Frodo

soaked it, then baked it

Unfinished, i need bees wax,

I open carry a 45, the chain gets all tangled and you look like barney fife trying to draw your weapon

have you ever wrecked a bike? I have, because of that experience I orient the pockets on my wallets to be on the inside not the outside If my wallet falls out of my pocket a 40 mph. I do not want its contents all over the road with some truck driving over everything. This is a simple 3 piece wallet. it is 8''x8'' and 3''x8'' The 2 pockets is really all need, i one for cash, yep it is empty LOL one for cards

dowel rod and electrical tape

Have you checked the machine for correct needle length? My machine acts like yours when the needle is to short

Cheap tools will make your work look like ,LOL Ok. right here I could really get into trouble but I am going to hold my tounge Cheap tools will make your work look cheap. here is an example of what I speak. my compas cost around 8 usd at wally world I used it all the way around both of these pieces of leather Do you see how I am flush on one side and standing proud on the other? I did not want to spend $20 or $30 on a compas, BUT. it looks like i have no choice

my advice, find a machine shop in your area, take it to them and tell them you want the hole welded filled in, then a new hole drilled they usually charge by the hour, i do not see more than a hors work, $45.00 is a fair price for what i see and, YES, cast iron can be welded if you have the right tools and a trained welder

Thank you for the complement . The guy did not want cartridges loops. he wanted the conchos in place of them

2 layers of 9oz veg tan

You must use a resist, Here I painted the leaves and stems with resist, waited till the next day and antiqued it

I think you need to watch this. i find it interesting,

I am liking that very much. It speaks to my eyes. [that sounds silly. but was my first impression] just a weird thought. If you have a bunch of these, and were to cover them in a clear epoxy, you could tile a back stop or table top

well post the chart. learn all of us something

Mr James. what size thread are you going to use? I use chisels instead of punches, here are the chisel sizes, you need to match up to your thread size

WOW. Here is a email I got this morning. Thanks for bring this subject back up.. You gave me good JU JU FO tony <office@dieselp......... To:Brian Fri, Feb 12 at 7:28 AM Hi Brian Guess what I got today :p: the travelling awl! After going around the world it finally made its way to me Thank you vey much, I will use it every day, it looks amazing And my Palosanto one just broke a few days ago so it is good timing Thank you again Best regards Tracking History February 11, 2021, 4:17 pm Delivered ROMANIA Your item was delivered in ROMANIA at 4:17 pm on February 11, 2021. February 11, 2021, 10:31 am Payment of charges - Item being held, addressee being notified ROMANIA February 11, 2021, 5:59 am Out for Delivery ROMANIA February 10, 2021, 1:49 pm Processed through Facility BUCURESTI C, ROMANIA February 10, 2021, 1:49 pm Customs Clearance Processing Complete ROMANIA January 31, 2021, 5:02 pm Held in Customs BUCURESTI C, ROMANIA January 31, 2021, 4:56 pm Customs Clearance ROMANIA January 31, 2021, 10:37 am Processed Through Facility ROMANIA December 25, 2020, 7:40 pm Departed NEWARK, UNITED STATES December 24, 2020, 5:02 pm Arrived NEWARK, UNITED STATES December 21, 2020, 1:45 pm Processed Through Regional Facility JAMAICA NY INTERNATIONAL DISTRIBUTION CENTER December 21, 2020, 11:44 am Arrived at USPS Regional Facility JAMAICA NY INTERNATIONAL DISTRIBUTION CENTER December 21, 2020, 11:44 am Arrived at Regional Facility JAMAICA NY INTERNATIONAL DISTRIBUTION CENTER December 17, 2020 In Transit to Next Facility December 13, 2020, 11:02 am Arrived at USPS Regional Facility MIAMI FL INTERNATIONAL DISTRIBUTION CENTER December 9, 2020, 12:56 pm Departed USPS Regional Facility JACKSON MS DISTRIBUTION CENTER December 2, 2020, 2:02 pm Arrived at USPS Regional Facility JACKSON MS DISTRIBUTION CENTER December 2, 2020, 10:06 am Departed USPS Facility OXFORD, MS 38675 December 2, 2020, 6:45 am Arrived at USPS Facility OXFORD, MS 38675 December 1, 2020, 1:12 pm Arrived at USPS Facility DISTRICT HEIGHTS, MD 20747 December 1, 2020, 12:08 pm Departed USPS Regional Facility MERRIFIELD VA DISTRIBUTION CENTER November 29, 2020, 9:49 am Departed USPS Regional Facility DULLES VA DISTRIBUTION CENTER November 29, 2020, 6:05 am Arrived at USPS Regional Facility MERRIFIELD VA DISTRIBUTION CENTER November 29, 2020, 2:13 am Arrived at USPS Regional Facility DULLES VA DISTRIBUTION CENTER November 27, 2020, 9:57 am Arrived at USPS Regional Facility JAMAICA NY INTERNATIONAL DISTRIBUTION CENTER November 23, 2020, 9:16 am Departed USPS Regional Facility MIAMI FL INTERNATIONAL DISTRIBUTION CENTER November 22, 2020, 3:07 pm Arrived at USPS Regional Facility MIAMI FL INTERNATIONAL DISTRIBUTION CENTER November 22, 2020, 2:17 pm Departed USPS Regional Facility OPA LOCKA FL DISTRIBUTION CENTER November 22, 2020, 4:23 am Arrived at USPS Regional Facility OPA LOCKA FL DISTRIBUTION CENTER November 20, 2020, 9:56 pm Departed USPS Regional Facility JACKSON MS DISTRIBUTION CENTER November 18, 2020, 9:35 pm Arrived at USPS Regional Facility JACKSON MS DISTRIBUTION CENTER November 18, 2020, 11:04 am USPS in possession of item BROOKHAVEN, MS 39601

seems the body leather is veg tanned, or rather it is burnishing with tokonole but the leather from the leg is chrome tanned.I think I can dye that edge

thanks.

HI, I have some ostrich that i need to finish the edges on. I have never attempted working with leather so thin I am at a loss. any suggestions. here is what the leather looks like

I bought a sheet of bag stiffener or the cover of spiral note book or a file from the filing cabinet and have actually sewed it together, to completion. and then tore it apart to make patterns, sometimes you just have to make do. No template, took a picture off of the internet, glued it to wood and made a template then started making the holster using bag stiffener using some of the original components

NO. they lost it. and refuse to payout the $50.00 insurance claim They say when it got on the plane to go over seas then they had no way of tracking it in other words the insurance they give you is not worth a dingaling

This how I cover a whip handle, You need, A a piece of 3/4'' pvc what ever length you need A 3/4pvc cap, for the other end, i use a 1'' coupling, a 3/4 coupling You will need 25 lengths of lace 6'' longer than the pipe 1 piece of lace that will spiral around the entire length of the pipe For the other end saw the 3/4 coupling in half. inside the 1'' coupling is a small pipe stop ridge, dermal that ridge gone the 3/4 coupling should slide into the 1'' coupling push it in half way glueed cover the 1'' coupling with a braid slide it onto the handle that you made, the coupling should over hang the pipe just enough to dress up the edge epoxy the whip into the 3/4 pipe

working on the layers, 12 plat

I have a bottle of 50/50 neatsfoot and olive oil that I sprits it as i am braiding, next iscutting about 450' of lace, then dye it, then oil it