Jump to content

howie696

Members
 View Profile  See their activity

  • Content Count

    148

  • Joined

  • Last visited

Everything posted by howie696

  1. howie696
    A friend of mine and I are struggle to stop fiebing black from rubbing off a small projec (watch band)t, so far he's buffed it for ever :-) tried two coats of resolene allowing each coat to dry over night it still leaks through any ideas, I've suggested he stops using the fiebings and tries the good old Raven Oil TIA
  2. howie696
    nothing wrong with it
  3. howie696
    flick me your email so I can send you a copy
  4. howie696
    Thanks you're a life saver !!!
  5. howie696
    I have pictures of all those let me know if you want a copy emailed
  6. howie696
    It's a border tool, I have one but I have no idea how to upload a picture :-)
  7. howie696
    where are you looking??
  8. howie696
    Are these the modern craftools??
  9. howie696
    I bought from Weaver the same knife was about half the Tandy price
  10. howie696
    stupid idea, don't waste good leather
  11. howie696
    the pins are an issue, they are tapered so make sure you can replace them the same way they came out. other than that it's an easy strip down with lots of cleaning
  12. howie696
    Mine have the word "Sturdy adjustable gouge" on the side, they don't seem as if they can be opened all I do is wind the blade down to the limit and polish the bottom on a rouge wheel. I have two and they have no play at all :-)
  13. howie696
    A complete set shipped to Australia, how much??
  14. howie696
    I must be missing something my V gouge hsa no play either sideways or up and down and cuts a clean groove which I then open with a french skive if needed
  15. howie696
    either the impressions are not deep enough or the pad you are using is too loose and floppy, try a hard flat pad of kitchen towel
  16. howie696
    My daughter is a doctor and has one in her kit for pimples and blackheads - make sure it's clean :-)
  17. howie696
    It looks like a blackhead remover
  18. howie696
    The clothes peg works great, most here are over complicating a simple process
  19. howie696
    Sorry totally unfair and very rude I like the discussion about odd tools lets have more :-)
  20. howie696
    looks like an edge creaser, not a beveler
  21. howie696
    Just use a plastic clothes peg
  22. howie696
    any chance of a copy howlee40@hotmail.com many thanks :-)
  23. howie696
    stamp around until you have a few inches to go them use the tool to make faint marks to get the spacing you may have to bunch up slightly or spread out slightly but it will be by a tiny amount and not visible
  24. howie696
    yes thats for all of them, thanks
  25. howie696
    Whats the cost to post to Australia?? thanks
×
×
  • Create New...