Frodo

Japanese members or anyone that is in japan. I found an old Japanese holster from ww2, and the closure on it is crazy cool. I can not find anything like it here in the states I am wondering if you perhaps have this hardware item locally? A brass backing plate for a sam browne, CRAZY COOL, I want 100 of them

contact number booger bears mother

9oz leather, i am packing corn, it falls out when you are done. yes, i have a gap or 2. those pieces are not finished going through the line. i catch the bs on the next step. every hole gets an awl stuck in it then it will be glued, then sanded and edged then sewn whew... i gotta get busy !!!

before you say anything. Cause I know you guys do not MISS anything. I am well aware that I did not stamp the edge of the dragon scales this is where it will be formed and the edge will not be seen...Thats my story and I am sticking to it.

Man, don't you just love the smell of beeswax? YUMMY

A friend has set up her laser printer. If you would like stamps contact me for her info here is some of her work

Busy busy busy the order has grown from 10 to 20.. FYI, you can make 10 bags out of 1- 10' D shoulder

I have sold 2 already and am not at the show yet lol

3 masks, I took these pictures before i finished the eyes on 2 of them the yellow mask has green eyes and the green mask has yellow eyes

YEAH!! what he said !!

here is a small simple project that maybe some of he new guys can benefit from, Are you a tradesman? Do you work with tools everyday? This is a tool sleeve that fits in your back pocket. It protects your jeans from getting rippled 3 pictures. one is the sleeve inside a pair of jeans, the others are the sleeve

I use a triple hydrometer in another hobby of mine and found out rather quickly that an acrylic hydrometer will fall apart in front of your eyes and a glass one will not

LOL I never even knew it was off till I heard it on the news..

Thanks, i did actually spend a few hows in that rabbit hole. Beer and wine are OK IF They are in the bag for the day, not to be stored in the bag hard booze is out, you can not put it in he bag. As far as I can tell. no research has been done, that I can find on the hard booze, I have made one bag And picked up a commission to make 10 for a vendor at a renaissance festival Raw bag,, not dyd or treated

Bounce some ideas off of me Here is what i have. A BEAUTIFUL piece of what looks like elk suede a rust color size is aprox 18'''' by 30'' I am leaning towards a retro 60's look purse.. folds over with no clasp and a lot of fringe [hippi style]

I really like freds suggestion. I am going down a rabbit hole looking for small key eschtions I think the size that would fit a music box or such as that The image I posted is a WW2 japenese nambu #14 clam holster... If anyone is interested in the holster holler

I saw something on a vintage Japanese holster and i want a bag full Has anyone seen these and if so where can I get them?

Yeah, I found the scrappy scraps. they smell good.

Chromium-vanadium steel(Cr-V) It has better strength and toughness than carbon steel, so it is a great material for high quality tools. Commonly used for wrenches, screwdrivers, manual sleeves generally use 50BV30 chrome vanadium steel.

Makita, Snaps...oh how I hate them. some times you have to skive out a little dish if they are to short and sometimes you have to add a thin piece of leather. And i have found if the post is to llong, the post can be shortened using a dremel with a sand paper attachment.

I have asked for help in the past and others have been kind enough to help me out so here is a pattern for any of you that piddly in your garage resize to a width of a 5 1/2'' 1x6 board have fun

thanks for the reply Tom. If you can pull this off you will be my hero. Yes i have a picture of a drawing here it is height of the oval is 48'' width is 24''' This is going to be 3-- 5 1/6 sheets of steel, with the writing on the 1st and 3rd sheet. the center sheet will not be cut out. outer sheets powder coat black center sheet powder coat blue NOTE. the width may have to change to accommodate the width of the lettering/this is understood

Looking for someone that knows their way around a DXF file I need someone who can convert a drawing to a DXF file

I Think I might change my strategy Ever hear of food grade epoxy? same stuff i made my beer mug out of

I have plenty of pine trees out back. I will use the pine resin with nothing added except maybe a bug or 2 From my research you can indeed carry spirits in these. You can not store spirits in them {Or so I am told} SO, Drink up me mates. We can not let this rum sit in here all day. we must do our best to empty this jug