Jump to content

Luke Hatley

Ambassador
 View Profile  See their activity

  • Posts

    2,995

  • Joined

  • Last visited

 Content Type 

Everything posted by Luke Hatley

  1. Luke Hatley
    IF I WERE TO DO THAT I WOULD USE GROMENTS THE SMALEST SIZE YOU CAN FIND.
  2. Luke Hatley
    Peterk....have a look at these............ these might give you some ideas...
  3. Luke Hatley
    Got an old gun case in to do some re burbish & repair. the lining has came loose on the inside. the lining was never sewn on the closer part. it looked to me like it was glued to some type of thin paper board then glued to the leather. anyone have an idea what type of paper that is. i do not think that the lining just glued to the leather will work. any sugestions.
  4. Luke Hatley
    I DO NOT HAVE A TREADLE MACHINE BUT I DO HAVE" THE BOSS", I USE NYLON THREAD. SIZE IS #207 IN THE BOBBIN AND TOP STICH WITH #277.
  5. Luke Hatley
    RAY........... NOT J W. but getting wet is ... life of the Buckaroo........
  6. Luke Hatley
    KEN , REMEMBER....."WINE WOMEN MITH AND LAUGHTER SERMON AND SODA WATER THE DAY AFTER."
  7. Luke Hatley
    . and thats my story and i'm sticking to it.
  8. Luke Hatley
    GTECH. HELLO.whether a craft store , like michaels or hobby lobby sells the belt kit i do not know. you might check some of the tandy stores also to see if they sell the belt kit. since you have the guitar strap take it apart and photocopy a belt link and have weaver to make you a cutting die . then you can make all the links you would like.
  9. Luke Hatley
    fine looking start..................(ps i grew up in BRYAN, IF THAT MEANS ANYTHING).
  10. Luke Hatley
    try this www.pilgrimshoemachine.com ask for Harris. this will be a start.
  11. Luke Hatley
    i see it....... Nice. what type of lace do you use what type of braid is that.
  12. Luke Hatley
    it shows promise..........you did well prigrilm........fine looking oak leaves
  13. Luke Hatley
    hey all ,keep em comming i am learning a lots. An old saddle maker told me."do what works best for you,but dont forget what the finished product is supposed to look like". THANKS ALL FOR YOU SUGGESTIONS.............
  14. Luke Hatley
    nice bag. what color is that.
  15. Luke Hatley
    Ray , thank you. what i probably should have said "my fringe is cut after the item of clothes are made". i did try Jerrys Stripper once, but could not get it to cut the fringe on the sleves like i wanted to. imagin this, when you are pulling the deerskin you are streching it comming from the stripper so if i wet the skin and use the razor blade to cut i am not pulling on the skin.
  16. Luke Hatley
    if i cut deer skin or elk i will wet it with a spray just to moisten it. this will let the skin stick to my cutting surface. the framing square is laying on the left side and i am cutting on the right. i will be cutting 1/8 or a tad larger. ( works for me)
  17. Luke Hatley
    Hobbit........dont listen to Ray.... i use a 12" framing square , a LOT of razor blades in a box cutter holder. lay the framing square on what you are going to fringe. and start cutting.
  18. Luke Hatley
    nice..........
  19. Luke Hatley
    Holy smokes.........you lucked up on that ......... must be the Hatley in you......
  20. Luke Hatley
    Just a thought.........Harris at "prilgrimshoemachine.com" might be able to help you good luck
  21. Luke Hatley
    WELCOME TO THE CLUB.
  22. Luke Hatley
    EYELET SETTER.........
  23. Luke Hatley
    that Geisha is just right for "rice burners" but you did do a great job on the carving. Lets see a skull the next time.
  24. Luke Hatley
    HOBBY TOM.... re- load the bobbin, back stich , and hope your needle hits all the holes you missed and just remember "always check your bobbin''.
  25. Luke Hatley
    A 1/4" WAS USED ON MINE.
×
×
  • Create New...