Jump to content

CowboyBob

Contributing Member
 View Profile  See their activity

  • Content Count

    3,205

  • Joined

  • Last visited

Everything posted by CowboyBob

  1. CowboyBob
    Here's the bobbin.
  2. CowboyBob
    Ok,I'm @ the shop & have this file on this computer.
  3. CowboyBob
    Try looking on youtube,also search for Consew 225,226,255 & Juki 562,563 they are all the same.
  4. CowboyBob
    What is the model # of the machine your looking at?
  5. CowboyBob
    They just screw on and can be put on the otherside too.
  6. CowboyBob
    Yes, those are the parts you need to change.You could just trade them from your 563 since it doesn't have reverse.You can also use the 563 hook saddle then you don't have to mill it to make it work.
  7. CowboyBob
    It would of been easier to flip the lower plate & it would put the pedals toward(no drilling & you can use the same pedals) the back.Also when working on the table like this I would recommend taking the head off the stand,one little mistake & you might have to pick it up off the floor & hopefully it wouldn't land on a toe.
  8. CowboyBob
    What I should of written was...This is a great board with a lot of knowledge on it.It is supported by the people paying for the banner ads @ the top of this forum & I feel it's always best to support them when possible. Thanks & have a nice day!
  9. CowboyBob
    We had an inmate from Texas send us an order for a CB3200 handcrank so we made him one. Handcrank CB3200.MOV
  10. CowboyBob
    Ebay is your friend if you want options for sourcing sewing related items like bobbins and such. Some folks are more comfortable with a phone call, and buying things without ever seeing them. Maybe I should send people to Ebay when they ask me questions too??
  11. CowboyBob
    We used to do a lot of them mainly 226R & Juki 562 that had reverse.We would charge $400.00 for parts & labor.The lower shaft has to be pulled out & take the hook saddle out & then mill it for the larger hook & put it back together.You also need to change the take-up lever to a longer one.
  12. CowboyBob
    The point of the shuttle should be @ the needle when the needle rises about 3/16",make sure you turn the machine in the direction it runs.
  13. CowboyBob
    Ok,now you want to turn the machine ( the handwheel) towards you & when the needle gets all the way down & right as it starts to go up the shuttle also does the same, it goes all the way back & should start to come forward @ the same time the needle goes up,check & see if this is happening?
  14. CowboyBob
    Did you change the needle?If so double check that it is pushed all the way up.
  15. CowboyBob
    What is going on that you think you need to work on it?
  16. CowboyBob
    This site has a classified that you can advertise in,I see machines are marked sold after while so it must work. HTH
  17. CowboyBob
    This are more parts available for the 133 than the 45,if that helps any?
  18. CowboyBob
    We have some 207
  19. CowboyBob
    Ok ,just thought I'd chime in here & let you know we are used to talking with hobbiest type of people & even first time Industrial sewing machine owners so just have a list of questions ready when you call & we'll try to answer them the best we can.
  20. CowboyBob
    You can put a Singer pressure bar(or GA-5) on the Adler.
  21. CowboyBob
    I'm sure Proleptic.net will have your manual.
  22. CowboyBob
    Yes,it looks our model CB3200 http://www.tolindsewmach.com/cb3200.html
  23. CowboyBob
    We have sold quite a few of them over the years & probably should add them to our website.We do oil & test them before we ship them unlike a place that says shipped from warehouse (untested drop-ship) They will use #69 & #92 thread.Yes,a great way to get started. The downside is the teeth on both the outside foot & lower feed dog that can leave marks.
  24. CowboyBob
    It's 17/64 with 24 tpi
  25. CowboyBob
    Weight depends on which motor ,I'll guess it's a clutchmotor,real close to 200Lbs,if they ship it truck freight w/pallet it's 250.
×
×
  • Create New...