chuck123wapati

Its a great bike friend no matter what you have read on the net. Made by Huffy for coast to coast, BTW Sears didn't make bikes either they rebranded. ITs pretty much the Huffy Timberline bike. It didn't have a weeks worth of wear on the pedals, perfectly tuned. Out of pocket for tires tubes, a seat about 65 bucks, the rack is worth that alone. As i said i got it out of the dump. I have been riding, fixing and restoring bikes for years. I could sell this cruiser in a college town easily or any three speed enthusiast https://societyofthreespeeds.wordpress.com/ . But its mine i ride it daily along with my 77 azuki 10 speed. Have you ever ridden a vintage bike? Its not about what other folks have that matters in life its about the joy of riding. Believe me its much better than any modern Chinese built wally mart bike.

that is a nice set and would work well i'm sure. Yes i use a few different grits of sandpapers spray glued down to my pounding granite after the stones to get a good polished and fine edge. Usually double down meaning form say 400 to 800 then 1600 etc. down to my 2500.

if your cutting tools are not a super hard steel then the Arkansas will work fine. if they are of a super hard steel then you will need diamond stones. Arkansas are great with oil, water can be used also. There are also Japanese type water stones that are awesome as well. Its mainly a matter of preference on oil or water. You should get a set of three at the least course medium and fine actual grit size doesn't matter because you will go beyond that when finish polishing i use various sandpapers for the finish sharpening and polish down to 2500 grit. Some folks go farther with the polishing compounds. The course should get used very little as it for creating the primary bevel, and fixing a badly worn blade or chipped blade the medium can be used for cutting the secondary bevel and removing the larger scratches on the primary and then the fine for the finishing the edges. After the edge is created then up keep is with your sandpapers and strop if that is what you prefer. BTW the stone in the pic on the left is worn out! the one on the right can be fixed but sharpening with stones this bad will not be helpful in learning to sharpen anything. Keep your stones clean and flat by using the whole stone or as much as possible when sharpening and keep it clean with whichever lube you picked Water /oil

beautiful! those nice polished bevels do their share for a nice smooth cut as well, makes the blade slide along without grabbing.

the wide angle wont ever get super sharp like a knife so if that's what your trying for it wont happen but it will get "sharp" in swivel knife terms. it only has to cut the leather about halfway through which is why the angle is like it is. I test mine by trying to bevel the edge of a piece of leather if it will trim a bevel it is sharp.

lol There is so much info in his books, i go to them first when looking for answers and usually find them.

really nice work all around.

yup taller is better IMO.

A spoon type works best for me. in fact you can use it to give your critters some shape too. I made mine out of stainless steel all thread, made some lifters and a regular blunt point for tracing and such also.

awesome original work for sure. I like it and the 92.

there is alot of good info on the net. look up Brain tanning or just hide tanning. Basically you have to flesh/scrape the flesh side of the skin free of all meat and fat . then wash and soak the hide in a water and lye solution to get the hair to slip then you have to wash the hide again to get the lye out and scrape the hair and epidermis off and then apply what ever tanning solution you choose the skin then needs to be worked as it dries to break down the fibers and soften the leather, this last step is for brain tanning i haven't done any other type. there are more than one way to accomplish each of the different steps so a bit of study is needed to pick which you want to do. If you want leather to tool you will have to veg tan it. Brain tanned hide like Deer is really soft and makes awesome clothing. Its all hard work lol and some times stinky.

Hey all you folks down in Texas hope you are doing well also Frodo and friends in that flood / Hurricane Ida area. Haven't heard from Frodo i hope all is well. I am always looking for preparedness things easy and cheap, it may not flood to much here but the power does go out and in the winter can be deadly as well. So i found another great thing to have on hand in emergencies, outdoor solar lights, they will go next to my Colemans and kerosene lamps lol. I was just at walmart and found that the outdoor solar lights were on end of summer sale, i picked up a few of them for emergency use for just $5 a piece. The larger spot light ones are great you can use them as house lighting or flashlights they are very bright and they have a solar charger built right on top. Even rig them to charge other things as well if you are smarter than me lol.

and possibly a modeling tool for the real tight spots.

i use fiebings golden mink oil water proofing on most of my holsters and sheaths after a small touch of NFO. It darkens the leather a bit however. Smear it on and use a hair dryer to soak it in then buff it. Haven't had a problem with spotting yet.

just went to a local store Bomgaars to buy some stuff. they overcharged me according to the price on the shelf. The gal there fixed it but we got to talking as it happens on almost everything i buy there now. She said there just aren't enough people applying to work to even unload the truck let alone repricing everything. Almost every place in my town is crying for help for the same reason so that's probably happening most everywhere. Jeez i wonder why no one wants to work when they are getting free money can someone fill me in?

lol i have to use both for the small stuff

Both are very good work, i'll bet you will be making more once those get around a bit.

thank you!

excellent basket weave and an awesome little piece of iron.

traditionally they used horse hide i believe. yes just use the paper dry

Nope I don't strop my knives, none of them, hunting fishing butchering, leather or wood carving and i dont use a straight razor for shaving lol I use the 2000 grit for leather and my wood chisels and a butchers steel for butchering and the rest. i actually use a 2000 grit oiled belt on my sander for my finished edges on the knives i make. Here's my take for what its worth. Polishing compound that you use on a strop is for polishing, i use a lot of it in making knives so i am well aware of its use and also how long it takes to polish tempered steel. Stropping with it is like pissin into the wind IMO just to fine to do any real good because the steel is tempered so polishing is not easy and yet not hard enough like a straight razors steel to prevent rolling the edge, as well during stropping you can see the leather roll up from under the blade if you look closely that will make a good straight edge convex in short order as the leather pushes up around the edge. I use the 2000 grit it works well and much quicker to replace the edge that leather takes off, veg tan is hard on edges for sure, being glued on my pounding board it just takes a few strokes, wont round the edge and is handy right there. i have found there is a curve for sharpness that a cutting tool has to fit, to sharp for the job and it dulls quickly to dull and it doesn't cut, all cutting tools fit in that curve but axes don't fit the same place as leather tools or kitchen knives in that curve each needs it own edge, edge angle, edge grind etc.to meet its potential. As for the leather type if i was to make a strop it would be with the right stuff not whatever is laying around or you may be doing more harm than good IMO. Either way you decide to go what is important is that you learn the art of sharpening and learn your own tried and tested techniques because there have been pages and pages of sharpening opinions posted here as well as online. You know the old saying about opinions lol same with sharpening. All i know is what works for me. good luck and god bless.

I use a simple piece of 2000 grit sandpaper spray glued on my pounding stone to keep up the edge. No flex no mess and much easier and cheaper. To soft and the flex of the leather will round off your edge. Use the hardest leather you can find if you want to make one i hear horse hide fits the bill best.

That is amazing, portraits are hard especially when they are of people everyone knows.

excellent work !

air brush it.