Northmount

Hi @VeeBee. Moved your post to leather sewing machines. You'll get more answers here. Tom

A capacitor start motor should have better starting torque. Check what you have versus capacitor start. Tom

@Blackbird @Rohn Blackbird hasn't been on this site since March. So it looks like he may not be interested in following up on his posting. If there is no response from him, remind me in a couple days to move this to "old and sold" and to lock this thread. Tom

Great information! Which type of contact cement are you using? Tom

It always takes on a slope as continue the lacing. I always take out the first few stitches when I connect back up. The circle accentuates the slope. You could use the same hole 5 holes or so, or just accept it and take out several of the beginning stitches until the slope matches up. Tom

@Joelle Moved to leather sewing machines. Tom

@Zsuzsu Moved to leather sewing machines. You are more likely to get answers and help here. Tom

@Glaciersew Moved to Leather Sewing Machines. You'll get more answers here. Tom

Still waiting for photos. Tom

Love the change purse design. Tom

You might try Longview Leather. They are about 3/4 hour south of Calgary, AB. http://www.longviewleather.com/ They have a 12" wide band knife. Tom

Have you read this http://leatherworker.net/forum/forum/50-leather-sewing-machines/ or this http://leatherworker.net/forum/topic/25239-the-type-of-sewing-machine-you-need-to-sew-leather/ Tom

Really fantastic work. Inspiring to us all. I've only done a small amount of figure carving. Will take me centuries to get to your level of accomplishment. Tom

This question is asked over and over here. Resize the photo. Some phones will let you do it just by selecting the size before taking the photo, others will let you do it during an upload, others will have to run a resizer app to do it. Look at this forum http://leatherworker.net/forum/forum/33-computer-help/ Tom

If you start marking out your stitching at both ends of a straight run, you will likely need to adjust the distance between stitches near the middle so it looks like they are evenly placed instead of having a very short stitch or long gap. It also works if you mark from one end, you can adjust the spacing at the opposite end to make the stitch lengths fit nicely. Looks like you just lay the template over your stitch line to mark the remaining stitches. Tom

If you hover over the username or avatar, you will see the option to hide the user's posts. I assume that on a phone, you would tap the username or avatar to pull up the same choice. Edit: @RusticLeatherShop has been warned and placed under moderator review. All his posts will require moderator review and approval. Tom

If you resize photos to 800 x 600 or even 1024 x 768 pixels, there will be no problems uploading as many photos as you want to in a post. If you do a little checking of what size your photos are before hand, and what you can or need to do to make them fit, all should go smoothly. An old saying, "An ounce of preparation is worth a pound of cure" certainly applies here. Photos sized above are more than adequate for most things you want to post. Also reduces upload and download time for those people who live on the fringes of the internet or have otherwise limited internet speed and service. Still lots of places in the world with slow access. Tom

If you include site:leatherworker.net in the search string, then it is forced to this site only. Google really irritates me when it ignores words that I really want in the search string, so I think it could drop your "+leatherworker.net" parameter as well if it is not finding enough instances. Tom

@rfkoen You have responses that you should be responding to if you are really serious about helping sell these clickers. When you make a post like this you should be checking back at least once a day. I see you haven't been back here since Sep 15. Tom

@RonJr When the thread is laying on the top, there is too much top tension, or vice versa, too little bottom tension. But first make sure that the machine is threaded properly, especially where it breaks the thread. Are you holding the thread tails when you start sewing a seam? If not, you need to as it can result in a birds nest on the bottom side and result in breaking the thread, jamming the needle, and even bending or breaking the needle. The tension would also be lost for the first several stitches. Tom

Leave it alone for 2 or 3 days to allow the oil to fully disperse through the leather. Areas that have been tooled soak up a lot more oil just due to the rougher surface that collects more oil than a smooth surface. In the future, oiling from the back side may help avoid this problem. Always go easy on the amount of oil you use. Hard to remove it if too much is used and it gets soggy! Nice job! Tom

Note also that these are two different wallets. The first one has the pouch zipper facing into the fold. The second has the pouch zipper facing out. The second one is similar to an accordion purse/wallet. I quite like the second one even though it is more complicated to put together, especially the accordion gussets. Tom Edit: Here is a file that may help. I don't recall where it came from so I can't give credit for it.Long Wallet Templates.pdf

When using a light dimmer (triac) or rheostat to control the speed of an induction motor, the motor will tend to run hot. And the slower it runs, the lower the cooling air flow through it, and it runs even hotter. The motor wants to run at a little lower than synchronous speed (for a 2 pole motor on 60 Hz, that is 3600 RPM, typical running speed would be about 3450 RPM under normal voltage and load). If not supplied with adequate voltage (and current), it can't build up normal speed, therefore can't build up the normal back EMF and will draw higher current, run less efficiently, and run hotter. Without adequate cooling air flow, it then runs even hotter. So could run at moderate speeds with a light load. If it is getting too hot, increase the speed or reduce the load. If you let the smoke out, you will have to replace the motor. Fan speed controllers (triac) will last longer than light dimmers on an induction motor. Always pay attention to the electrical ratings of the triac and the motor. Tom

I never said that white wood glue (PVA) doesn't work. If you re-read, I said it is not a contact cement. Depends on how you want to glue things together. If you have an item that is difficult to clamp until the glue is set, then contact cement is best suited as it grabs on contact. I have used both, and still use both, but with different expectations and requirements. I also use superglue on occasion and leather tape too. Choice depends on what you are making and how it has to be assembled. I made the assumption the shoe glue he is referring to is likely a type of contact cement, whether that is accurate or not. Tom

Lisa Sorrell does a lot of skiving when making her custom boots. She has skiving knives for sale here https://sorrellnotionsandfindings.com/?s=skiving&post_type=product She also has a couple videos on her youtube channel Tom