BigBore

Very nice!

I see no clunkage. Looks great!

Outstanding workmanship!

Outstanding work!

Well done!

Thank you all! Much appreciated!

A few recent builds. The first is what I call the ‘Texas Sidekick’. I’ve posted this before, in different leather/color combinations. The belt slide stays with you all day, but the gun/holster can quickly and easily be removed while at camp or when you get to your hunting spot. Can be worn strong side or cross-draw. This particular one is for me. Made with Ostrich bonded and stitched to veg-tan. Revolver is a S&W 57 in .41 magnum. Second picture is of me wearing one cross-draw. The next two are my ‘bread and butter’ in terms of orders. Customized chest rigs for various handgun/optic combinations. Almost all my orders are from handgun hunters. Thanks for looking!

Stunning work!

Stunning work!

Very nice! ‘Sharp’ looking project!

Outstanding work!

Very sharp!

Outstanding work!

This is what I do. I have customers send me a detailed tracing; I then take it and glue to a piece of 1x6; cut it out; sand the edges; and bam...pattern. Works every time and very well. For me this is the best route anyway because 90% of what I build is for handgun hunters and the possibilities are endless between handgun/optic combinations.

Thank you. Yes, this is how the hide came. No top coat either. I tested a scrap with a top coat and didn’t like the way it looked.

Thanks everyone! And yessir, it’s one piece.

Thank you both. I just thought I kept my machine well oiled. Until yesterday I had only ever just oiled the drilled holes across the machine. After CowboyBob replied I took the side plate off and did it more thoroughly. Seems to have fixed the issue.

Working on a holster this weekend and the presser foot is getting stuck in the 'up' position. I can push on it and it will snap back down, or essentially raise it with the foot pedal and it will fall. Then it will work a little while and then do it again. I've also noticed when raising the presser foot with the pedal, it isn't a 'smooth' cycle, if that makes sense. I keep my machine well oiled, unless I'm missing a port somewhere. Anyone experience this before?

Very nice.

Thank you both very much!

Very nice work!

Outstanding work!

Creepy is right! Nice work!

Well done!

Thank you both!