Jump to content

tonyc1

Members
 View Profile  See their activity

  • Content Count

    989

  • Joined

  • Last visited

Everything posted by tonyc1

  1. tonyc1
    My strap cutter is the same as this one. Instead of being hand cranked it has had a motor put on it to save labour. Tony.
  2. tonyc1
    Baling twine has a multitude of uses, just like fencing wire!!! Tony.
  3. tonyc1
    I still roll a few threads for some applications. Tony.
  4. tonyc1
    Well, Wiz, mine has the wheel on the front of the machine and I don't think it is an antique like some are using. Perhaps Singer made some for south of the equator and some for the north! What do you classify as modern? Tony.
  5. tonyc1
    I've never used an Adler patcher, but I have a Singer and the hand wheel must turn clockwise to operate. Tony.
  6. tonyc1
    The needle looks correct to me. Tony.
  7. tonyc1
    Many thanks, Mark. Tony.
  8. tonyc1
    Mark, where did you get the Square Eye stainless snaps from? Tony.
  9. tonyc1
    I use a Singer patcher and the Eye of the needle and the long groove of the needle need to face left of the machine. It doesn't look as if that is the way you have your needle inserted. Tony.
  10. tonyc1
    Marlon, I think it's called "Time"! Tony.
  11. tonyc1
    It's nice to have another Taswegian here, Bernie. Tony.
  12. tonyc1
    Very nice belt! Tony.
  13. tonyc1
    Buy a drive punch of the appropriate size. It will make the job much easier! Tony.
  14. tonyc1
    Luke, I have used a P6 for years and years and they are pretty reliable! Tony.
  15. tonyc1
    I just reverse my blade and screw it down tight again and go from there. Tony.
  16. tonyc1
    What are you using as a base under the leather to punch into? You need a good solid base. I use a two and a half inch by nine inch piece of lead and I can usually punch through in 1 hit. Tony
  17. tonyc1
    As far as I know, we do not celebrate Halloween here in Australia. Tony.
  18. tonyc1
    For the past 25 years I've always used Break-Free on the surface of any metal and firearms and it has prevented any surface rust on my gear. Tony.
  19. tonyc1
    I reckon that's a pretty good job! Tony.
  20. tonyc1
    You wont like hand stitching harness traces 5/8" to 3/4" thick then. Tony.
  21. tonyc1
    You can probably get a helper from China these days too! Tony.
  22. tonyc1
    What do we have to do to view them? Tony.
  23. tonyc1
    I'm just a tad over 6 feet and my main work bench table height is 3' 4" off the floor. I like the height as I don't have to bend over very often. Tony.
  24. tonyc1
    I'll second that. Someone I know from this state has lost his wife and is himself in hospital. He took his wife on a holiday to celebrate her 50th. and something terrible like that happens. Tony.
  25. tonyc1
    According to their catalogue, Leffler's have 3, 6, 12 and 25mm neoprene! Tony.
×
×
  • Create New...