Jump to content

Fire88

Members
 View Profile  See their activity

  • Content Count

    451

  • Joined

  • Last visited

Everything posted by Fire88

  1. Fire88
    Thank You, you’ll see some more got a couple guys requesting some. Thanks
  2. Fire88
    Thank you it was definitely a fun test of my abilities, as i'm still new to tooling.
  3. Fire88
    This was my first commissioned piece
  4. Fire88
    Looks good, where did you get the canvas at?
  5. Fire88
    I could add a holder for those but it’s generally frowned upon to mix the two. Thank you, it just came to me as I was assembling the first one that I now needed to make another belt and not everyone would want to do that.
  6. Fire88
    Yes rivets each end and sewn with 138 thread, I’ll try 207 ok the next one that’s in the works
  7. Fire88
    Thank You Thank you It’s 5/6oz Herman Oak
  8. Fire88
    Worked out a pattern for 12ga shotshell pouch, made a second back piece that snaps over the belt your wearing. No tooling in these as I was building to check the patterns and for samples.
  9. Fire88
    very sharp bag
  10. Fire88
    Another beautiful piece from you
  11. Fire88
    Beautiful bag and will definitely garner attention
  12. Fire88
    Both are tremendous pieces are work
  13. Fire88
    Beautiful slings
  14. Fire88
    Nicely done as classy
  15. Fire88
    Very clean work
  16. Fire88
    Looks really sharp!
  17. Fire88
    Try it on some scrap first but yes it shouldnt be a problem.
  18. Fire88
    How’d it come out?
  19. Fire88
    Looks very nice
  20. Fire88
    I got some 5/6 laying around and it seemed too light, I’ll make another just cause before this one ever falls apart. The outside dye is chocolate a couple coats cause I dilute it, basketweave is one light coat of diluted chocolate with dark brown antique, bag-kote as the resist and final finish. Than You Sir
  21. Fire88
    Went from seeing a picture through 3patterns 1 prototype to this. Made from 8/9oz leather sewn with 207 white thread which I thick makes it pop.
  22. Fire88
    Looks good !
  23. Fire88
    No got a little over zealous with the edge dye, and it’s only a light coat of walnut dye on the main leather.
  24. Fire88
    Thank you and absolutely easiest way to show others. I have corner chisels I got from Springfield leather 10,20,30mm or something like that. I cut almost everything square and then use them to nip the corners before sewing. Thanks, there are mistakes in the square stamp somewhere but I fixed most of them with a modeling tool. That square stamp is easy to screw up.
  25. Fire88
    Welcome, I pulled the one off my helmet since it’s good and traced it on graph paper. This gave me the basic outline and then tweaked it from there. I haven’t made it yet, need to find my pattern or make another one.
×
×
  • Create New...