All Activity

That looks great 👍 One thought that went through my head when i saw that was 'Pinhead' from the movie Hell Raiser. I'll put my thinking cap on, pardon the pun, 😀 HS

Love it just ordered one on Amazon. Gets here tomorrow. Thank you!

Thank you! I appreciate the help.

Nice!

@MelissaViarengo Looking at the pictures of your machine, it looks like the teeth have been filed almost entirely flat on the bottom of the foot. The entire feed is done by the teeth digging into the material. If those teeth are blunt, or missing, the foot cannot pull the material back to form stitch length. The teeth on the foot should be sharp to the touch. You can find replacement 29k presser feet on ebay in Italy. While you await your replacement presser foot, try adding some thin rubber or clear carburetor tubing to the feet. 1/8 inch inside diameter should fit on the legs. This may have enough grip to pull the work to form stitches. Add more spring pressure too.

They are for attaching a powder horn. I dont have one or id stick it on there. The left strap gets stitched around the staple on the horn plug (big end) and the other strap gets looped and stitched around the spout end. This secures the horn to the bag

Oops.

Looks good. What are the two small straps coming off the main strap for?

The A team theme music just played in my head lol

I have made a few of this type of bridle, and your's looks very good. One comment, I think your throatlatch is on upside down. Very nice work.

Don't bother wasting your time trying to slow down a clutch motor (been there, done that!), there is a steep learning curve trying to control one for sewing leather. You got those machines at a bargain price so do yourself a favour and buy a servo motor, you won't regret it (you may need a speed reducer too, but try the servo first). There's been lots written about oils, to a point it's not that critical as long as it's a light oil but do not use car engine oil in the long run it can gum things up. The best way for a newbie is to buy Lillywhite Sewing Machine oil if you can. That 155 is a real workhorse.

looking to buy it can anyone prove - does this reducer (box one) have a bearing on the axle?

Always nice when a plan comes together.

Congratulation on your retirement. And for the service

Congratulations, Bruce. That's a service many can use. May it make your retirement complete.

Looks mighty good. I like the decorative work as well as how you assembled it. Outstanding.

Here are some farmed salmon leathers. Canadian dime is 1.2mm thick. The wild salmon are a bit thicker, but it is rare I get my hands on those here in the east.

Thanks!

Yea, that's some beginners luck, alright. Congrats. (In fact, an internet stranger gifted me my first 111w153). I saw your other post about slowing down the clutch motor. Save yourself time, aggravation and money, put a $150 servo and a $125 speed reducer under one of them and get on with learning to sew leather.

Hi All! I am also in the market for an Adler 30 (-10) Service manual if anyone has one going spare!

Nice job on that hat, it looks like a lot of work. Love the design and color, and I think you're right on the black cord, beautiful job.

Good looking bridle! Very tidy work. That should last a long time.

Yep, same needle/awl system. Landis needles and awls are harder to find. If you can't find them, you can convert it to use Campbell needles and awls which have a slightly larger shank diameter. The Landis needle bar collet will flex enough to take the Campbell needle, but the awl bar would need to be taken out of the machine and have someone with a lathe ream out the hole for the awl. The size numbers between the Landis and Campbell systems are different, but in either case your thread size dictates what size needle you use, and your awl should be one size larger than the needle.

Just tracked down both of these beauties in running condition for $200 on offer up!! If I’m not mistaken that’s as beginners luck as it gets in this realm.

I heard neetsfeet oil is a good cleaner and conditioner before dying leather. And I don’t know if it’s true or not but I read somewhere that you can use 100% pure olive oil to clean and conditioner as well. Is that true or no for either of those options?