-
Content Count
2,354 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Blogs
Gallery
Store
Everything posted by immiketoo
-
Another Dying Related Question: Light/pastel Colors
immiketoo replied to KCrimini's topic in How Do I Do That?
K, I have had exactly the same experience as you have. Thin spray of dye over white acrylic. It's fragile and I've found the only way to protect it is to use an acrylic finish over the top, like resolene or an analog. I use an airbrush to apply both the dye and the finish as brushing leaves the color blotchy or with streaks, and finishing with a brush kills the whole thing. I also found that putting my project under an infra red heater lamp between steps makes everything a little easier to work with. I hope this helps! -
Thumb Break Rivets
immiketoo replied to SooperJake's topic in Gun Holsters, Rifle Slings and Knife Sheathes
Thanks again Jake, I called Tandy and they have something that will get me by, but I hear what your saying. The better rivet will give a more professional look. I'd really like to source some like Galco use. -
What's Happend With Barry King Tools?
immiketoo replied to swivel knife's topic in Leatherwork Conversation
THank you sir, may I have another!? -
Mad Woman With Hammer =Broken 206 Consew!
immiketoo replied to CowboyBob's topic in Leather Sewing Machines
Hell hath no fury... -
What's Happend With Barry King Tools?
immiketoo replied to swivel knife's topic in Leatherwork Conversation
Sorry Ross, I missed that entirely. I'm glad Chief stepped up and tried to help. -
Thumb Break Rivets
immiketoo replied to SooperJake's topic in Gun Holsters, Rifle Slings and Knife Sheathes
Does anyone have any of these or know where I can get them locally? I am in dire need of something that will mount one of these stiffeners ASAP. Jake if you sent something, disregard, but the lady called last night looking for the holster I made for the benefit and it just needs the rivets to be done. Thanks in advance for any info. Mike -
What's Happend With Barry King Tools?
immiketoo replied to swivel knife's topic in Leatherwork Conversation
I hate to see a respected member of our community and a new member looking for help get out of sorts over something like this, Mistakes happen, and Bill was man enough to own up to them and you have to respect that, especially in this day and age. That being said, the issue of the OP has still not been resolved. does anyone here have a closer relationship with Barry than I do? If so, please give him a call and help direct barry to this site or to the OP so they can get together. In the spirit of this website and the leatherwork community, I think that is the decent thing to do. In fact, I will call him today and see if I can't come up with some resolution for the OP. Additionally, I work night shift so I will be available during the OP's timezone in the even that there are questions he needs answered. I will post here with whatever information I find out. -
New Purse With Tooled Flap
immiketoo replied to rosiart's topic in Purses, Wallets, Belts and Miscellaneous Pocket Items
Looks good. The only critique is the stem work looks a little uneven. The color helps hide it and no one but a fellow carver would notice it, but I thought I'd point it out. I really love the combination of the veg and chrome tanned leathers, and your background really ties in well with the rest of the purse. How about some pics of the inside?- 9 replies
-
- tooling
- copic markers
-
(and 1 more)
Tagged with:
-
Proud uncle of a new baby niece, as yet to be named!
-
I bought the respirator mask at the hardware store thats rated for vapors, not the particle version. However, I also created a cheap hood by using a clear plastic tote and my shop vac. Cut a hole big enough for your vac hose in the side of the tote, cut down a furnace filter to fit inside of the tote and put it against the vac hose. Turn on the van and voila! Instant spray hood. I don't use my respirator for spraying because I cant smell any of the vapors. I do use it when I glue with barge though.
-
My New Iphone5 Case
immiketoo replied to hunio's topic in Purses, Wallets, Belts and Miscellaneous Pocket Items
I do. Just sayin... -
Custom Knife Sheath
immiketoo replied to Ash's topic in Gun Holsters, Rifle Slings and Knife Sheathes
Looks great! Good job with the dye. Did you resist the skull first or be very careful? -
Its beautiful on so many levels
-
Bob, that there's funny, I don't care who ya are! But, ya'all are right, It will probably find me like you've said. I suppose I should give it a few more months and see, right?
-
First Craft Show....i Actually Went, Lol
immiketoo replied to DoubleC's topic in All About Us and Off Topic
CHERYL, YOU ROCK!!! -
As a relatively new leatherworker, I have boundless passion for creating things of leather. Gun leather is where I started, but I've found that purses, women's bracelets and belts are also interesting. Guitar straps, knife sheathes...where does it stop? Braiding and lacing, clothing? I'm not interested in garments or saddles at this point, figure carving is something I'll probably delve into only as needed, and things like coasters or key fobs don't hold much interest. Maybe I'm just starting to develop some preferences, or my niche. How did you find your niche? How do you decide to specialize in just a few areas? Should I limit myself to just a few or should I try everything? It seems that aside from the specific tools required for some things, i.e. saddles or garments, most leatherwork is essentially the same. Design, cutting, decoration, stitching dyeing and finishing. I'd love to hear how you chose your area of speciality!
-
So, it's been interesting to see who feels what here and I have a few observations. First, Lobo clearly has been successful enough to be able to refuse an order that he would rather not bother with, and god love him for that. Second, while I still cant think of a scenario where a concealed (Read IWB) light would be necessary, I was approached by one of my detectives who wants a holster for his P220 for plainclothes carry, and I had to chuckle because of the ongoing discussion here! Will I turn him down? No way, but, will I guarantee him it will be as slick as something without a light? No. In fact, I told him what my concerns were, most notably the bulk of carrying a full size pistol/light combo all day whilst wearing a suit. But, if he wants it I'll try it because I'm not as busy or experienced as the OP, and without trying, I'll never know if 40 years from now I should have turned it down!
-
As stated before, those numbers a re a guide only, but only a rough outline. I prefer a smooth pear shader myself, so as long as you follow the basic outline of knife, bevel, shade, lift, modeling tool and decorative cuts, it's really your preference. By not being stuck to what is recommended, you can begin to develop your own style or feel. Even the above order is subject to change depending on what effect you want, so go experiment!
-
Romove Water Marks From A Leather Saddle
immiketoo replied to yeringtonmike's topic in Leatherwork Conversation
I second old timer. -
I NEVER find stuff like that
-
New... "tray"?
immiketoo replied to Ash's topic in Purses, Wallets, Belts and Miscellaneous Pocket Items
THAT'S the word I was looking for! All I could come up with was butler but I knew it wasnt right.