knife sheath' is wrong If I'm asked by someone 'what leather should I use for this?' I'll advise according to the use of the item and what I want from the item and its finish

Did you prep your leather before dyeing? It sounds like specks of contamination like greasy dirt preventing the leather from accepting the dye. A wipe over with Fiebings Dye Prep, IPA, Methylated spirits or sometimes I use cellulose thinners to remove anything which might be unseen on the leather surface

I changed all my bulbs in my flat [apartment] to daylight LED bulbs. My power bill dropped to 35% roughly - not BY 35% but down TO 35%. I reckon the high power LED lights I use in my leather workroom are costing me about 12p [15c] per working day to run, old fashioned lights would cost 70p [85c]

Three of my son's car mechanics wear LED headlamps. Two mechanics wear them all day long, about 12 hours. They even leave them on over lunch break. The lamp units are expensive ones with a separate rechargeable battery pack. One battery pack is charging whilst the other is being worn. afaik the battery pack lasts almost a week before needing recharging I have a couple of cheapie ones out of a £1 shop [$ store]. These each take 3 AAA batteries. I don't use them a lot but at a guess I'd say they'd last about 2.5 working days, or about 20 hours work. [I'll do a test] I can buy alkaline AAA batteries 6 for £1. In my experience rechargeable batteries last only a few hours and need changing about every 6 hours. I just find it more convenient to have a few packs of fresh AAA batteries on hand, especially as I have other items which use the same batteries

I've been thinking of buying this one; https://www.ebay.co.uk/itm/DIY-Leather-Craft-Lacing-Sewing-Leather-Table-Hand-Stitch-Pony-Horse-Clamp-Tool/202436849658 My old one is a basic home made one; have to loosen a wingnut to move item, uprights fixed in one position - this one has a lever clamp and the uprights can be rotated

Most assuredly, especially if you took a tea/coffee break afterwards

Firstly; Le Prevo, Newcastle, UK does an an embossing plate service; http://www.leprevo.co.uk/embossing.htm The plates are done by photo etching and due to the nature of that process the edges of the image are not vertical as in the machined stamps but they widen out a bit as it gets near the backing Two of mine. Both machined in yellow brass by an ebay seller in China. These were actually done by two different sellers My makers mark. 3cm across by 1.8cm high One of the design stamps I had done. Stamp is 5cm across by 3.2cm high All the fine lines, eg in the grill, are nicely replicated

If only for a display piece; the only way I see of making that good is to cut away the ripped/broken bits and glue into the spaces freshly cut [& dyed[ sections of leather

That would come out ok with my stamp makers, but the landscape would be cut as deep as the sun and rays. To make it less deep I'd take a file over it and reduce it in height and maybe even leave file score marks in it for texture. At the price my maker charges I'd not fuss about doing it on a stamp from them

Won't help with your rounded edges but with the binary images like mine, simply make the background black and the image white. The machinest cuts away everything that is white

I got a stamp cut to my design by a seller in China. It cost £15 - about $16.50. Time from placing order till it dropped thru my letter box, about 10 days. Its cut in brass so it can be a. used as a hammer stamp b. heated in a pyrogravure for buning in I got my stamp made to 3cm x 2cm roughly. It has an M6 thread hole on the back so I can use a handle I've made up or under the ram of a press. Link to seller; https://www.ebay.co.uk/itm/Custom-Made-Design-Your-Logo-Leather-Seal-Wood-Stamp-Branding-Iron-Carving-Mold/382286790022?hash=item5902117d86:m:mxK2t0VgU1u9BQEIZjJLxxw I've had a few stamps made in China by different makers - they seem to go after a while. I've only ever got binary designs cut and they've managed to replicate the finest of lines

mmmm, Topic bar, I might have one with my coffee later I keep four windows open. One for 'Unread Content' and one for 'All Activity', Two for 'How do I do that' - one working from the 1st page and one working from the oldest posting to the newest. Thats about all I need, anymore I just use the search function. This site is really not as bad as another I'm on where there are over 23,000 members, a lot of whom post similar questions within days of each other, post in the wrong section . . . .

I'm not seeing an image

It looks like a longer version of a 'rabbiting* chisel' and he's using it in the way it should be used; to scrape away a thin layer of the surface *Rabbiting is the old name for 'rebate'. In wood work one used a rabbiting plane to shave down a groove in a piece of wood. The groove or shelf formed was to fit a panel flush. Look at the cross section of a picture frame; where the glass and back fit is the rebate. After using the rabbit plane one used a rabbiting chisel to go along the groove/shelf to even it up. If one did the rabbiting well the chisel only took off tiny scrapings. As the others have rightly pointed out he's removing some surface finish for adhesive, but it looks like he's actually skiving it a bit too

Dunno bout that. . . . . I believe there is a "special" area on this ere forum . . . . . . just sayin like

You asking me? You asking me!?! [in my best Robert de Niro impression] A beeswax mixture melts at around 65* The leather only needs to be slightly above that. I use a hair-dryer to warm the leather to just over hand-very-warm, my beeswax mix is soft and I apply it with a rag, then I play the hairdryer over it and the wax melts and flows into the leather. A couple of coats is enough, if you do more until the wax can no longer be seen disappearing into the leather, then when it cools you can buff that wax to a shine. If you add carnauba wax to a wax mix it will add hardness to the wax and thus stiffness to the leather item

Hot waxing will shrink the leather, from 10 to 25%. Warming the leather and applying heat softened beeswax is a different matter

Excellent

Two things which helped my cutting of thin leather; 1. Using a rotary knife 2. Cutting away from myself. I've always had a tendency to cut towards me, but cutting away on the thin leather seemed to reduced the drag effect 3. Using the rotary knife very, very, lightly. It just about kisses the leather. The sharper the blade the better that this light pass will cut ok, so thats three !

As Gary says get a 1 tooth punch, or a 2 tooth one. Also, if you can get a set of 3mm punches. Lets assume you are doing a simple item, sewing down one side round a curved corner, along the bottom, another corner and up the other side. With this I use my multi-tooth chisel to work from the top of the sides down to the corners, working alternately so there are the same number of stitches down each side. As I get close to the corners I use the single tooth punch to put a hole on the apex of the corner, then I see how the multi-tooth punch will make holes spacing back towards the side ones, I adjust the spacing using a 1-tooth or 2-tooth punch. Round the corners I use the multi-tooth from each corner towards the centre of the bottom, again working alternately so there are same number of stitches, as the two rows get close to the centre I check to see how the holes will fall. Then I use the 1-tooth or 2-tooth punches to adjust the spacing so any short or longer stitch falls about the centre of the bottom hth