LatigoAmigo

I used to have that problem until I got myself a rivet setter. Since then, no problems at all!

Absolutely stunning. Very nice work.

I sure do.

I count my blessings, believe me.

You might take a gander at The Hide House. I go there all the time and see them shipping hides all over the world. Plus, they are really nice folks. https://www.hidehouse.com/

I have had pretty good luck with what is referred to as "bonded leather." Here is a link to an Etsy site that sells it, and there are others. The big advantage is that the material is thin, strong, even color and relatively inexpensive. I have used it successfully many times. https://www.etsy.com/listing/757729222/salpa-bonded-leather-reinforcement?ref=landingpage_similar_listing_top-3&frs=1

I leave the strips in the dye and stir them around at least 3 times, making sure that I get full coverage, then I leave it in the dye for at least 1/2 hour to get full penetration. Then I hang it up to dry. I leave whatever dye is left in the container (I use a large jar) for future dipping.

So what are you making with it? Have any pics to share?

I'm interested. What makes it great?

Well, he put on the brake and took a break. Works for me.

You might try contacting the suppliers who advertise on this site. Maverick Leather would be a good place to start. You could search their website to see if anything interests you. https://maverickleathercompany.com/

Leather working is a tough business, and very few make it, so most of us on this site are hobbyists and happy.

I feel your pain. I've been faced with the same problem, and resolved it by installing hidden snaps. Maybe place a ligne 24 snap in between the magnets.

You will want to check out Ohio Travel Bag. They sell this press (for $199, so you got a super good deal) and the many dies that work with it, including rivets, snaps and grommets. As far as cheaper, not sure. https://ohiotravelbag.com/products/t-1490?_pos=2&_sid=f368b4fbb&_ss=r&variant=30411959009364

A few years ago one of my coworkers retired, and to celebrate he went to Hawaii. To rub it in, he sent us greetings engraved on a coconut. It arrived by USPS, but was certainly outside of the first class letter rate for size and weight. Probably considered a parcel, which uses a different set of rules and rates.

Something like this is what comes to mind.

The ability to have tight, even stitches that really apply pressure to hold the leather over time. I often throw in an overhand knot to ensure even tension.

Sure... here is the link: http://www.campbell-randall.com/product/italian-twist-press-no-3

This might help...

Amazon is not broke everywhere... I found them in stock right now, but maybe it is only here in the states.

You nailed it... here are the two that got posted.

On this site .jpg files work best, but these images are not in that format but in something that Photoshop does not recognize. Is there any way you can convert these images to .jpg file format?

That's great. You might want to post the images themselves, because the link that you posted to view them can get lost over time, and so will the ability to view the images of your good work.

You might try something like installing a bathroom fan, mount it over your workspace and vent it out your window. Or even a kitchen/stove style fan with a hood. I have a more severe fume issue (due to a laser cutter), and since the fumes were bothering my neighbor, I have installed a fume extractor, which collects the smell and doesn't require outside venting. A bit pricey though.

Then you might want to look to Al Stohlman's books for inspiration. You can find them at this Tandy link, and also on Amazon, EBay, etc. He clearly details the fundamentals. https://www.tandyleather.com/en/category/stohlman-leather-craft-books