Jump to content

1961Mike

Members
 View Profile  See their activity

  • Content Count

    73

  • Joined

  • Last visited

Everything posted by 1961Mike

  1. 1961Mike
    Thanks, I see the difference now. Both look great by the way. I'm learning how to do the Serpentine tooling for a cowboy money belt and possibly for the holster also. I have Will Ghormley's Law Dog holster plans to work from. Later
  2. 1961Mike
    Hi Both are nice looking rigs. I have a question though. When I first looked at the thread, I "knew" that was a Threeperson's Holster. I don't see much difference between the Threeperson's rig and the Rhodesian rig. What's the difference? Tom Threeperson's designed the one named after him. Later
  3. 1961Mike
    Hi, While the idea has merit, I wonder if it would call attention to the area and give away your pistol. Most people go to their cell on the order of 100 times a day, and in doing that in front of your pistol, you're continuing to call attention to it. Just my $0.02
  4. 1961Mike
    Hi, On the sights, I've read that some people sew a couple of strips of leather on each side of the front sights on the inside of the holster for the front sight to slide down? Does that work well? Thanks
  5. 1961Mike
    HI Forester Chuck would have been proud and Kid Terico would have bought it. Later
  6. 1961Mike
    Hi, the cavalry holsters had the flap to keep the cylinder and percussion caps covered. Brass cartridges weren't common in the Civil War, and most handguns were still percussion. To state that gunflights portrayed in films were very rare is an understatement. Most shooters seemed to have the gun out and pointed your way when they asked for your money, or to surrender. Hope this helps.
  7. 1961Mike
    Hi, I would think you'd know this, but having bought a holster with Chicago screws that fell out, I'll be on the safe side. Use the Loctite that's the easiest to get unscrewed. I'd use the blue stuff. I had a holster dump three screws in the grass when I tried it on. Threadlockers Later
  8. 1961Mike
    Hi Kris, that's called a Keeper. Many modern cowboy action belts have them, but they weren't used back in the Old West. Great looking belt by the way. It's obviously not styled like an Old West cartridge belt and holster, but it's not a buscadero belt at least. You do really good work. Later
  9. 1961Mike
    Hi I like both Resolene and Tan Kote, I did some experimenting with those and Bag Kote. I don't know about the durability of any of the three, but the Bag Kote looks a little better and isn't shiny like Tan Kote. Resolene is good, but I put on 3-4 light coats before I decided I was done. Later
  10. 1961Mike
    Hi, well executed and beautifully done. Not my style though. I'd put that on and 30 minutes later there would be 2 oil stains and a ketchup stain. Later
  11. 1961Mike
    That looks great. I'm curious as to WHY? I've never even thought of wearing a rig that way. Horseback? Later Mike
  12. 1961Mike
    Hi, I always had a lot of trouble with either Kidney or Appendix carry in the car. I had a 2007 Subaru and I couldn't have shot a car jacker on a bet. With a Kidney Carry, the 1911 was behind the seat belt and between me and the seat. I also have just enough gut to make Appendix carry annoying. I ended up with a Shoulder holster for in the car. I also swapped to a itty bitty Beretta for carrying in a pocket. Just my $0.02
  13. 1961Mike
    HI, Back in the late 1990's, I made a collar for a 3 year old Husky named Seminole. He got it Xmas day and had digested it by New Years. Not really sure how he got to it. Later Mike in Norman OK
  14. 1961Mike
    Hi I generally use a layer of 2-3 ounce leather for the liner and one for the outside, using he thicker stuff for the welt. Just my $0.02.
  15. 1961Mike
    Thanks, that's a pretty good idea. I've also read, but not tried, using rubber cement to glue the leather to a cutting board or other board to do the tooling. Later Mike
  16. 1961Mike
    Hi again You can't exactly cut a silhouette of the blade because many blades (most I've dealt with) are wider at the point end than at the handle, or curve somewhat. You have to allow room for the curve etc. I can't remember where I found this out, but it works great. AFTER YOU PUT A FINISH ON THE LEATHER, glue everything together with rubber cement. You can try the fit, tear the sheath apart, and cut some off the welt, replace with a bigger one etc. Later Mike
  17. 1961Mike
    Hi Chief For 1. I died a piece of Veg Tanned Tandy Leather with Light Brown Feiblings die. The die was a little (VERY LITTLE) bit uneven. I spit on the leather and rubbed it. The leather went about 2 shades darker. From then on, I use Distilled water to wet mold anything. 3. I always run the welt up to the top of the sheath because you're drawing the knife all of the way to the top. Later
  18. 1961Mike
    Hi Speaking from bad experience, keeping the pumch perpendicular is harder than it looks. I used a 3/32 drill in a drill press and at least the wholes are straight now. I was sewing with waxed thread, not lace. Later Mike
  19. 1961Mike
    Hi I'm making a Native American sheath for a butcher knife like that in Kozlov's book "Plains Indian Knife Sheaths: Materials, Design, and Construction. I actually put a triple layer of welt at the top of the sheath. The sheath covers over half of the knife handle. I'm not done yet so who knows if it will work or not. Later Mike
  20. 1961Mike
    Hi I emailed Pecard's. They recommended using their Classic Leather Dressing. I also used Gum Tragacanth on the edge It looks pretty much like it did when I bought it now. Later Mike Norman OK
  21. 1961Mike
    Hi I've made a few belts and a holster, but I'm a real newbie in most ways. I just bought a plain leather tool belt with electrician's pouch. How can I protect the leather without making it soft? I don't know if it is chrome tanned or what. Klein tools if that helps. The package didn't say. Thanks Mike Norman OK
×
×
  • Create New...