Hags

I recently ran an add on craigslist and found 10# of mixed bird shot for $2 a lb. I plan on using it to make weights, but a sap may be cool. I just didn't want a 25# bag of it and dont reload anymore. Very pretty, much more like the ones I remember the police carrying in the 60s and 70s.

I use a lot of copper rivets. I also use the three punch set from buckleguy.com ($56.93) so I have all the tools I need. I mostly cut the rivet 2-3mm and use the round over punch. I use #12 rivets, be sure your tools match your rivets. I love copper rivets because my customers love the look!

Pretty nice.

Another welcome from the upper left coast! Google Sequim Washington and you'll see what I mean.

WAG here is 4/5 oz veg tan dyed black kn one side. Pretty easy to do.

Welcome! Plenty of info here.

Welcome!

Very well done!

You are welcome and glad it's resolved!

Very, very nice. Maybe when I grow up.

I used to shoot IDPA. This beyond me. Very nice work.

Thank you, and no, it's a leather point. May be the lighting. Still want to try 277 again.

I found an Emerson Electric Manufacturing co motor with Sears and roebuck 1/2 in arbors on it for $20 at a garage sale. It had a wire brush and buffer wheel on it. So quiet, plenty powerfull, lots of torque for an old motor. Ran an add on next door for a wood Turner and got a pretty decent burnisher with 5/8, 1/2, and so on done in maple for a $40 donation to a local charity. 1750 rpm, works fine.

207 and a #23 needle. I'm going to try 277 with the same size needle. According to the chart I'm one under now? I also changed vendors for my thread. I like this thread better as it has a firmer texture, but maybe that makes it just a tad thinner as well? Ths 277 from this vendor may work with a 23, the last thread didn't like it at all.

Nicely done Chuck!

Had a return customer ask me to make him another chest rig in "natural" leather with no stain. I built a chest holster (ideas for a better name would be appreciated) for his baby desert eagle in 45 acp. He carries this when he and his wife are out rock houding and is concerned about snakes. Natural doesn't hide a lot of mistakes.. and yes, I like the chest rigs. They pay for a lot of leather and it is a great hobby for a retired guy.

Thanks. I'd never seen one like that either. I've bui.t a couple of holsers for him and was flattered he brought this to me.

I think they look pretty sharp! I'm a lefty that shoots right. Left handed holsters make me think too much. Check out the holster forum!

Try photo puma, free and very easy.

That is most likely a tube rivet. There is a hole in the middle and the rivet spreads outward. Look them up, you'll see them, very common. I have to agree with a post on the other thread thoug. I feel a copper rivet would serve better.

I think it looks pretty good. There will always be room for improvement. And trying new materials is always a learning experience.

I bought one of the newer Bianchi strap cutters thinking it would be greatest thing. It. Was marginally better than my cheap tandy wooden one, but I wish I'd have bought another wooden one of higher quality. The pistol grip is not that ergonomic for me and you cant adjust for thickness.

There is also Maine thread. I've been using it for quite a while and like it. For light stuff, .020 For holsters etc, .040

Very nice Chuck. She's going love it.

I use Chicago screws for the attachment points on my chest rig holsters with purple loctite. Snug, but moveable.