BlackDragon

You know, I didnt realize I dont small leather any more. Now I'm sad

I used blue tape and never have a issue with it not sticking. I put it on before casing the leather.

I worried about the thickness when I was designing it then I remembered it was going into a purse or handbag so I wasn't to worried about it. My sister gave it to her coworker at her goodbye party and she loved it. I left a couple business cards inside and a few of the ladies wanted my information to commission purses. Hopefully those will pan out

Great advice, I really appreciate the feedback.

Nice!

Wellwood and Barge both work great. Amazon sells both for about a dollar difference for a quart. Use both in a well ventilated area

Nope, I tooled it.

I made a business card holder for my sister's coworker. The coworker is leaving to continue her career with another company. I used 5oz vegtan with olive oil for the cover. 2oz vegtan for the lining (no die), pockets and strap (Fiebings Russel brown). Ritza Tiger thread 0.6mm mid brown.

Can you make a wooden skeleton for the interior then wrap it with leather? A wooden ring on the top and bottom with two pieces of wood to create the dividers

The hole next to the dome I use for setting the burr on short rivets and the hole on the side I use for longer rivets. I don't know if it's the correct way but it works for me. Edit: Now that I think about it more I could just use the front hole to start the burr then cut it down the rivet so I can drive the burr further.

I didn't even think about stretching thanks for mentioning it. I'll keep an eye on it.

I leave near Camp Lajeune

I had a spare seat for my bike sitting around. I also have some brown embossed alligator chrometan and purple vegtan that I acquired a few months back. So I wanted to see what I could create and came up with this.

Ok the issue wasnt the bottom pulley after all. When I was putting the machine together the youtube video I was watching had the pulley backwards like in the top picture. Watching the video that came with the machine (which I've seen on youtube before) had the pulley flipped around. I put the bottom pulley back where the manufacturer set it. Now everything looks like it's running as it should.

Thanks! I appreciate the help. I'll get everything aligned tomorrow and give it a go.

It's been 2 months and I finally brought home my Class 4 from Zack White's. I'm in the midst of setting it up but I noticed that the bottom pulley is at a slight angle. Is this normal or should I adjust the pulley height?

Wow looks good. Looks similar to one I'm making for my sister's MIL.

There a LOT of types of leather. It's like asking how many types of cars are there. Best thing to do is start with finding out what you would like to make out of leather and we can go from there.

At the 5 min mark he's using the "poly stripe" as an extention for the card pockets. Just extend the leather instead of creating a glued failure point.

Welcome from NC!

Welcome from NC

Thanks this helped me out when the electrician came out today.

Great! Thanks

I'm still waiting for my cobra and was wondering what are it's power needs. I'm having an electrician coming in the morning to do a few power upgrades and it came to mind that I was assuming the Class 4 ran on 110v 20amp. Is this the case or does it need 220v? Does it need a dedicated circuit or can I plug in to existing outlets without it tripping a breaker? I'm already installing a 220v 20amp outlet for my skiver and a dedicated 110v 20amp for a window a/c so adding another dedicated 110v isnt going to be a big issue.

And chocolates... girls love that romantic stuff.