All Activity

Todays work.

Hi everyone. Made a thing for all of my needles and awls blades. Happened to have space for the awl hafts also. So far it works great. When needing a different awl haft, awl, or needle, it is all in one place. Though I do all hand stitching work, I’m sure this could be adapted for machine applications. It’s practically a horizontal reduced version that a lot of folks keep their tooling tools in. And, made in American elm!

Cut little V-notches on the back side of the piping at the corner radius.

Hey @Trox, is that something you would be willing to share? I would certainly appreciate it. I kinda want this thread to be an archive for the build if anyone ever wants to make one on their own. @fredk haha I’ve had this kicking around for a few years. And then life happened for a few years, and now it’s alive again. Glad you’re here now though. Here is another update for today: All the arm ply pieces have been cut. I’m now starting to glue the arms up. I’m also using tulip poplar for the outer parts of the arm. it’s looking to be about 4.5 inches in width. Was shooting for 6 but that may be overkill. Im thinking the geometry of the cam is off. But I’ll need to get further along to test it. Over all, so far so good.

I am having a problem when attaching piping when it turns corners, its basically leaving a crease on the piping on the inside of a 90 deg corner. I wondered if anyone else had this problem and have any tips to stop this happening please

Found my bobbin case has a groove worn into the case and the spring, that would explain why I could never seem to tighten the bobbin thread. Can anyone suggest a supplier for a new one? Curious too if anyone has tried an aftermarket one or is it something you would only use a genuine Pfaff part for? The number is 91-08 348-91 for the complete case and spring. Thanks -

yes and you can do the same in your home. dissolved minerals and chemicals are two diferent things and so need the correct filtering media for your water. That's what I am saying, they are just filters for the very same water you use but someone actually tests the water and uses the correct filters. Its isnt majic lol. They don't pipe in special water for grocery stores. I have been filtering my home water for years.

@Cranky, this is a pretty old post. Are you still looking? If no response in a day or so, we probably should archive this one. @briar, maybe you'd like to list that nice machine in our classified section and move it along to a new home? Cranky hasn't been here in a long time.

This is all very interesting How did I miss it at the beginning?

Cranky if you are still looking, i have a Cowboy 4500. It is the same machine different brand name. I have original boxes to ship it in. briar

It's the only place I buy from anymore. Cheryl's a hoot! Still not cheap though.

I got detail pictures of that lock from the man that designed it

Great work Hans! I've been looking for both a pot meter pedal for a frequency drive and a large thick aluminum plate for a long time now. Obviously I got to find the plate for a clicker hammer (head) locally (Norway) but that pot meter pedal, can I ask where you bought that. And does it make you motor sound bad, scream on some rpm's? Thanks Tor

A couple of old blankets can be laid on your table/workbench when working on saddles to protect them from damage they can be folded up after use and put away or a old rug can be used roll it up after you have finished. I use free standing workshop lights for better light in the winter months L E Ds cheaper on the electric bills Hope this helps JCUK

Thanks! I am getting good treatment. Which I think means the retailers see possibility. I never did continue with the fobs. Made a bunch, but haven't yet made a batch to figure out exactly how much they cost. I got the die-cutters to use scrap more than to make stuff. I think the stores would like it plenty, but I have to run through enough of them to understand how many hours etc. they take. Plus I haven't yet figured out just how to use more sealhide. The stuff would sell better, for sure, but to me it looks wrong. So far. I do make traditional mittens, and THOSE look good, but I don't really want to compete with those anyway. They go for about 350 for a plain set, so it pays well enough...but I guess I like tooling leather better, even though I don't tool so good.

The IP address resolves to tor-exit-2 Stockholm, Stockholm, 100 05, Sweden Assuming he's not using a VPN to some other location. (Virtual Private Network)

Chuck, this water is filtered to remove all chemicals by reverse osmosis. So, there is NO chlorine, and the calcium and other chemicals that make your tap water hard are also removed. I know this for a fact, as the water cooler doesn't get mineral deposits in it the way my teakettle, cookware and other items do. Believe me, it tastes and smells a LOT better than the tap water!

Cheryl is the MAN (sorta) ... Never had a side I wasnt' more than happy with, even after paying shipping to IA.

@jcuk Thanks for the nice comment. The only thing stopping me from sitting in the sofa is that that the light is a lot better in the other part of the living room 🙂 I have considered getting a small head lamp though, since no matter how I do it, I always end up with some of the work being done in a shade. Especially when I have to do any stitching on the flaps. That coupled with black thread is sometimes enough to warrant a small break and a cup of tea to sort of reset myself. I have occasionally considered making a padded table where I could lay saddles on while repairing them. But then again, it takes up space, so I am debating if I should make like a padded tablecloth to put on the regular table. That would take up less space. Brgds Jonas

Thanks for the links!! It turns out I was way overthinking it, lol. This edge is very easy, and the corners aren't as big a problem as i thought.

Nice looking stuff and some good locations IMO. Those seal skin fobs should sell well i would think they would make good souvenirs at the airport. Market them as zipper fobs for coats in the winter lol.

iT IS THE BIGGEST RIP OFF, and it's our governments doing it. We pay taxes to have good water. If that isn't happening, then we aren't getting what we pay for from our city. No one should have to buy bottled water anywhere in the modern world. I can't believe people though they go to the grocery store and buy water from a machine that's hooked to the very same water running in their taps at home. If you live in the same town that bottles Dasini its the same water. All those water stations are just filters, just like you can buy and install in your own house. Probably nowhere near as good as a home filter and i can tell you not as well maintained as a home filter would be.

Was able to work on the Al Shelton piece some more after dark. It is a large piece for me and is going to take a while.

Top notch. Did have to return a side once, they took it back. Usually I really like what they send, it is what I ask for.

I'm looking for matching dark brown in 138 and 207, not sure if that matches up to anything you have?