Search the Community
Showing results for tags 'juki'.
Found 101 results
-
Hello! I recently bought an industrial Juki that came with this servo motor. I was under the impression that the dial in the front would adjust the speed, however nothing changes when I turn it. Does anyone have this motor? Is there a way to change the speed? Photos of the motor are attached. Thank you!
-
I am looking to get a good walking foot machine that is a true triple compound feed. So far the 1541 models are the ones that fit the bill and the Thor looks good at its price point but I am wanting to make sure I have long term quality. I would like to get a cylinder arm but financially it's not in the cards right now. I would prefer to stay in the 1500-1700 range if I have to in order to get a quality triple compound feed machine. I have been reading different posts and kind of using Wiz's tips as guidelines but with so many its just difficult when you can get the whole setup for a few hundred dollars less and it "seems" like the quality is the same but I was hoping for more insight from those who have had more experience with "knock-off" brands of the proven manufacturers. -
I just bought a new bobbin case and hook for juju 1508 cause mine tension spring was a messed up I was wondering about converting to a side load style like the 1541 that I read about. Does anyone no the machine that the parts come from to switch it Over and part numbers and also how do I sent bobbin tension correctly I have played around a lot and seen all the Videos of how it should be just loose enough to fall when not supported but mine is all the way loose and still to tight it seems. Is that tension I mentioned only for light fabrics. Cause like I said both mi e r tight enough to support the weight of bobbin with the screw backed all the way out. And how do I know when it’s right. Also I have been having to tighten my top tension almost all the way to even it out. Also is there any I stuctions to set up the take up spring cause I can’t find anything On that online or in the manual. Thanks
-
Hello, Leatherworkers! First off I would like to thank you for your sharing your extensive expertise. I read @Wizcrafts' sewing machine thread and have been lurking around this message board for weeks. I've definitely learned more about machine mechanics and specs here than anywhere. I really appreciate the breakdown explaining the various machine types, feeds, walking foot vs add-on foot, etc. I'm a professional seamstress with a market opportunity for alterations in Irish Dance dresses. Think Riverdance. Modern show/competition costumes are constructed with a particular double pleat skirt, with extensive stiffening materials (sometimes plastic or cardboard), on thick fabrics (duck, velvet, heavy satin, sequin, embroidered). This is to create the distinctive flat, sticking-out skirt. The skirt-to-bodice seam easily can be in excess of 1/2" thick. Example of a dress here: https://irishdancedresstoimpress.com/product/dress-11916/ My kids are Irish dancers and since I have done some alterations on their costumes, as well as some friends' costumes (mostly rescues from the damage done by local tailors), I now have many requests. But I can't get that blasted double-pleated skirt-to-bodice seam through my domestic sewing machine. Hence, researching industrial machines. My goodness. I had no idea there were so many possibilities. I asked my group of specialty Irish dance seamstresses what they recommend, but no one comes even close to this group's ability to break down the why's and wherefore's of my options. I'm pretty sure I've narrowed my search to a true walking foot machine with more than 1/2" clearance under the presser foot -- though some of the seamstresses say they are doing fine with high clearance on a regular double-toe foot. Juki was originally recommended to me by a trusted seamstress, but Wiz raves about his Consew machines so much, my horizons have expanded. :-D What I'm hoping for here is maybe to connect with someone with a used machine for sale, a dealer, or any and all advice & guidance the group might be able to offer. I think I will need to buy something used to get me through the upcoming fall seasons and then save up for an "ideal" machine. I know most of my particular craft doesn't apply to leatherworking, but the best mechanical information is here. Perhaps somebody is able to "interpret" my needs, or can point me to a different group that has a closer specialty (but can also explain the mechanical pros and cons). I'm located in Jacksonville, Florida. Thank you very much for reading my message and considering my questions.
-
My Juki LU 562 is not moving fabric through as it sews. I think it’s because the stitch length is set very short (I had a safety clutch trip, and whist fixing that, somehow this has happened). When I press the button to adjust the stitch length, the hand wheel is jammed and will not turn at all to change the stitch length, although it moves freely when that button is not pressed. Where should I start in trying to fix this?
-
Inner hook guide Trapped thread I am a fairly new owner of my juki 1510. I was chugging away sewing the other day when I heard a horrible sound and got an error message on my motor. I immediately switched off the machine and took out my work (thankfully just some prototype bits), I gently turned the hand wheel and noticed it would not do a full rotation. After opening the bobbin flap I saw there was a lot of thread wound up in it. I cleared most of it but there is still some trapped in the mechanism (pictured). I have followed a YouTube video trying to remove the bobin case so that I could clean it but am unable to remove the casing itself. I think what is preventing the wheel from doing a full rotation is the position of the inner hook guide (akso pictured)? I am unsure if it is sitting right or what I should do with it. If anyone familiar with the machine could give me some pointers it would be much appreciated!
-
Hey everyone, this is my first post on this wonderful forum but after much searching I haven't been able to find any posts that address this specific issue. I feel like I've tried so many things to fix the problem but its a bit of a mystery to me at this point so if anyone has advice I'd love to hear! For context I work mostly with soft upholstery type leather, with a small business doing custom jobs - bags, accessories, products with decorative appliqué and such. Working with a Juki model LU1510N-7 and Cansew Tex 70 bonded nylon thread. The needles are generally 135 x 15 R size 19 and are changed regularly. I have been having the problem of intermittent 'knots' appearing on the underside of the leather - these are made of the needle thread over-twisted around its self to form a tight ball of thread which when pulled and unravelled leaves a loop of several stitch lengths worth of thread on the underside of the leather. There is no fraying or catching of the thread as it goes along the thread path from cone to needle, and the bobbin thread seems to be running smoothly as well. I've tried different cone placements and thread paths as well to try to get the thread to feed as smoothly as possible off the cone. We have tried adjusting the tension depending on the material being sewn and even when the tension appears balanced between the needle and bobbin threads it doesn't eliminate the knotting altogether. Some days it seems like the machine will behave and sew perfectly and other times there will be 6-8 knots within a 10 inch line of stitching. Sometimes I will rethread the machine and wind another bobbin and it might go away for a while and other times that doesn't help at all. Also have tried with no real improvement: Needles from size 18-22, silicone thread lubricant, changing bobbin tension, different tension when winding bobbins, different heights for the thread cone. I have a suspicion that after switching from A&E brand thread to Cansew this was when the over twisting and knotting really became an issue - the quality between orders of thread varies and some colours of the cansew thread seem to be very stiff and tangle easily where others almost feel like a lighter weight even though they are both tex 70? Some colours in particular are bad for this, especially the darker ones. The knotting happens more frequently on some machines than others (they are the same model of Juki) which makes me think it isn't only a thread quality issue but something that is happening with the machine it's self. Here are a few pictures of the knotted thread before and after the knot is untwisted. Has anyone else run into this problem before? Hoping someone could shed a little light on the situation, at this point I don't know what else I can be doing to try to improve the stitching. -
Excellent condition. Very little use. Accessories included. Pick up in Murrieta, CA Phone# 9513170040.
-
I have recently bought a juki lu1510, my purpose is to sew thicker multi layer leather garments with it (such as a layered leather corset, mediaeval leather gambeson, maybe some experimental shoe making). It is the 6th sewing machine in my collection but first industrial machine and I'm having trouble understanding the thread specs (what each number means) and sourcing appropriate thread that matches my needles. I found the needles I needed from schmetz and got some nm130, 140 and 160. Could anyone help me find the thread I'm looking for? If anyone also has a supplier they recommend, I'm based in the UK. It may well be to do with the fact I only half know what I'm looking for, but I don't seem to find many stockists of heavier thread. Manufacturer specifications: Needles- 135×17 (at the time of delivery) (Nm160) Nm125~Nm180 Thread- #30~#5, B46~B138, Nm=60/3~20/3 -
Hey all, I've been in the search for a Juki 5410 and it seems not too much information is available out there online. Even more so true for the the older models! I quickly learned that this site has the most comprehensive information regarding different sewing machines and all you could know about them! After reaching out to many industrial dealers, I've also seen results discussed in the thread created earlier but have also had some good experiences with some folks. First and foremost, this machine would be for sewing lightweight 7d .5oz/yd nylons, polyesters, mesh, up to at most several layers of 8-10oz nylons/laminates. I would use from tex35-40 up to t70 bonded nylons. I know, not leather, but I come here because of the vast sewing machine knowledge. If I had all the means, I would search out a new Juki 5410n-7 (or 9010). I understand the newer (n) 5410 models come in different versions depedning on the weight of the material being used from light duty to heavy and jeans versions. I am specifically looking for the light duty version as I'm going to be using needles 9-18 with materials from 7d nylons and mesh to light weight backpack materials. The older versions seem to also be available so i have been looking at the 5410-6 as I prefer to have the auto features. My hesitation is that I can't find any information or instruction manuals regarding the older models and if they were offered in different weighted versions like the newer 5410 machines. I have an opportunity to purchase a 5410-6 within my budget but I'd like to confirm I'm getting the machine that suits what I'm looking for. Do the older 5410-6 Juki's have different variations like the newer ones? If this is so, how can I distinguish light from heavy on the older models without physically examining the parts? Something in the serial numbers? I also understand the different versions can be changed by swapping out just a few parts. Again, I'm not sure if this is also true regarding the older versions? Also can anyone give input as to the reliability of electronics in some of the older Juki industrial machines? Any insight would be greatly appreciated, Thanks
-
In a great condition, new servo motor, wonderful for leather work. Local pick up only ( Los Angeles) $800 or best offer.
-
I have a Consew 225 I’m willing to trade/part trade for the right deal. It comes with a servo motor, larger head unit pulley/smaller servo pulley for ultra slow speed. I just want something newer. I’m located in SW Washington.
-
Hi everyone! I am planning to buy a sewing machine for a small business that I will start preferably next year. The sewing machines that have been offered to me are the following: 1. Juki DU 141NH 2. Juki DU 1181N 3. Mitsubishi LY2-300 BOB The machine that I need must be able to handle medium to heavy materials (I’ll be using a combination of canvas fabric and leather), as I’ll be making bags (backpack, small pouches and totebags). Also, the machine must be user-friendly and if changes need to be done, the machine parts must be easy to source. Each of the machine is being offered to me at $650.00. So I really need guys your expertise and recommendations as I am very new to this thing so my money and first sewing machine will be worth it! Looking forward for your suggestions. Have a good day everyone! -
Hi, I am brand new to sewing machines, I purchased a new double needle post bed sewing machine recently (ZJ24028-2) and I’m having an issue with the handwheel being hard to turn at 1st and now it does not turned at all, I oiled the machine and still nothing the bobbin case is empty there’s no thread or anything in it, I’ve looked online to try figure it out but I’ve found nothing to help me figure out why it won’t turn... id really appreciate the help thank you.
-
I own Juki 1508s . GOLDSTAR GSM550 will not let me go lower than 1600 RPM. I have speed reducer installed. This model uses a needle positioner that I like. Question- need a new motor that allows RPM 500- 3500 but also has needle positioner that fits Juki AMCO shaft. ( see picture of needle positioner) Or how do I tell the servo to go slower from computer module...Any opinions?
-
Juki 1508H air powered machine for sale. I bought it from my mentor 7 years ago when I bought out his shop. Frankly, it intimidates me! ...I’m comfortable with my Cobra & that’s all I need. But I’m looking to upgrade to a Cobra Class 4. So this one has to go & then my Class 3 will go. This Juki will go as fast as you want (reason for intimidation)!!! I’m not a super fast stitcher. I prefer slow & steady! I would rather it be picked up as I’m not sure how to go about shipping something like this. Located in So IL. Additional pics available upon request. $2200 OBO Saw a new one online for $3595
-
Just saw this on eBay. Cheapest I have ever seen one here in uk. Need to be quick though. Less than a day to go and low buy it now price. Good luck. I’d buy myself, but I’ve already got one https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F263927001186
-
My JUKI came with a Goldstar GBSM 500 servo motor. I lost the instructions of what the buttons do. One is speed, one says allows you to switch between P1 and P2 ?? I thought that was part of the positioned mechanism but nothing changers when I use it, third but allows change from F1,F2,F3. I don’t know about this. help if you can
-
Hello, I’m having such an annoying problem with my “JACK JK-513A” servo engine. The engine is connected to my “JUKI DDL-8700”. So here’s the issue: The engine won’t go any faster than 02 in speed... Even though the speed is set to 20-30. Everything worked fine just the other day. Today when I started to sew, I received an "E5 error" — after I solved the error, it seems like the machine won't sew any faster than 02. Please check the following demonstration video by clicking the link: Demonstration video Does anyone have an idea, of what I can do? (Btw. thanks for letting me join the community)
-
Selling my trusty Juki 563, I have installed a servo motor last year. Its a great work horse. I've been using it for sewing leather and heavy duty canvas. Finally upgraded to a cylinder arm machine and need to make some space.. I am asking for $999 - local pick up only please, I can't even think of shipping this thing.
-
Selling a turn-key leather goods business (www.gifthighland.com) with over $2.2M in sales since 2012. Second kid, two companies and classic cars take precedence at this time. Wanted to store equipment with the hopes of starting up again in the future, but doesn't make sense at the moment with my growing family. Located in design district of Dallas, TX. Asking $95,000 includes everything below: Leather Equipment Fortuna 12' Band Knife Splitter w/ new blade Atom 20 ton Clicker Consew 206RB Sewing Machine Techsew 2700 Sewing Machine Brother Walking Foot Sewing Machine Cowboy CB4500 Cylinder Arm (all black model ) Cobra NP4 Skiver Cobra NP10 Double Feed Skiver Rossley Pneumatic Edge Folder Kwickprint Debossing Model 86 Kwickprint Debossing Model 64 (pneumatic setup, foot pedal activated, mounted on cast iron stand) Gluefast 20" Colonel Glue Up Machine RC50 Edge Painter Hand Press Rivet/Button Setter (x2) Heritage Foot Press Weaver Power Edge Sander/Slicker Misc Steel Clicker Dies (105 dies - wallets, key chains, mouse pads, coasters, portfolios, etc) Font Sets (x4) Company Logo Dies (200+...Nike, Adidas, JP Morgan, Gulfstream, etc) Speedtron 2403cx photography setup (all lights, controller unit and all cables in perfect working order) misc tools, needles, threads, heat stamping foils, cutting boards, snaps, buttons, etc Misc Shop Equipment Uline Plastic Bag Sealers (x2 - 12" and 8") 10'h x 8'w x 4'd Metal Warehouse Storage Racks (x8 Units) Small Metal Warehouse Racks (x3 units) Rolling Metal Storage Rack for shipping boxes Rolling Kitchen Rack w/ 12 trays Rolling Stainless Cart Air Compressor Quiet 5500LB Pallet Jack Packing Paper Roll Cutter 4'x8' Wooden Work Tables (x3) Misc plastic uline storage bins for tools, snaps, conchos, etc Customer List - I will provide historical sales data and all contact phone numbers, emails, company names, etc. (sample of customer list - MGM Properties, Gulfstream, New York Jets, JP Morgan, Montage Properties) Website & Product Photography - www.gifthighland.com , all hi-res product images (hundreds), latest product catalog in Ai format Leather and Misc Inventory- Approximately $5k worth of leather sides (Sepici, Horween, Hide House) and $20k of excess inventory from old orders including check book presenters, key chains, portfolios, tote bags, golf club head covers, briefcases, etc. I am including this inventory at no cost since some items have corporate branding. Consider it as free marketing materials. Manufacturing Partners- I will also introduce you to my manufacturing groups in Hong Kong and Los Angeles, perfect for large orders, custom products and anything you cannot make in-house.
-
I recently bought a used juki LS1341. Got it from a commercial shop and it was set up and sewing fine. Moved to a new state, new shop, set back up and it sews about two stitches and thread starts gathering up underneath. I have never had this problem on any of my machines before. Anyone have a suggestion?
-
Hi all, I am trying to install a zeromax speed reducer i bought onto a juki ddl8700 with servo motor for some fine tune sewing of curved in tight spaces on small objects of leather and other thich fabric. Could anyone help me in figuring out how it is to be mounted/installed? I can grasp the concept and verify the reducer device appears to be working properly, I am just a bit confused on where to mount, top or bottom, and how/if I need to move my current servo motor for the belts to correspond and unit to sew properly. Any advice or links would be greatly appreciated I am a technician and have no problems using my hands I am just not exactly a pro when it comes to sewing machines as I have only picked it up as a side hobby over the past 1-2 years. Thanks! James
-
I'm having a strange situation with the thread tension on a juki LU1508N. To get the stitch to "look" like the tension is right (no threads peeking through the opposite side), i have to have the top thread extremely tight and the bobbin extremely loose. I have about 10 of these machines and this is the only one with this issue. Its also skipping stitches intermittently... not sure if that is a related problem or not. Does anyone have any ideas how/why this is happening and how to fix it? Thanks!
-
Hey folks! I am having difficulty with getting a good bottom stitch for our leather products. I am finding that the top has a very even and good look with deep holes, but the bottom is coming out sort of rough and crappy looking. I don't think it's necessarily a tension issue, maybe the needle we are using? does anybody have a suggestion on how we can get this stitch look a bit more professional? Thanks!
