dikman

Always difficult to put a price on sewing machines, depends on the condition, demand for that particular model, how many others there are out there, how badly he wants to sell it etc. If you search gumtree for 132k6 there's a few on there. All you can do is check it out, get him to demo it and feel him out pricewise. I would consider $1500 to be at the top end myself (I've seen some at $1200 in the past). Don't let him make out that having the servo is a reason for bumping the price, like I said before you can get one off ebay (Aust) for around $100 which will be more than adequate. As for leather, no worries, it will likely do most things short of holsters and harnesses!

It's been up for three weeks, I see. Being out in the sticks (), as in not near Melbourne, probably reduces his selling opportunities a bit so he might be open to offers?

If you're only looking at a max (seam) thickness of 7-8mm then any of the upholstery-class machines should do, they generally have about 10mm under the feet (some will do 12mm) and can usually manage #138/M20 thread. Singer 111/211, Juki 562/563, Consew, Seiko, Pfaff, Adler are all older machines that you might pick up at reasonable prices (well, maybe not Adler so much). Just search for "industrial sewing machines" on gumtree, where you are gives you reasonable access down to Melbourne and the suburbs so you've got a pretty good chance of finding something, just keep looking. If you see something and aren't sure just ask on here. Buying new is nice but bloody expensive here in Oz, particularly if it's only for occasional/part-time use. Bert, I reckon you're right about the glue. Edit: I just had a quick look at gumtree and saw at least 3 132k6's in Vic, one of them is at Echuca (!) but he wants $1750 for it, which I think is a bit on the high side myself. It does have a servo, but servo's are pretty cheap on ebay ($100 - $120).

Where in Oz are you? Gumtree often has a lot of industrial machines listed, not all of which are reasonably priced!! Just how thick, in mm, is the thickest seam likely to be? If the bags are heavy duty, what thickness thread are you looking at using?

Me too!

Easiest way is to post a good closeup of your thread path and someone will be able to tell you if it's right. Thicko?

Don't you just love it when a plan comes together?

I found this, which might help - www.manualslib.com/manual/461569/Duerkopp-Adler-69.html#manual but I can't find the German one again. I think it downloaded on my other computer so I'll have a look later.

I really don't see the point of an NPS on a heavy duty stitcher, particularly if it's likely to be used slow on leather. Just my thoughts. Road travel, sure, if you make a decent protected, heavily padded place for it but that would likely mean removing the head for travel and some of these bigger machines are HEAVY!

The feet look a bit like my Pfaff binder feet. On the controller box the bottom button looks like it has a turtle and a hare on it (?) which would suggest speed control. My guess for the others would be P to access various parameters and +/- to change the values? It'll probably be trial-and-error to find out what the settings do. If you start messing with it write down any values before changing them because some will refer to the NPS it's got fitted. Overall it doesn't look too bad, decent table and servo.

That article is written by someone who has no idea what they're talking about! What I would call mis-information.

Your last photo shows how the table was used, good stuff, I couldn't quite work it out from the first one. There's something nice about those old cast iron table supports.

The tabletop certainly has some character! Looks good to me. I'm still not convinced that the motor is original equipment or would have had a step pulley fitted, I think they just used the pulley that lined up best with how the motor fitted. Still, you've got a 155 and an interesting project with that stand.

I found a manual for that number you quoted but it's in German and so is unintelligible to me! It sort of looks like it's equivalent to a Pfaff 335 to me and can indeed be fitted with a binding attachment.

I had to look up a Vito, the van should make it easy but still take the head off, it's never a good idea to transport a sewing machine with the head on the table. When someone's getting out of the game there's always a possibility of picking up some nice "extras". I think Wiz meant getting someone (a piano mover) to move it upstairs for you? If SIL is giving you a hand, however, you shouldn't have any problems - get him to carry it upstairs!

Interesting stand, appears to be made from pressed steel and welded, whereas the old Singers were cast and bolted together. My 51W59 stand was pressed (heavy) steel but was still bolted together, not welded. I had a similar pulley stack/clutch on one of my machines but I ditched it for a servo motor. The original motor, in my case a Singer, was very old and so was all the wiring and I considered it a safety hazard! I doubt if the motor's original or that it came with a step pulley, my Singer motor didn't, you just adjusted the motor position if changing speeds. The timber top looks solid and it might be worth sanding/cleaning it.

Definitely start a new topic. Nice machine ,btw, so clean!

Unfortunately there's only one of me and I'm not exactly built like Arnie!

Oh yes, the table......every used machine I've bought I took the head off the table and like Bert said wedged it carefully so it couldn't move, then I dismantled the table completely to get it in the car and make it manageable. The biggest pain was always the clutch motor!!

Generally there's four bolts holding it to the table, remove those and lift the whole thing off (after disconnecting any lifters, of course). As for lifting it there's a pretty good chance that you can, my 335 is no problem to move.

So you drove in and back with no problems?

Andreica's main problem, Silverd, is that where she's located she doesn't have access to the choice of machines like we have, which is why she's looking at the two Pfaffs, they are convenient to her and the prices are, hopefully, reasonable. Many of the models that we often suggest as a good starting point are simply not available to her.

Definitely doesn't look like a girl in the photos I've seen!

I knew that! I was just being facetious.

Ah, but Superlube has Syncolon!!