Luke Hatley

YOU ARE GETTING BETTER WITH EVERYTHING YOU DO........... FINE LOOKING OAK LEAVES...

DAGGRIM.........YES,... THOUGHT I WOULD CHANGE UP FOR '09. TROOPER GAVE YOU GOOD ADVICE ON GETTING THE LONG RIVETS, THESE WILL WORK FINE FOR YOU. ALSO THE DIAMETER OF THE RIVET POST IS MUCH SMALLER THAN THE SIZE 9'S.

not too familar with that machine, but it should have a walking foot. TRY BEFORE YOU BUY.

DAGGRIM, there are some very Small Copper rivet made that would look great on your Helments. sizes are 12s or 14s.........just a thought

i use size 69 thread on both machines ..... top and bottom. colors in this size i get at Hancocks or Hobby Lobby. small spools of Nylon Upholstry thread.

AFTER YOU PAINT THE PICTURE...........

YOU'LL GO FAR...............I LIKE IT....

PETERK.......CHECK OUT THE "FAUCET WASHERS" IN THE PLUMMING DEPT. SOME ARE BEVELED AND THERE ARE OTHERS THAT OR FLAT............

LOLLY.........ONE THING TO THINK ABOUT. THE OLD SADDLE WILL HAVE A LOT OF OIL IN THE LEATHER AND THERE IS A POSSIBILITY THAT THE VINAGROON DYE WILL NOT WORK ON THE OLD OILED LEATHER. FROM WHAT I HAVE READ AND DID, IT ONLY WORKS ON UN TREATED VEG TANNED LEATHER. HOPEFULLY CHUCK BURROWS WILL CHIME IN WITH MORE INFORMATION FOR YOU

I LIKE THE FASTERNS ,THATS USING YOUR HEAD............

I HAVE BEEN KNOWN TO CUT EITHER A "V GROVE" OR A" U GROVE" THEN WET AND FOLD.

YES WE WERE BOTH SURPRISED WHEN HE SAW THE CHAPS. HE ASKED ME HOW I GOT THEM. Along time ago i did some leather work for the Brother of the person that Harry made these Chaps for. He was well pleased with my work. At the same time i was just getting into the single action shooting(sass) And getting my outfit together. Richard saw that i need a pair of chaps. A few weeks later he came back to me with these chaps and said that i had been very helpful to him and he wanted me to have these chaps........ (i guess it's called Karma)... I told Harry today, i have finally have been able to afford some of his work.I will list them as Vintage on the Bay. and collect a lot of $$$$$$

WHAT WORKES FOR ME IS TO USE THE APPROIATE EDGER AND THEN USE "FIEBINGS EDGE DYE".

got a photo. it would help.

GREAT LOOKING SADDLE.. whad did you you use to put on as a final finish?

sorry to tell you that, you will need to punch the holes before you glue the holster together. or use a drill bit and drill stiching holes after you assembly the holster.

THEY LANDED RIGHT..............

RAYBAN.........MAKE A LOT OF KNIFE SHEATHS..........AND INVEST YOUR $$$$$ IN A ARTISAN 3000. YOU WILL BE BETTER OFF IN THE LONG RUN. WITH A CYLENDER ARM MACHINE YOU WILL BE ABLE TO DO DIFFERENT TYPES OF SEWING. IF YOU WANT TO INVEST MORE $$$$$$ CHECK OUT THE SEW-MO 205-370 IT IS A COPY OF AN ADLER. I HAVE HAD NO PROBLEMS WITH MINE AS LONG AS I HAVE HAD IT. ALMOST 6 YEARS.

LOOKS SHARP............

TANDY SELLS THE MYLAR LACE...SILVER AND GOLD.

RAYBAN.........I HATE TO TELL YOU THIS..... THAT IS A PATCH MACHINE. IF YOU CAN GET IT AND THE STAND FOR $200.00 OR LESS IT WOULD BE GREAT. THE MACHINE IS FOR LITE WEIGHT LEATHER. FOR PATCHES ON BIKER JACKETS & VEST IT WOULD BE A MACHINE TO HAVE...I M H O. SEW WITH IT BEFORE YOU BUY IT.

WOULD YOU HAPPEN TO HAVE SOME PHOTOS OF THIS ?

NICE TAT............GREAT LOOKING TOE NAILS BUT .................SHOULDN'T THE TAT BEEN PLACED ON THE LOWER PART OF YOUR BACK KINDA CLOSE TO THE WAIST LINE.....

''ALAFIA RIVER RENDEZVEOUS".....are you a BUCKSKINNER......HISTORICAL TRECKER... OR JUST VISITING. Not that it makes any difference to me, just glad to make contact. "SEE YOU ON THE GREEN"

that is some awsum work......LET'S SEE MORE OF IT. WELCOM TO A GREAT PLACE.