Northmount

This is all the ebooks available currently. https://www.leathercraftlibrary.com/category/79/ebooks?pagenum=1 Tom

https://www.leatherworker.net/mtnlion/index.htm

@Somiskid moved your post to Tooling, Stamping & Carving Leather, Dyes, Antiques, Stains, Glues, Waxes, Finishes and Conditioners Have you searched this forum? Might find what you are looking for here. Tom

@EdJMoved your post to leather sewing machines Tom

@Savvas Moved your post to Leather Sewing Machines Tom

@electricmason Moved your post to Leather Sewing Machines. More help is likely here. Tom

What motor is one it? If it is a digital servo motor, there is a program setting for direction of rotation. If you want more help, you need to specify what the motor is, and a picture may be of help too in identifying it. You should have an instruction sheet for the servo motor, should have been supplied by the vendor. You should also go back to the vendor for his help and support. Tom

And the 20U has a single hole needle plate available, so becomes a straight stitch machine. I have switched mine over. Tom

I'm making some assumptions here because I've never tried this. I prefer jackets or coats that are not squeaky as the noise interferes with my hearing. I have substantial hearing loss so any additional noise hampers being able to hear and communicate. If for instance, alcohol will remove and stiffen the leather, then I would suppose spraying the grain side of the leather with a lacquer based finish (which is a hard finish versus those that may have some oils in them) would bring back some of that squeak. This is just an educated guess. You will need to test it out. Might be able to do this on the inside bottom jacket hem. I have belt that is finished on both side with a lacquer finish. It squeaks like a saddle. It's far enough from my ears that it doesn't annoy me like a jacket or coat does, especially when in the car trying to talk with someone. Tom

@Kenneydin Moved your post to Leather Sewing Machines Tom

@mloser Moved your post to Leather Sewing Machines Tom

@TKLC Moved your post to Suppliers. You might have more chance of getting help here. Tom

I notice that with leather jackets that I have, that stiffer leather produces the squeak. Soft leather ones I have, have never squeaked. Tom

@Squirrel42 Moved your post to Leather Sewing Machines. You are much more likely to get some help here. Tom

Copied from Tandy's website: "As you may know, we have been closely following the guidance of the CDC and local health officials on COVID-19, and we’ve been making decisions about store closures on a day-to-day, location-by-location basis. We want to do everything we can to limit the spread of the virus, so we have taken the step to close all our locations to the public effective immediately, even where it has not yet been required by state or local authorities. To shop, visit tandyleather.com or place an order by phone and have your supplies delivered to your door. We are currently offering FREE shipping on orders over $100. *Exclusions Apply" Two stores in Calgary and neither of them show up for online ordering. See above. Tom

Only store available for me says El Paso as well. Did a store search and it locates the city but still says the closest store is El Paso! Tom

Hard to send a message to you when you don't list where to send it. Only members can send PMs (private messages). Guests can not. Why don't you join and then you can post under the marketplace. Help Wanted is more like the classified ads, people looking for work, or employers looking for help. Every post in help wanted has to have moderators' approval before it can be seen by the public. Tom

maybe "water trough" Tom

Have you looked at the banner ads at the top of the page? Each time you refresh, a new set of ads appears. Texas Custom Dies is one of them. You could also do a google search something like this "site:leatherworker.net clicker dies manufacturer" without the quotes. May need to change the search words, but you will find this is a common question asked and answered many times. Tom

Sounds like a screw has loosened up. Tom

A couple ideas to try. Take a beveler the width you want the line to be, line it up against a straight edge and drag it along the leather several times until you get the depth or burnish you want. (Assuming no swivel knife cuts) Make up a simple tool like used to press the spline into window screen frames. Use a washer the width you want the line to be. Run it along a straight edge on your leather. Have you figured out a tool for the rest of the design? Make up a couple stamps to use sort of like basket weave stamps. Use a SS bolt. Looks like a couple circles filed in the face of the tool would work for this design. Tom

I like a lining in leather caps and hats. When you have a bald spot on top, the leather gets hotter than heck, and makes for a headache. In the winter, it also helps to keep that bald spot warmer! I need the insulation. Tom

Try a google search "site:leatherworker.net marble leather" without the quotes. You will find a number of posts about it. Tom

You can also press it into properly cased veg tanned leather. Tom

Clean with saddle soap and wipe it down with the yellow coloured Listerine. For those that are having trouble with leather going moldy or mildew while tooling and taking a break for a couple days with the leather bagged to preserve the moisture content (casing), add some Listerine to the casing water. Tom