veedub3

I have one and had I kept the receipt I surely would have returned it. I know use this version shown in the photo. I got an off name brand from Ebay, but I think the maker is Tru-Cut. Karina

I cut myself very badly for the first time two weeks ago. Bandaids wouldn't have stood a chance against this cut. I put a new blade in a rotary cutter, lined up the steel ruler, and the next thing I know, blood is "EVERYWHERE"!! Took a slice out of my pointer finger like I was grating cheese or something. Could not get it to stop bleeding, had to call 911 and the Fire Dept which is across the street responded and got it under control. Had to take a trip to the ER and it took 26 stitches to close the wound. I have only been in this for nearly 4 years and until then had only really had a few sticks from the needle and awl but nothing near as this bad. Seriously scared the shet out of me! Haven't touched the rotary cutter since. I went back to using my curved knife. Until this happened my biggest issue was to figure out how to stop whacking my thumb with the maul when using the oval punches. Geez I hate it when that happens because that really hurts. Karina

I have several lying around, three 45mm (The one from Tandy, one Olfa, and one Fiskars), one 60mm Olfa, and one 45mm Fiskars that I put a pinking blade in for when I cut waxed canvas to keep it from fraying. With only one, I always found myself looking for it and could never find it when I needed it, so over the years I have accumulated quite a few. Much like the many pairs of scissors that I have. It also helps that I always buy them with a 40%, 50%, or even 60% off coupon at Joann's. They are pretty much the same IMO, I really don't see a difference in how they handle regardless of the design. The key is to have a sharp blade. When you have a new or sharp blade the rotary cutter will cut like butter. Speaking of cutting like butter: I placed a new 45mm blade in my Fiskars last Wednesday and proceeded to cut a slice out of my pointing finder from my knuckle to the bottom of my fingernail. Took 26 stitches to close the wound. I was done for the rest of the week needless to say after that mishap. I use a metal ruler and for the life of me can't even understand how it happened, I really only remember the sounds that came out of my mouth, so make sure you are extra careful. Karina

Amazing! Enjoyed watching the video. Great work! Karina

This is what I have been using for a few years now. I have both the fine tip and the fat tip, but what you showed it practically does the same thing. Pour the dye in, then start edging. I get mine from where I purchase my Angelus dyes (Turtlefeathers.net), but I think Dharma Trading carries them too. Karina

Thanks for your input on the thread. I was told that the Royalwood thread is Waxed Irish Linen thread, so that may have something to do with it being a lot smoother, as opposed to the waxed poly cord that Maine Thread sells. I use Maine thread a lot too, and have been procrastinating for several years on getting some thread from RoyalWood but never pulled the trigger. I did get some Tiger thread in on Thursday, but I haven't tried it. Just looking for a good thread that's easy to come by and won't break the bank. Karina

Very Nice! I have been thinking about ordering some some thread from RoyalWood, How is it compared to Maine thread? Karina

Type in "lignum vitae" in the search box up at the top tight corner and you will get a couple threads with members talking about this wood. Karina

Go to YouTube and search for Embroidery stitches by hand and you will get plenty of tutorials that will show you how it's done. Karina

Have you checked out Youtube? They have several videos on how to draw a straight line and how to draw curves in Illustrator, and many, many more helpful videos on Illustrator. Sorry I can't help ya, my software of choice is CorelDraw. Karina

Your images did not show up. Karina

Biglew you are absolutely correct, and I forgot all about it. I actually didn't use the pattern provided as it is so simple to make, I made a small handbag version. FirstNick, here is the thread where the pattern is found: http://leatherworker.net/forum/index.php?showtopic=59684&hl=%2Bwood+%2Bgusset+%2Bbag Karina

Do you mind posting a photo so we can see the finished product? I picked up this pattern dirt cheap years ago and one day I would like to make a pair.. Karina

I tried it out and I used brass tacks. Here is a video of one being made. Karina

Very Nice, Dad should love it! Karina

I tried this in Feb 13' right after a member posted photos showing his work, for a notebook for my niece. I successfully used archival ink from Hobby lobby and regular Fiebings oil dye on vegtan. (I have not done this on pre-dyed leather) It was very colorful as I used at least 6 different colors and they all showed up well on the vegtan except the yellow was a tad muted. This was over two years ago and the last time I saw the notebook it looked even better because the vegan has patina'd a great deal. I waited a few days before I finished the notebook, and I think I just used some Aussie conditioner, and a spray finish that I got from Tandy that came in a can. (Can't think of the name of it right now - sorry.) Note-: Usually pre-dyed leather already have a finish on it, so not sure how well this technique would work, but you could always test it out and post your results here to help others that are thinking about doing this. Karina

Gotcha, I see what you are saying now. Karina

A overhand knot after each stitch must be a personal preference because of all the tutorials I have watched, and all the books I have read, none have done a overhand knot after each individual stitch when doing a cross stitch. Karina

He does mentioned that he ties a knot on the inside then show a picture of him burning the knot.

Here is a picture tutorial found online. http://highonglue.com/tutorial/hand-sewing-two-leather-pieces-cross-stitch-pattern/ If you follow the tutorial exactly, you will get what is shown in the 2nd photo, if you reverse what he is doing the cross will be on the inside and you will get what is seen in the 1st photo. Karina

That is one AWESOME bag! I loved v1, but v2 is amazing! Karina

I am a Graphic/Web designer so to protect my images I use Digimarc. It embeds a digital code in the photo that allows me to track that image across the web. This would be overkill if you just want to protect your photos on your own site, but because I have built thousands of sites, it is a must for me. Photoshop or even better the free programs Inkscape and Gimp will do the job as well, and it is super easy. Go to youtube and do a search, and you will find several quick tutorials that will show you how it is done. Karina

I have to agree with you Monica. When tboyce first posted this design, I uploaded a photo and chose to go with a wrap around strap. I was too afraid to use any type of snap that you would have to apply pressure to close the case. My eyeglasses and even my prescription sunglasses cost way too much to chance scratching or breaking. I have seen several designs that use the support piece in the middle which I think is ideal to help ensure you don't damage the glasses inside. It gives you a place to apply pressure if using a snap closure, while keeping your glasses inside a safe distance away. Karina

Very nice bag! I think it turned out great! Karina