All Activity

Well done mate they look good. Just measured a rivet and they want a surprising 4mm. Will order some now.

This video has helped me considerably I have the same exact machine that I am restoring still deciding on a color I love the color that was used in the bottom picture...

What a beautiful machine, I managed to get one of these American St Louis leather splitter. I purchased it in lot with a shoe stretcher and a couple of other cobbler items for a very reasonable price. I plan on selling the shoe stretcher for it needs work. The weather splitter I will keep I already have it on the restoration. it was really in need of my restoration When I received it.

Put the screw for the eccentric, marked S on the eccentric into the slot (or V on the shaft)once you get it pushed to the left where it belongs & tighten the screw should get it feeding again.

I actually removed the set screws that hold the spring in place, and it was a bit of a pain to get that put back together (had to compress the spring with wires). But, I don't think that has anything to do with the issue. The "eccentric" piece slides freely in either direction, so I can slide it back into place. But, when the rod turns (for example, when I turn the wheel by hand), the rod does not "grab" (or engage?) the "feed eccentric" piece at all, so it is not even possible to rotate it into position for the stitch-length button to be pressed.

@Judo I would be interested in the Google doc, spreadsheet, pdf or whatever. Also, what subreddits did you post on? James

That is awesome! Love the carving! I can't even imagine myself trying to sew that. Lol

Nice work! Good comeback

I found those on Temu similar to ( https://www.temu.com/ca/1pc-stainless-steel-tube-length-500mm-304-stainless-tube-capillary-tube-4mm-5mm-6mm-8mm-10mm-12mm-g-601099551644232.html?_oak_name_id=9010104525789703535&_oak_mp_inf=EMi0gKqm1ogBGiBhOTk2N2RhZTNiM2I0OGEzYWIwN2I0YTA3MDFlZWYwOCDCu5j%2BkDM%3D&top_gallery_url=https%3A%2F%2Fimg.kwcdn.com%2Fproduct%2Fopen%2F2024-03-11%2F1710136714348-0dee0bda551a4502a37d030446db1c83-goods.jpeg&spec_gallery_id=601099551644232&refer_page_sn=10009&refer_source=0&freesia_scene=2&_oak_freesia_scene=2&_oak_rec_ext_1=Mzgx&_oak_gallery_order=2123497396%2C1416546653%2C1556706142%2C2030261482%2C639126929&search_key=stainless steel capillary tubing&refer_page_el_sn=200049&_x_vst_scene=adg&_x_ads_sub_channel=shopping&_x_ns_prz_type=-1&_x_ns_sku_id=17592387188379&_x_ns_gid=601099558219698&_x_ads_channel=google&_x_gmc_account=695390730&_x_login_type=Google&_x_ads_account=6910707695&_x_ads_set=21445371984&_x_ads_id=163985514426&_x_ads_creative_id=705187068636&_x_ns_source=g&_x_ns_gclid=EAIaIQobChMIh8-XxtqJiAMVckp_AB0yLi9TEAQYBiABEgKM5PD_BwE&_x_ns_placement=&_x_ns_match_type=&_x_ns_ad_position=&_x_ns_product_id=17592387188379&_x_ns_target=&_x_ns_devicemodel=&_x_ns_wbraid=Cj8KCQjwoJa2BhC-ARIuAK-YPyAPBRiMisytKWY4gCe42YwLmzWGnnz3z3Cv-X8BXZO0JO9OMpk78c8fmBoC3BY&_x_ns_gbraid=0AAAAAo4mICGOP3XszhHdJ9mfoJkEYI7ia&_x_ns_targetid=pla-2322529874778&_x_sessn_id=m1vl5lgo1t&refer_page_name=search_result&refer_page_id=10009_1756906266410_lxtn1pj9ik ) kgg

@Ferreol Helle Clément, and welcome to the forum I think the biggest challenge will be finding a machine and a needle that will accept a 3 mm thread. I have an old Singer class 7, but I don't even think that that machine is able to manage a 3 mm thread. A problem is that the bobbin won't really be able to accommodate much, and I doubt that such a heavy thread will be able to go around the bobbin itself without getting stuck. I just checked Gross Beckerts needle sizes for system 794 (the one that a Singer class 7 and others use), and they did have a needle called size 300, but it was incredibly expensive - around 20 times the price of a regular large size e.g. size 200. They wanted something like 420 $ for a 10-pack of needles. My best suggestion would be to use a thinner thread (linen or cotton) and sew through the 3 or 4 mm diameter linen and through the wool fabric. This might not be what you are looking for, but it would enable you to fasten a 3 or 4 mm thread to your project. Wool fabric of that wight, I think that you should technically be able to sew on a regular machine. But not with such a heavy thread. As an alternative to linen, perhaps you could use silk? I think it is available in qualities that you can use on a sewing machine. Best regards Jonas

I think the part # for the table plate is 202259, and the hook end on the machine is #210844. Same hinges are used on the 107W zig-zag machines. Googling those numbers pulls up a number of sources, and I think you can still get them from Superior.

Thanks! This one was with my own pattern. I've made a hat before with a pattern from Dieselpunk but the hat didn't fit right so I redesigned it. His cowboy hat pattern is to round so presses one the front and back but leaves a gap on the sides.

More like it mate. I'll do a search.

My little bbq . It's not very big, but it works just fine, and big enough for me and dad. I got a 2 ring gas burner for my wood fired brazier so I can at least have a barby, while my ol' bunky is being restored. HS

Maybe some stainless steel capillary tubing as it comes in some real same sizes??? kgg

No, this is just a twin needle machine with a jump foot. But it's going to be a treat not having it flop around on my narrow table.

Just a simple rivet size tube needed Keith. Where my dies have a wood core it would be simple to just drill a hole and glue a tube in to save working out where to punch every time.

Hi, anyone know where you can source a bias binding foot for a Seiko lsw-8bl sewing machine in the uk? Do they even make one? material is 600d cordura binding on 500d cordura material thanks in advance

those look really nice! Glad you have the time to get back into leatherworking.

My something like this may work. If so check out places like Temu. kgg

Older post but damn. That’s nice. Did you wing it or did you try out a pattern?

Really great work so far mate and I know this was a request but I ain't having it until I see a handbag. If anyone knows where I can get tiny hollow tube that I can incorporate into my dies to punch rivet/snap type holes at the same time please let us all know cos it won't be long before dikman wants em too.

I need to store the deerskins that I have, as I try to determine how exactly to choose the additional deerskins I need for my next project, as no one here seems to know the exact answer to my question, asked in another thread. As I wait, I found a way to store the deerskins, that has not damaged the deerskins as yet. So I thought I would share it here for newbies in the field like me. Others might be using the same method as well, of course.. I need this way because I do not have space to hang them all up. I store my deerskins in large zip-lock bags, the ones I received clothes in, actually. I leave sufficient air inside to provide a buffer against the weight of leather placed on top and then zip it tight. The air inside prevents damage and give it air, as it were. Of course, I have not kept them in this way for long periods as of yet, but for short periods, it works. Deerskin is notorious for getting wrinkled, so this is an easy way to prevent that. You get similar large zip lock bags online as well. Come to think of it, other leathers that might crease could be stored in a similar way as well. Hope that information helps somebody.

Well, further time on the internet indicates that Blue Mountain Industries thread was a product of Barbour threads (the US company) that apparently went out of business 20+ years ago. Would still like to know if this thread is any good. Any insight appreciated.

Are those things hardened? If not once the the rust is gone heat it to blue-gray and drop in oil, that gives a nice finish and some rust protection.