Wizcrafts

If we accept that a Singer G bobbin is the standard for 1x, the small patcher bobbin would be about 1/4 x and the large bobbin would be about 1/2x. With #138 thread, the small bobbin might hold 4.25 yards and the large, twice that much (maybe 9 yds). This is based on my box of prewound T70 bobbins for my small bobbin patcher. They are 9.5 yards each of v69/T70. #138 is twice as thick.

No, because iPhone users don't normally have Google Search installed. I have an Android phone and Chrome browser on my computer and only use Google search to find stuff. I don't know what results would show in an iPhone or Mac computer search for that video. Also, YouTube is part of Google.

I do believe that if the portable Leather Worker machine is just a dressed up Sailrite straight stitch, the standard Sailrite feet are piping feet and should fit it.

So, it is now a 12 ounce belt. I would use #207 thread at that thickness. It will be easier to bury the knots. Or, if #277 is really needed for top appearance, I would use #277 on top but #207 on the bottom. I can still do the job.

@JLSleather I can make a double leather gun belt for you. PM me to discuss it.

All your post are belong to us!

I guess you don't use the Google search engine or you would have found these results on that very subject: Setup video for a Juki LU-563

I used to have a Juki LU-563 that had a bouncing stitch lever. The faster I sewed, the shorter the stitches became. I had to replace the spring that held it in position. Many years ago. Look at the inside of the lever and see if there is a spring that's maybe stretched out, or missing, or loose.

He has been flagged as a spammer and restricted from posting without mioderation. This could be a hacked/stolen account transformed into a spam account.

You can't have too many Cowboys! 1883, 1923, Yellowstone on!

Techsew, a division of Raphael Sewing is in your city. Techsew is a leather sewing machine brand. There are several cylinder arm models in their lineup. I have a Techsew 2700 cylinder arm walking foot machine that came with a table attachment. It is a good light to medium duty sewer. I have used #138 thread in it, but #69 and #92 works better.

That is not his website! CowboyOutlaw in not affiliated with Toledo Industrial Sewing Machines, which is owned by Bob Kovar. They are a Cowboy dealer under the brand's US distributor. They are also a Consew and Juki dealer and sell refurbished Singer machines and other brands. CowboyOutlaw is affiliated with that other company. As for motors, Toledo Industrial currently sells the Consew CSM-550-1 servo motor. Previously, they sold the Family Sew FS-550s servos. I have 6 of those on my machines.

I use a variety of brands, some of which are listed below. Cowboy bonded thread from Toledo Industrial Sewing Machines Superior bonded thread Amann Strong-Bond from Wawak.com QTC Hi-Spec thread Miscellaneous brands from The Thread Exchange An occasional spool of Weaver bonded thread With all of these brands, there are bound to be good spools and bad spools. A good spool is well bonded, but not coily like a spring. The bonded thread should stay together when you clip the end with a proper thread snipper (aka: Wiss). If you buy a brand that works well, stick with it as much as possible. If a brand keeps separating, move on.

Actually, a #18 (metric 110) needle is best for v69 (T70) bonded thread. I would only use a #19 needle if the machine struggles to pull up the knots with a #18 needle.

The Singer 29 series are shoe and boot patchers. I use mine to sew embroidered patches onto vests and jackets. It is also good for getting into tight places like the sides of purses to sew on new strap tabs. In other words, this is a machine for repairing leather or patching leather goods. It is not for producing them, but can get you through until something better comes along. The reason I don't recommend using a patcher as a production machine is because the small bobbin version has an absolutely tiny bobbin, with a quarter (1/4th) the capacity of a Singer 111. The large bobbin model has half the capacity of a Singer 111, or 211 walking foot machine. The drive is top only via teeth on the foot. The teeth will leave marks on the top of veg-tan leather. It can sew approximately 6mm to 7mm thickness. The stitches get very small at that thickness. The thread must be very thin to go any distance, so most patcher users run them with T70 in the bobbin for a small bobbin or T90 for the large bobbin models. This size thread is good for wallets and patches, or fixing loose seams in shoes or boots, but not so much for thick leather.

A Singer patcher should operate smoothly as you rotate the balance wheel. Try to isolate the location of the bind and clanking. There should never be any binding or clanking of parts. I would recommend removing the revolving head assembly to see if the problem is somewhere inside there. Also, replace the needle with a new System 135x16, or 135x17, or a system 29x3 or x4 needle. I once bought a 29-4 patcher that had a household needle in it. Those needles are too short to reach the shuttle.

In case anybody is curious why these old machines and current 441 clones have wheel disks on the bottom, it's a carry over from the days of waxed linen thread. The bottom roller didn't just roll with the thread. The big spring provides tension to resist rolling the wheel. While bonded/lubed thread moves semi freely around the wheel, waxed thread is grippy and that bottom roller actually has an impact on the top tension. That effect is much less with bonded and lubricated threads made today. But, if you wrap two full turns or more it does help fine tune the top tension. However, unlike the upper tension disks, that extra tension is never released when you need to pull the work away after the end of the stitch line.

I use a #18 needle with v69 thread and a #25 with v277 thread. Your needle is the right size for 277. Something else is wrong. That something is either causing the top thread to lose tension on the upstroke, or the bottom thread is hanging up as the top thread goes around the shuttle and tries to pull it up. Watch the thread go around the shuttle and see if the bobbin thread is getting caught on the feed dog or its mechanism, or the hook itself on the way up.

I can't do anything about you forgotten password, but I can offer a suggestion about the change in tension with longer stitches. In effect, with all things being well balanced at short stitch lengths, when you make much longer stitches you draw more top thread than bottom thread and the top tension decreases somewhat. When this happens to me, if I can't reduce the bobbin tension any more, I move up one needle size. I also increase the throw of the check spring so the top thread is held taut longer.

Frodo, do this test. With the machine threaded with your usual size thread, gently pull up from the top and down under the foot on the top thread. Is there any tension on the thread, or is it totally loose? It should have some tension holding onto the thread. If the thread is very easy to pull through the snout, lower the needle bar all the way to expose the bottom of the paddle spring, which is immediately over the needle mounting bracket. Take a small screwdriver and gently push against the paddle and see if it grabs the thread tighter. If so, it may be that some thread fragments are caught between the spring and needle bar thread channel. Running the thread down should clear it. Compressed air may help if shot down through the top of the thread channel. If the spring appears to be bent, or cracked, it must be replaced. This is requires punching out the tapered stud on top at the needle bar/take-up lever junction. It pushes out from front to back. Then you remove the presser foot and screw, then pull the needle bar out from the top. The paddle spring is secured by two tiny screws. One or both of them may have been filed down on the leading edge so it clears the bushing as the foot is turned in any direction. Carefully remove them and keep them separated left and right so you can reinstall them in the same positions. Clean out any debris in the thread channel. Get a new paddle spring and fasten it down all the way, minding the position of the screws. NB: If you have to replace the screws they may need to be filed a bit on the edges that protrude of of round and might touch the revolving bushing. The paddle spring is responsible for holding the top thread taut as the hook comes around to pick off the loop. If that spring is twisted, cracked, gouged or too loose, the loop will dissolve before the hook can pick it off. Sometimes, users will deal with this situation by loosening the top spring that pulls the check lever up, so it drops down easily. Then they compensate for a lack of thread control by tightening the barrel adjuster to force the lever up. I've done this a few times on patchers until I obtained a new spring and found time to install it.

Is that a Singer 29? What sub-model is it? Your video doesn't show enough of the top of the take-up rack to ID it. Early models only have a flat spring on top to pull the take-up check lever back to keep the thread taut. A tight spring keeps the thread taut for most projects. If the top spring, no matter its style, is loose, the check lever tends to drop down too soon and stay down, thus leaving the top thread looser than it should be. So, try tightening that top spring. Later models also have a barrel shaped adjuster to force more slack when sewing thick jobs. When it is fully backed out it has no affect. As you screw it in the check lever is forced to stay up. This adds slack thread on top. That may help maintain the stitch length in thick leather by reducing the back pressure that tight thread causes.

If the file is too large to upload here, you can send it to my by email, or private message via the forum and I will upload it to our archives.

I recommend looking into a Cowboy CB3200 at a minimum. I personally have a CB4500 that I use for holsters, sheathes and all manner of heavy leather projects. These machines are built to sew thick, dense leather with large diameter bonded thread, using needles that resemble roofing nails. The 3200 sews up to 1/2 inch. The 4500 sews 7/8 inch. Both easily tension #346 bonded thread. Don't dink around with lesser machines if you want to get serious about sewing handgun holsters and knife/axe sheathes. They need thick thread to keep them from coming apart under stress. We even used our 4500 to sew a super sized sheath for a Pig axe carried by a volunteer firefighter. These axes are used to break down doors and walls. The sheath needs to be super strong to hold its weight. Don't dink around...

I have a Singer 168g101 and there's no way it will meaningfully sew 27 ounces of veg-tan leather. It might handle 20 ounces with #138 thread using a #23 titanium coated leather point needle. The machine uses a Singer G size bobbin (aka: 1x) and has about the same walking foot mechanism and handling capability as a 111w103 or w153 (not 155). It is best limited to a sewing thickness of about 5/16 inch and maximum thread size of 138, top and bottom. I mostly use my Singer 168 post machine to sew patches onto vests and ball caps. Once in a while I sew bag bottoms on it. It can also sew hats together if you want to venture into hat making. Miy machine is normally threaded with #69 bonded thread and a #18 round point needle (for sewing the edges of embroidered patches).

I've had a few sewing machines that lacked a (working or non-existent) thread tension release. I learned to just pull the thread through the take-up lever to free the work. I don't know if your Boss has a tension release or not. If it does it may need some adjustment, or a missing part.