Northmount

Dye is not a finish. If you want to protect it from moisture, pick a finish that is somewhat water resistant. Lots of them are. To get a nice high polish, wax the surface. You can dye any time you wish depending on the result you are looking for. If you dye an article before punching holes, you can go back with a small brush and touch up the holes. You can dip dye the whole thing after all the cutting and punching. You can use an airbrush to apply dye. ... Tom

1. Move to another state 2. Travel out of state to purchase Tom

I have a jug of NFO that is many years old, probably from the early 50s or even in the 40s. It had been stored in a shed that was subject to -40C to +35C. It's still good. Tom

Very beautiful work. Tom

@Chamod Moved your post to Leather Sewing Machines. You'll get more answers here when dealing with Sewing Machine problems. Tom

@grimdaddy Moved your post to gun holsters ... Help wanted is like classified ads looking to employ or for employment. Every post requires approval. I see from your IP address that your are in the Virginia, Queensland, 4014, Australia area. It's a good idea to add your location to your profile so you can connect with people that are more local to you when you need locality based help. Welcome to the forum! There is lots of info, examples and people looking to help here. Tom

I would definitely call this a skiver rather than a strander. Doesn't cut strands! Tom

The OP hasn't returned to this site since Mar 22. Since he has no interest in responding, I'm locking this thread and moving it to Old/Sold Tom

@J1100 Moved your post to leather sewing machines. Your are more likely to get a response here. Tom

I had a flyer delivered that said they would refund memberships or credit them against your purchases. Check with your store to see if they will do it. Tom

OP is in the Mesa, Arizona, 85201 area according to the IP address. @kayw It's a good idea to put your location in your profile so people can provide answers and helps relative to your location in the solar system. Tom

You were missing photos. Without photos, you would need more description. Thanks. Tom

@UCdaiLOI Moved you post to leather tools. Help Wanted is like classified ads in the newspaper, looking for work or looking to employ someone. All posts in Help Wanted must be approved by moderators. Tom

@carstripper please read and comply with the marketplace rules https://leatherworker.net/forum/forum/70-announcements/ Tom

You might have to search for it. I don't access this site from my phone. It may be below banner ads. It may be somewhere under the menu items. It could be on your page view. All guesses! Tom

To all users, if you are interested in following an item (without clogging up the thread), go to the top right just below the menu bar and click on follow. Tom

Re-size the photos to about 800 x 600 pixels and you can upload many photos in one post. Tom

@bruce johnson Hey Bruce, could you add your expertise to this question? Thanks Tom

According to the OP's IP address, is located in the Paso Robles, California, 93446 area. @vintageredesigned Always a good idea to include your location in your profile. Nice to know what part of the solar system you are in so people can see if they are really interested. Probably pretty expensive and long shipping time from Mars! Your should also give information about shipping or local pick up only. Tom

Moved

OP's IP address is for the Harker Heights, Texas, 76548 area. @Mandajane It is a good idea to add your location to your profile so you can reach people in the area that may be interested. Tom

I fixed the link to make it "clickable" Tom

@tieflyer You have some interest shown here. You haven't been online here since March 22. @StitcherToo If you quote or flag someone, they normally get an email so you will get faster response. Type "@" followed by the username and a list will pop up. Pick from the list. Tom

Hey @CowboyBob do you know anything about the Cowboy 8020 splitter? Looks like some interest in this thread. Tom

Copied and pasted into a browser, works for me. Tom