Jump to content

Burkhardt

Members
 View Profile  See their activity

  • Posts

    434

  • Joined

  • Last visited

Everything posted by Burkhardt

  1. Burkhardt

    Ammo pouch

    Burkhardt replied to yuma's topic in Show Off!!

    So are you saying he should have stitched all the way around in the groove lines or in between the stitching groove and the edge run a beader?
  2. Burkhardt
    IIRC you started on a flat bed, how do like going to a cylinder arm with better access to sew different things?
  3. Burkhardt
    I expected by the time I got this far into the thread that Frodo would have had a insane story or video. @Littlef look forward to seeing the carrier when done.
  4. Burkhardt
    So is that a specific binding attachment for a 441 or a universal one you made work?
  5. Burkhardt
    Now I'm really confused because the spelling didn't look right but I see it both ways or is it one of those that can be spelled either way?
  6. Burkhardt
    That is cool as hell.
  7. Burkhardt
  8. Burkhardt
    You should sell "A day with Frodo", The experience one could get following you around for a day would be priceless.
  9. Burkhardt

    Vest advice

    Burkhardt replied to Boicie's topic in Help Wanted

    Tag him @Boicie so they get a notification.
  10. Burkhardt
    You didn't say if they were pricking irons, diamond hole or chisel irons. Unless they are chisels which I doubt, the irons pierce a hole and for the most part don't leave a big hole by design so the stitch/thread is tight in the hole and not loose. Glue it up, punch the holes and run a awl through to temporarily make/stretch the hole bigger to get the needle through.
  11. Burkhardt
    My guess is it's how you're cutting it and it's unavoidable. Strap cutters the leathers pulled straight through a vertical blade vs. pressing down and pushing or pulling a blade on the straight edge and the leathers stretching and getting it offline. I gave up on trying to get it straight and now use a straight edge and a pencil then cut the line instead of trying to cut against a straight edge.
  12. Burkhardt
    Did the leather dry out at all?
  13. Burkhardt
    Good podcast you did with Don Gonzales, listened to the one he did with Barry King right before yours.
  14. Burkhardt
    First things first, turn off what ever you have set on your lettering and please use some punctuation, I can't tell what's a question and where one starts or ends.
  15. Burkhardt
    Depends on what you're looking for, floral or geometric? I'm hoping to do shortly a review on a bunch of stamps I got from OKA tools from Japan. I looked at Sozo a lot and price wise the same as BK but I'm trusting the quality, reputation and resale value of BK. Do I own some BK tools, a few. A lot, no can't afford them but the bevelers and a couple others are ones you use every time you tool made sense to spend the money.
  16. Burkhardt
    Putting your location in your profile will help for future questions. And if you are willing to spend money for expensive leather I'd suggest buying some cheaper leather to make a practice one. You would have a tough time finding anyone on here that did a first anything without a lot of mistakes.
  17. Burkhardt
    Nice repurpose.
  18. Burkhardt
    Looks nice, is the paw stamp from OKA?
  19. Burkhardt
    I just checked mine to be sure and your timing is off almost 180 degrees. It's not hard to time but so you get the best explained instructions from @Wizcrafts, @CowboyBob
  20. Burkhardt
    Did you just buy it, new or used?
  21. Burkhardt
    Looks simple and cleanly done, if only everything turned out like that.
  22. Burkhardt
    Without @Cumberland Highpower showing a pic I still don't know what it looks like. I tried to look at CRC and still can't tell which one it is, you got the link or pic by any chance.
  23. Burkhardt
    like this?
  24. Burkhardt
    After looking at that I'm glad you told me not to get that one, I'd never get it to work.
  25. Burkhardt
    The download takes you to a video review of the actual pattern that is sold on Etsy
×
×
  • Create New...