MikeRock

What's the spacing between the inside of the rails? 4'8-1/2" is standard in the US, dating back to England and thence back to the Roman roads... long history for a weird number. Narrow gage has many variants, but 3' is fairly common. God bless, Mike

Jay, Any harness makers or saddle makers around your area? My Amish buddy up here buys enough HO from the factory that he gets great stuff, and will add my requirements to his order. I pay his invoice prices too! I'll buy a bit from various suppliers when he does not have an order going in. God bless

Hi Dwight, Thanks for the pictorial!! Why are the .22's spaced out so far? I'm working on a belt and holster right now for an Uberti/Colt SAA in .45LC. The .22 will be next, for a Smith K-22 I got in 1965. God bless

After pushing the burr down, compressing the leather, did you clip/cut off the rivet, leaving just enough to peen over?

Nice little knife! I wonder what the odds would be of an owner named Rose stamping his own mark on top of the manufacturers mark? God bless

Wife is building bluebird houses..... getting ready. Always fun stuff, thank you Stewart! God bless

Here's what they are talking about.......my oh my....... just above this was a price of 42.30 L......but that was for 1,000 needles!!! You may also like Saddlers Harness Needles £1.47 (Ex. VAT) Glovers / Leather Needles £4.13 (Ex. VAT) Glovers / Leather Needles £133.79 (Ex. VAT) Saddlers Needles £1.42 (Ex. VAT) Leather Sewing Needles £1.09 (Ex. VAT) Leather Sewing Machine Needles £1.55 (Ex. VAT) Curved Mattress £5.60 (Ex. VAT) Household Repair Needle Set £1.55 (Ex. VAT)

From their facebook page.... some additional contact information for their tools. Dear Friends and Customers, We have been selling our line of "Douglas Tools" as well as our "Vintage Tools" for over 30 years. But it is time for us to retire. Lee will be contacting those who have existing backorders of our Versa Groovers and tips, as well as Awl Blades. We appreciate and give credit to our long time machinist Herb French, who has been responsible for the high quality of metal work these many years. All new orders for our tools should be sent to Herb French, phone 307-737-2412, in the evening. Our daughter, Sara Hagel will be selling the remainder of our "Vintage Tools". Sara also has many "Vintage" tools for sale. You may contact her at 307-751-8158. To you, our customers and friends, we send our sincere thanks! Bob and Lee Douglas

Nice workmanship. Also fits right in with the thread on Blackjacks. Now we can tell the cops it's a fid!! If anyone needs one I have a cast bronze cable vise used in splicing. Have two steel fids for it as well. Limit around 1/2" wire rope. Came out of a SE coast shipyard.

I sure agree with Uwe if you have several three phase machines. As a machinist since the seventies, I've watched phase convertors come and go. The American Rotary is a sound unit. You can make your own with a three phase motor and a capacitor, but just buying the danged thing is the best bang for your buck if you are electrically challenged. I bought a one horse power lathe with a solid state unit on it and hated it from day zero. There were too many solid state circuits and adjustments to make. For a couple hundred bucks I got a very good single phase motor and went to making chips. For another set of machines I got a good American Rotary 5 hp unit and from unpacking to making chips was a couple hours. For sure, let Bob Kovar set you up if it's just these two machines, you can't go wrong with him. It should be the cheapest route to sewing with your new toys. God bless

Hit the little lump on the back of your skull......nappy time. The medula is sure sensitive to getting whacked. Nasty headache when you wake up too. Here in WI, saps are covered by your CCW. Sock full of sand works too, empty sand and put your sock back on.

I used Duck Duck Go to search vintage plough gauges.... what a wonderful rabbit hole to wander around it... Lots of links back to this site as well. Enjoy. God bless

Oh boy!! Please, some photos. God bless

Yes!! Slate too. Thank you. God bless

And you can incorporate the 4 legs into the straps. :: A while back someone posted a face mask with what looked like wrap around bony fingers. I had a vision of your dino legs wrapping a few inches further from the pack to up the wearers shoulder and up to mid waist....on the side of the hip. Being grabbed by the dino... oh well, it's all in my mind. God bless

Any idea what the orange tag says?

Fred, The part under the added on clicker base appears to be curved. Was this originally a brake shoe repair press? God bless Well, Googling that idea was a huge bust.... not a brake shoe repair press.

My old ones were 8 oz.

Hi, Do you mean that lace protector thing with the pinked lower edge? I'll pull one off my boot and measure it up if that's the idem. God bless Been wearing Red Wing loggers since 1966. I wish Red Wing had made a caulked/corked version of that boot.

Well, Dustin, you 'beat' me to it! Now imagine what a four pounder will look like. Nice work, Chuck. God bless

Dwight, Thank you!! God bless

Thank you Dwight. Do you have a photo of your rig in action? God bless, Mike Rock Pastor Bob, that Adams site is funky. The various pages only stay up a few seconds then go blank. I was able to look at one very out of focus photo for a few seconds. I'm running Firefox.

Ah, Lawrence. I was in love with one of the Lennon sisters. When folks talked about the Strasburg drunk, they had old 'Wunnerful' in mind. Big party there every summer, not too far from one of our ranches. If you could reach up to one of the table tops on saw horses, you were old enough to have a beer :)) Miss that music, and the musician... (Strasburg, North Dakota)